智能使用者界面
多種顯示功能
- 清楚顯示帶包含單位和標籤的channel數據，以及警報日誌，訊息日誌和其他事件日誌。
- 新的自定義顯示功能（選配）允許在螢幕上放定圖形圖像。
觸控螢幕，直覺式操作
- 新的觸控螢幕提供滑動，捏合/縮小，以及輕觸和拖動控制，以快速導航常見的顯示模式功能。
- 使用“2點觸控”可以在顯示範圍的方向上放大或縮小。
支援手繪信息
- 操作員可以使用手寫筆或手指直接在觸控螢幕上書寫訊息。
智能建構
增加I / O模組
- 完全模組化的I / O設計允許您使用當前所需的channel構建系統，並可隨時購買和安裝其他模組擴充設備功能。
廣泛的輸入/輸出規格
- 10 channel通用輸入模組可測量直流電壓，熱電偶，RTD和接觸輸入訊號。 提供16 channel數字輸入模組和繼電器輸出模組。
- GX90XA類比輸入模組：直流電壓，直流電流，熱電偶，RTD，接點
- New! GX90XA-10-V1：高耐壓AI模組：最大。 共模電壓600V
- GX90XA-04-H0高速AI模組：直流電壓，直流電流，熱電偶，RTD，接點
- GX90XA-06-R1 4線RTD模組：4線RTD，4線電阻
- GX90YA類比輸出模組：電流輸出（點數間隔離）
- GX90XD數位輸入模組：遙控輸入或操作記錄
- GX90YD數位輸出模組：警報輸出
- GX90WD數位輸入/輸出模組：遙控輸入或操作記錄/警報輸出
- GX90XP脈衝輸位模組：脈衝訊號數據收集，積分計數
- GX90UT PID控制模組：PID控制（2迴路）
面板可選擇白色或黑色
- 為您的操作環境選擇最佳顏色。
多點數l I / O.
- GX10和GX20分別支援最多30個和100個 Channel輸入。
- 擴充單元提供多達450個輸入，輕鬆實現與記錄器的乙太網連接。
智能功能
PID 控制
- 啟用PID和程式控制（每個系統最多20個循環）
- 網路應用程式支援從瀏覽器進行遠端操作和監視。
- 提供各種預先設定的控制和顯示螢幕。
- 設定點程式控制功能（最多99個模式）
雙重測量範圍
- 使用者可以在單個GX系統上選擇兩個不同的掃描間隔。
直接輸出印表機
- 可直接從GX列印報告和快照，無需透過電腦。
方便的報表功能
- 可以使用Excel的電子表單自動建立報告，還可以輸出為PDF文件。
網路瀏覽器的實時監控* *
- 網路瀏覽器連結GX可使用兩種操作模式 - 數據和設定。
支援21 CFR Part 11（選配）
- 支援美國FDA 21 CFR Part 11（用於製藥）。
輕鬆連接WT系列功率計（選配）
- 從功率測量儀器（WT系列，功率分析計）輕鬆收集和記錄測量數據。
DARWIN相容功能（乙太網，RS-422/485，RS-232）
- 從DARWIN資料收集器順利升級。
多批次功能（選配）
- 記錄器預先定義的Channel組，用於獨立的啟動/停止控制分隔數據文件。
SLMP通訊（三菱PLC）（選配）
- 可以在沒有sequence的情況下從GX連接到三菱電機PLC的協議功能。
OPC-UA伺服器（選配）
- 可以透過主機系統（OPC-UA客戶端）的乙太網連接GX收集的數據。
支援航空熱處理應用AMS2750 / NADCAP
- 校正時間表控制功能（選配）用於週期性執行校正配定等的時間表管理。
* 關於SMARTDAC +系列網路瀏覽器的Java Plug-in注意事項
關於 OpreX
OpreX是橫河電機工業自動化（IA）和控制業務的品牌。 OpreX代表橫河電機與客戶共同創造價值的卓越技術和解決方案，並涵蓋橫河電機的整個IA產品，服務和解決方案。 OpreX品牌包括以下五個類別：OpreX 轉型化，OpreX 控制，OpreX 測量，OpreX 執行和OpreX 生命週期。 無紙記錄器GX10 / GX20是OpreX資料收集產品系列的一部分，與OpreX測量保持計術同步。 OpreX 測量包含高精度測量，資料收集和分析的現場設備和系統。
橫河電機將透過OpreX品牌理念及技術提供滿足特定需求的整合解決方案，並協助客戶轉型和拓展業務。
Details
直覺式的使用者介面，使用簡單
有效搜尋關鍵數據
輕鬆查看歷史數據
輕鬆顯示歷史趨勢 – 快速滑動或拖動以滾動數據，測量期間也能使用同樣方法。
使用日曆和摘要螢幕快速查找數據
可從日曆中跳到特定日期的波形圖，從警報摘要中，跳到警報發生時點的波形圖。
輕鬆檢查問題點
手寫訊息
立即用手寫訊息確認想觀察的地方。
您可以使用觸控筆（標準附件）或手指在波形區域上繪製或手寫，還可以選擇顏色和線寬。 或是從預設消息列表中進行選擇。
保存並輸出圖檔文件
可將警報期間顯示的趨勢波形或螢幕儲存為圖檔（PNG）文件，並同時進行列印。
可確認波形圖的詳細內容
在任意位定顯示數值
移動比例顯示該定對應位的數值。 立即檢查最大/最小測量值。
[Patent technology]
一目瞭然長期趨勢
顯示所有歷史趨勢
可以在單個螢幕上安裝長期趨勢，以便於查看。
顯示所有歷史趨勢
放大/縮小 - 時間軸和工程單位
時間軸和工程軸可以使用簡單的內推和分開功能進行擴充和壓縮
內縮和分開功能
