South Africa ZA   
Can you tell me how to set alarms and perform contact output (DO output) with SMARTDAC+ GX/GP series?

Can you tell me how to set alarms and perform contact output (DO output) with SMARTDAC+ GX/GP series?

This requires a DO output module. The following is an example in which the DO output module is installed into slot 1, and DO output is performed at alarm level 1 on DO channel 1. If your module is already installed, you must reconfigure it.
Set alarms (alarm level 1), turn detection ON, set the output destination to “Relay,” select output destination number “0101,” and then tap Save. For details, see “Advanced Operation (Various settings and operation)” in the first step guide (IM 04L51B01-02EN).

Related Products & Solutions

  • Touch Screen GP10/GP20

    SMARTDAC+TM GP10/GP20 is a paperless recorder that provides intuitive, human-centric design, web-enabled functionality, and scalable architecture.

    See More

  • Touch Screen Paperless Recorder GX10/GX20

    The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GX utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    See More
Top