Temperature - Can the YTA610/710 be attached to a sensor?

Sensor Attachment

Yokogawa offers a full line of Burns® Engineering temperature sensors, with and without thermowells, that can be attached to a YTA610 or YTA710. 

When specifying the sensor to be attached:

• Use the /TT1 option on the Burns Engineering sensor model code. This code directs the factory to attach the sensor to the YTA610/710.
• Ensure that the electrical connection of YTA610/710 is 1/2-inch NPT. If it is not, the sensor will require an adapter.
• If the YTA610/710 has an agency approval, ensure that the Burns Engineering sensor has the same agency approval. 
• The U-length (Thermowell) or L-length (Direct Immersion sensor) on the sensor is limited to 24-inches.

For more information, contact your local Yokogawa representative.