建立自己的螢幕
自定義顯示（/ CG選項）
您可以按照自己喜歡的方式排列顯示對象（如趨勢圖，數字圖和條形圖），建立針對環境的監視器顯示。 啟動/停止泵並執行其他操作。
客製化建構軟體
DAQStudio DXA170
DAQStudio是用於建立自行定義顯示的軟體。 透過乙太網或外部儲存媒體（SD / USB）將建立的螢幕加載到GX上並顯示。
各種顯示螢幕
數量以對數刻度顯示和記錄。
多面板顯示
您可以從9種佈局中進行選擇，最多可保存20種設定。 （僅限GX20的多功能面板）
靈活和可擴充的架構
模組化輸入/輸出
輸入和輸出是模組化的設計，擴充方便。 GX無紙記錄器主機可提供多達100個點數（GX20）的測量。
多種輸入/輸出模組
可選擇多種輸入/輸出模組。
| 型號 | 名稱 | 測量/應用 | Channel |
|---|---|---|---|
| GX90XA-10-U2 | Analog input module | DC voltage, DC current (with external shunt resistor connected), thermocouple, RTD, contact (solid state relay scanner type) | 10 |
| GX90XA-10-L1 | DC voltage, DC current (with external shunt resistor connected), thermocouple, contact (Low withstand voltage solid state relay scanner type) | 10 | |
| GX90XA-10-T1 | DC voltage, DC current (with external shunt resistor connected), thermocouple, contact (electromagnetic relay scanner type) | 10 | |
| GX90XA-10-C1 | DC current (mA) (solid state relay scanner type) | 10 | |
| GX90XA-10-V1 | DC voltage, DC current (with external shunt resistor connected), thermocouple, contact (Solid state relay scanner type) | 10 | |
| GX90XA-04-H0 | DC voltage, DC current (with external shunt resistor connected), thermocouple, RTD, contact (individual A/D type) | 4 | |
| GX90XA-06-R1 | 4-wire RTD, 4-wire resistance (solid state relay scanner type) | 6 | |
| GX90YA | Analog output module | Current output | 4 |
| GX90XD | Digital input module | Remote control input or operation recording | 16 |
| GX90YD | Digital output module | Alarm output | 6 |
| GX90WD | Digital input/output module | Remote control input or operation recording/alarm output | DI:8/DO:6 |
| GX90XP | Pulse input module | Pulse signal data acquisition, integral count | 10 |
| GX90UT | PID control module | PID control (2 loop) | AI:2/AO:2 DI:8/DO:8 |
可擴充到多達450個點數（實際輸入）
支援多達450個測量點數。如果包含MATH和通訊點數，GX20大容量記憶體款式最多可記錄1000個點數。 GX主單元和可擴充I / O都可以使用相同的輸入/輸出模組。
無需使用hub或repeater，即可直接連接網路線。
* 您還可以連結GM資料收集系統的子單元。
| 型號 | 類型 | 最大點數 | 依據系統架構的點數數量 | |
|---|---|---|---|---|
| GX10 | Standard | 100ch | Main unit only | 0-30 |
| Main + expandable I/O | 0-100 | |||
| GX20 | Standard | 100ch | Main unit only | 0-100 |
| Main + expandable I/O | 0-100 | |||
