Manejo en Tiempo Real de la Gran Red de Suministro de Agua Utilizando del Sistema de Control basado en Red STARDOM

Metropolitan Waterworks Authority logo
Descargas (487 KB)

Background of This Project

Metropolitan Waterworks Authority (MWA)
Metropolitan Waterworks Authority (MWA)

Thailand's Metropolitan Waterworks Authority (MWA) supplies drinking water to 1.8 million customers in a 2,100 km2 region encompassing greater Bangkok and the neighboring provinces of Nonthaburi and Samut Prakarn. A significant challenge impacting the efficiency of the MWA's water distribution network is the problem of water loss caused by damage to pipes and equipment, inaccurate water meters, and other reasons. In 2005 the MWA launched a project that would address this problem through improved management of water distribution. Its initial goal was to reduce water loss to 30% by 2006 and then to maintain it at this level through to the year 2017.

In order to bring the MWA a real-time monitoring and management capability, Yokogawa Thailand installed STARDOM controllers along with Yokogawa pressure transmitters, magnetic flowmeters, and ultrasonic flowmeters at key points throughout this distribution network.

Water distribution / Water treatment plant

The Challenges and the Solutions

Bangkok is a rapidly expanding city with an ever increasing demand for basic services, including water supply. To meet demand, the MWA plans to build more than 1000 block stations and to set up branch piping for each of these stations. Realtime data monitoring at each of these block stations is essential to bringing the water loss issue under control.

Achieving an accurate water loss management system while keeping the running costs to a minimum was a real challenge in this project. Yokogawa met this challenge by providing STARDOM FCJ controllers that function as intelligent remote terminal units (RTUs).

Specific advantages of the STARDOM FCJ controller include:

  • Interfaces that support the use of GPRS, PSTN, and ADSL networks
  • Embedded network fail-over detection and automatic reconnection functions that reduce GPRS network instability
  • Data logging functions to protect against data loss in the event of network failure
  • Supports flexible system scalability and interconnectivity with other systems

More than 200 Yokogawa STARDOM FCJ controllers have been installed to date, enabling the MWA's monitoring system to collect data from widely dispersed block stations and monitor for leaks using a leakage check algorithm. Via a telephone network, a central operations center continually monitors this system.

The Benefits

The improved monitoring system has achieved the expected reduction in water loss. The real-time monitoring capability supports a core active leakage control function that responds to losses in the water pipe network. Abnormal conditions, particularly burst water pipes, are discovered much sooner, and it is easier to pinpoint leak locations. In addition to improving the efficiency of the loss management program, work efficiency and cost performance as well as employee morale have been improved. As a result, the quality of services provided to end customers is gradually increasing.

System Configuration

System Configuration

System Details:

STARDOM FCJ controllers (220 units)
ADMAG AXF flowmeters (190 units)
EJA pressure transmitters (1210 units)

RTU FCJ cabinet and FCJ/AXF/EJA
RTU FCJ cabinet   FCJ/AXF/EJA

Customer Satisfaction

According to Vithaya Anuvongnukroh, Director of the MWA's Integrated Water Losses Management Technology Department and the person in charge of this improvement project, Yokogawa's instruments met the requirements for the MWA's water supply system. The MWA procured a total of 220 STARDOM FCJ controllers and 1400 Yokogawa meters for this monitoring system. Yokogawa completed work on this project in May 2008. MWA expects that the increased accuracy and reliability of its water distribution data will help reduce and control losses.

Mr. Vithaya hopes that the MWA and Yokogawa Thailand can use the experience gained through this improvement project to collaborate in the development of improved products for the water supply sector.

Operation room at Bangkok water loss management office

Operation room at Bangkok water loss management office

Vithaya Anuvongnukroh, Director of MWA

Vithaya Anuvongnukroh Director of MWA

 

Industrias

  • Agua y agua residual

    Yokogawa ha estado suministrando soluciones de control para la producción hídrica sostenible desarrollando tecnología con mayor eficiencia energética, ayudando a reducir la huella de carbono de las operaciones y fabricando productos de gran solidez que protegen el ambiente contra los contaminantes. Con nuestra tecnología de vanguardia y amplios conocimientos de las aplicaciones, trabajamos con usted para proveer soluciones hídricas sostenibles que impulsen su negocio y agreguen alto valor a lo largo del ciclo de vida de la planta. Nuestra tecnología y nuestros productos mejoran el desempeño de las plantas y garantiza que puedan operar competitivamente en los mercados del agua de hoy, así como reducir sus costos operativos. Yokogawa brinda apoyo en una amplia gama de aplicaciones para el control del agua en los mercados del agua tanto públicos como privados.

    Leer Más
  • Distribución del agua

    Un problema crítico para una red de distribución de agua son las fugas de agua en la tubería. Yokogawa proporciona soluciones de gestión de pérdidas de agua para minimizarlas de la red de distribución de agua, reduciendo así el agua no registrada.

    Leer Más
  • Tratamiento de aguas

    Yokogawa ofrece soluciones óptimas para mejorar el funcionamiento confiable de las plantas de tratamiento de agua. Estas soluciones incluyen tecnologías sofisticadas, una calidad del producto sin igual y la extensiva aplicación de conocimientos a lo largo de todo el ciclo de vida.

    Leer Más

Productos y Soluciones Relacionadas

  • ADMAG AXF

    El medidor de flujo magnético ADMAG AXF es un producto sofisticado con una gran confiabilidad y facilidad de operación, desarrollada sobre décadas de experiencia en el campo. Basado en las especificaciones FOUNDATION™ Fieldbus, los modelos de medidores de flujo magnéticos AXF Fieldbus ofrecen una instrumentación más flexible.

    Leer Más
  • FCJ All-in-one PLC/RTU

    The brick type model FCJ autonomous controller fulfills the basic requirements of the utility control. It also provides the reliability for the SCADA communication with network redundant capability.

    Leer Más
  • Medidores de Flujo Magnéticos

    La experiencia de Yokogawa con medidores de flujo magnéticos se extiende por décadas. Nuestros medidores de flujo magnéticos ofrecen configuraciones flexibles para uso industrial en la mayoría de las áreas.

    Leer Más

Top