| Large memory | 450ch | Main unit only | 0-100 | |
| Main + expandable I/O | 0-450 | |||
點數僅用於類比輸入。
分佈式安裝減少配線
若記錄器安裝在現場（遠離DUT），您可以將可擴充I / O放定在現場並監控數據，無需熱電偶和其他傳感器的長距離佈線。
全面的網路功能和軟體
從網路瀏覽器進行即時遠端監控
透過網路瀏覽器，您可以同步即時監控GX並更改設定，輕鬆建構低成本無縫式遠端監控系統，無需額外的軟體。
即時監控螢幕
您可以同步查看GX主機螢幕上的即時趨勢圖、數字顯示和其他顯示。
使用網路瀏覽器線上輸入設定
螢幕設定可將AI點數設定和其他訊息複製到Excel進行編輯。編輯後，可以將內容重新導入螢幕設定。
專用軟體（免費下載）可用於讀取波形圖和GX設定。
通用閱覽者( viewer )
可以查看和列印保存在GX的數據資料，並針對區域執行統計計算並匯出為ASCII，Excel或其他格式。
離線軟體設定
保存設定或傳輸到GX。
支援航空熱處理應用AMS2750 / NADCAP
校準校正排程控制功能（/ AH選項）
用於週期性執行校準校正設定等的時間表管理。 可針對模組單位和傳感器單獨設定校正因子。 TUS報表軟體可輕鬆建立TUS（溫度均勻性調查）報告。
*有關TUS軟體，請聯繫我們。
將數據記錄依各個設備單獨儲存在不同的檔案夾
多批次功能（/ BT選配）
記錄器預先定義的點數群組區分檔案夾，可獨立啟動和停止控制。 最多可以建立12個獨立批次。
PID 控制功能
控制功能
啟用PID和程式控制
- PID 控制模組
每個模組2個循環，每個系統最多20個循環 - 設定點程式控制功能（/ PG選配）
最多99個pattern
遠端操作和監控
網路應用程式支援從瀏覽器進行遠端操作和監視。
內建控制螢幕和顯示
供各種預先設定的控制螢幕和顯示。
無縫整合
將複雜的傳統控制面板整合成到一個簡單靈活的資料收集站。
客製化顯示
可以透過為特定系統定制的螢幕進行遠程操作。
高速測量 (最低1秒)
橫河電機專利的A / D轉換器可讓高速模組以1秒的速度測量數據點。
- 高速測量 (1秒) *
- 專利 A/D 轉換器
每個模組1ch。 第2秒鐘，每個模組2 ch，以及第5秒鐘或更多時，每個模組4 ch。
| 型號 | 掃描間隔 | ||
|---|---|---|---|
| 1ms | 2ms | 10ms | |
| GX10 | 1ch | 5ch | 10ch |
| GX20-1 | 1ch | 5ch | 10ch |
| GX20-2 | 5ch | 25ch | 40ch |
雙間隔測量，具有兩個不同的掃描間隔
使用者可以在單個GX / GP系統上選擇兩個不同的掃描間隔。這樣可以靈活地在單個系統中以兩個不同的掃描間隔測量各種類型的輸入。 例如有效同時測量溫度之類的緩慢波動的訊號，以及壓力和振動之類的快速變化的訊號。 可以將模組分配給測量群組。
MATH（包括報表）和事件動作
MATH功能（/ MT選配）
支援各種數學計算，包括基本數學和函數（平方根，對數，三角函數）。 使用變量為測量或計算數據編寫公式並保存或顯示結果，節省後處理的時間和精力。 使用報表功能建立每小時，每日，每月和其他報告。
事件動作
能夠在資料收集站的操作期間分配與特定事件相關的動作。
報表製作網路功能（/ MT選配）
提供多種方便的網路功能
Modbus / TCP和Modbus / RTU通訊
GX支援乙太網通訊的Modbus TCP / IP client端和伺服器模式以及用於選配串列通訊的Modbus RTU主從模式(Master-Salve)。
Modbus/TCP (乙太網連結)
使用Modbus / TCP和Modbus / RTU功能，您可以在GX上顯示和儲存來自伺服器和附屬設備的數據。
* 需具有通訊點數 (/MC 選配 )
(最多可連接16個Modbus / TCP伺服器，GX20-2最多可連接32個)
(最多可連接31個Modbus / RTU slave站)
Modbus/RTU (RS-422/485連線)
使用Modbus / TCP和Modbus / RTU功能，您可以從上游設備收集GX資料數據。
EtherNet / IP功能（/ E1選配）
GX支援EtherNet / IP伺服器功能，可以從PLC或其他設備連結GX並讀取測量/ MATH點數或寫入通訊輸入點數（GX10：最大50 ch，GX20-1：最大300 ch，GX20-2：最大500 ch）。
* 需要通訊點數功能（/ MC選配）。
CC-Link系列SLMP 通訊 (/E4選配)
Protocol 協議功能，無需Sequencer程序記錄器即可從GX連結到三菱電機PLC。 您可以將GX作為SLMP client端運行，將GX測量數據寫入PLC並將PLC數據寫入通訊點數。
*需要通訊點數功能（/ MC選配）。
儀表性能評估測試的強大工具（/ E2和/ MC選配）
以在不損失GX保真度的情況下收集來自功率測量儀器（WT系列功率分析儀）的高精度測量數據，並與GX自己的測量數據一起記錄和顯示。 這是性能評估測試的理想選擇，因為您可以同時記錄器功耗，溫度和其他現象。
- 可以連結接的型號:
Yokogawa Test & Measurement Corp.,
WT 系列功率分析計
WT300/WT300E (command mode WT300), WT500, WT1800/WT1800E (command type WT1800) - 最大連線數:
8 (GX10), 16 (GX20)
OPC-UA 伺服器 (/E3 選配)
可以透過主機系統（OPCUA client端）的乙太網通訊存取GX的收集數據。 從上游系統寫入GX通訊點數需要通訊點數功能（/ MC選配）。
與DARWIN相容的通訊方式
GX支援DARWIN通訊指令。 在GX上使用您的DARWIN通訊程式。
*有關詳細內容，請聯絡我們。
CENTUM / STARDOM通訊套裝
- CENTUM: LFS2432, DARWIN/DAQSTATION Communication package (適用 ALE111 [乙太網])
- STARDOM: NT365AJ DARWIN connection package
FTP-based 文件傳輸
FTP client/server 功能可輕鬆共享和管理來自文件伺服器中心的數據資料。
E-mail 訊息功能
GX可以發送各種電子郵件，包括警報通知，定期即時數據資料，計劃報告和其他訊息。
自動網路設定（DHCP）功能
使用動態主機設定協議（DHCP），GX可以自動收集DHCP伺服器進行網路通訊所需的設定（IP地址）。 這使得在工廠網路上安裝設備變得前所未有的簡單。
網路時間同步伺服器
GX在客戶端模式下使用SNTP協議從網路時間伺服器收集時間訊息。 該功能允許設施內任意數量的GX模組具有精確同步的時間; 所有模組都將記錄同步後的日期和時間標記的數據。 此外，GX可以作為伺服器，為網路上其他SNTP客戶端單元提供時間數據。
堅固耐用的硬體和高度安全性
安裝設計選擇
放心保存數據記錄
測量和計算的數據被連續儲存到安全的內部非揮發性記憶體中。 在手動或預定的時間間隔內，儲存的文件會複製到可移動式媒體。 此外，可以將文件複製並儲存到FTP伺服器。
非揮發性記憶體的可靠性和安全性，在任何操作條件或電源故障事件下丟失數據的可能性非常微小。
根據您的應用選擇文件格式
為了提高安全性，可以以二進位格式檔儲存測量數據。 在傳統的文件編輯器或其他程式，很難破解或修改。 選擇文件格式可以在文件編輯器或電子表格程序中輕鬆直接打開數據， 無需專用軟體即可處理測量數據。
ASCI 資料顯示
二進位資料顯示
支援21 CFR Part 11 (/AS 選配)
透過擴充的安全功能選項，儀表支援美國FDA的Title 21 CFR Part 11法規（針對製藥業）。 可以連結憑證的登錄功能，電子簽名，稽核追朔，防篡改功能，Active Directory的密碼管理功能，登錄功能和其他功能。
安全性增強
安全地發送和接收客戶數據。
SSL: 透過TCP / IP網路傳輸的加密數據。
前面板鎖
可以鎖定前面板門以防止錯誤操作電源開關或外部媒體。
類比前端模組
獨特的A / D轉換器可提供高速，高精度的資料收集。 （高速AI，PID控制模組）
支援多種標準
GX90XA : 類比輸入模組
規格
| 型號 | GX90XA | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Input type (Inputs: 10) | DC voltage*1, standardized signal*1, thermocouple*1, RTD*2, DI*1, DC current (with external shunt resistor)*1, DC current*3, resistance*4 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| DCV | 20 mV, 60 mV, 200 mV, 1 V, 2 V, 6 V, 20 V, 50 V, 100 V*5 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Standard signal | 0.4-2 V, 1-5 V | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Resistance | 20, 200, 2000 Ω | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Thermocouple | R, S, B, K, E, J, T, N, W, L, U, W97Re3-W75Re25, KpvsAu7Fe, Platinel 2, PR20-40, NiNiMo, W/WRe26, N(AWG14), XK GOST | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| RTD | Pt100, JPt100, Cu10 GE, Cu10 L&N, Cu10 WEED, Cu10 BAILEY, Cu10 (20°C) α=0.00392, Cu10 (20°C) α=0.00393, Cu25 (0°C) α=0.00425, Cu53 (0°C) α=0.00426035, Cu100 (0°C) α=0.00425, J263B, Ni100 (SAMA), Ni100 (DIN), Ni120, Pt25, Pt50, Pt200 WEED, Cu10 GOST, Cu50 GOST, Cu100 GOST, Pt46 GOST, Pt100 GOST, PT500*4, PT1000*4 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| DI | Level, Contact | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| DC current | 0-20 mA, 4-20 mA | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Scan intervals | 1/2/5/10/20/50/100/200/500ms, 1/2/5s Scan interval by type
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Power supply and consumption | Supplied from main unit, power consumption: 2 W or less | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Insulation resistance | Between input circuits and internal circuitry: 20 MΩ or greater (at 500 V DC) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Withstand voltage | Between the input circuits and the internal circuitry: 3000 VAC for one minute (current input type and low withstand voltage type: 1500 VAC for one minute, high withstand voltage type: 3700 V AC for one minute) Between analog input channels: 1000 V AC for one minute (excluding b terminals for universal input type) (low withstand voltage type: 400 VAC for one minute, high speed universal type: 3000 V AC for one minute) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Terminal types | M3 screw terminals or clamp terminals | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | Approx. 0.3 kg | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
*1 Cannot be set for the current input type (type suffix code: -C1) or 4-wire RTD/resistance type (type suffix code: -R1).
*2 Cannot be set for the current input type (type suffix code: -C1), electromagnetic relay type (type suffix code: -T1), low withstand voltage type (type suffix code: -L1) or high withstand voltage type (type suffix code: -V1).
*3 Can only be set with current input type (type suffix code: -C1).
*4 Can only be set with 4-wire RTD/resistance type (type suffix code: -R1).
*5 Can only be set with high speed universal type (type suffix code: -H0).
Model and Suffix Codes
| Model | Suffix Code | Description | ||||
|---|---|---|---|---|---|---|
| GX90XA | Analog input module | |||||
| Number of channels | -04 | 4 channels (-H0 type only) | ||||
| -06 | 6 channels (-R1 type only) | |||||
| -10 | 10 channels (-C1, -L1, -U2, -T1, -V1) | |||||
| Type | -C1 | Current, scanner type (isolated between channels) | ||||
| -L1 | Low withstand voltage DCV/TC/DI, scanner type (isolated between channels) | |||||
| -U2 | Universal, Solid state relay scanner type (3-wire RTD b-terminal common) | |||||
| -T1 | DCV/TC/DI, Electromagnetic relay scanner type (isolated between channels) | |||||
| -H0 | High speed universal, individual A/D type (isolated between channels) | |||||
| -R1 | 4-wire RTD/resistance, scanner type (isolated between channels) | |||||
| -V1 | DCV/TC/DI, high withstand voltage scannertype (Isolated between channels) | |||||
| - | N | Always N | ||||
| Terminal form | -3 | Screw terminal (M3) | ||||
| -C | Clamp terminal | |||||
| Area | N | General | ||||
GX90YA : 類比輸出模組
Specifications
| Model | GX90YA |
|---|---|
| Output type (outputs: 4) | Transmission output, manual output |
| Range | 4–20 mA or 0–20 mA |
| Output update interval | 100 msec (shortest) |
| Load resistance | 600 Ω or less |
| Resolution | 0.002% |
| Power supply and consumption | Supplied from main unit, power consumption: 3W or less |
| Insulation resistance | Between output circuits and internal circuitry: 20 MΩ (at 500 VDC) |
| Between output channel terminals: 500 VDC, 20 MΩ or greater | |
| Withstand voltage | Between output circuits and internal circuitry: 1500 AC for one minute |
| Between output circuits: 500 VAC for one minute | |
| Terminal type | M3 screw terminals or clamp terminals |
| Weight | Approximately 0.2 kg |
Model and Suffix Codes
| Model | Suffix Code | Description | ||||
|---|---|---|---|---|---|---|
| GX90YA | Analog output module | |||||
| Number of channels | -04 | 4 channels | ||||
| Type | -C1 | Current output (isolated between channels) | ||||
| - | N | Always N | ||||
| Terminal form | -3 | Screw terminal (M3) | ||||
| -C | Clamped terminals | |||||
| Area | N | General | ||||
GX90XD : 數位輸入模組
Specifications
| Model | GX90XD | |
|---|---|---|
| Input types (Inputs: 16) | DI or pulse input*1 (Open collector or non-voltage contact) | |
| ON/OFF detection | Open collector: Voltage of 0.5 V DC or less when ON, leakage current of 0.5 mA or less when OFF Non-voltage contact: Resistance of 200 Ω or less when ON, 50 kΩ when OFF | |
| Contact rating | 12 V DC, 20 mA or more | |
| Power supply and consumption | Supplied from main unit, power consumption: 0.7 W or less | |
| Insulation resistance | Between input terminals and internal circuitry: 20 MΩ or greater (at 500 V DC) | |
| Withstand voltage | Between input terminals and internal circuitry: 1500 V AC for one minute | |
| Terminal types | M3 screw terminals or clamp terminals | |
| Weight | Approx. 0.3 kg | |
Pulse input specifications*1
| Counting system | The rising edge of the pulse is counted. |
|---|---|
| Max. pulse period | 250Hz (The chattering filter : OFF) 125Hz (The chattering filter : ON) |
| Minimum detection pulse width | Low (close), High (open), both is 2 ms or more |
| Pulse detection period | 1ms |
| Pulse measurement accuracy | ± 1 pulse |
| Pulse count interval | Measurement interval |
| Filter | The chattering filter can be switched On/Off. (When the chattering filter is off, connect GX/GP so that it is not affected by the noise.) |
*1 Integration requires the math function (optional code /MT).
Model and Suffix Codes
| Model | Suffix Code | Description | ||||
|---|---|---|---|---|---|---|
| GX90XD | Digital input module | |||||
| Number of channels | -16 | 16 channels | ||||
| Type | -11 | Open collector/Non-voltage, contact (shared common), Rated 5 VDC | ||||
| - | N | Always N | ||||
| Terminal form | -3 | Screw terminal (M3) | ||||
| -C | Clamp terminal | |||||
| Area | N | General | ||||
GX90YD : 數位輸出模組
Specifications
| Model | GX90YD |
|---|---|
| Output types (outputs: 6) | Relay contact (c contact) |
| Rated load voltage | 100 to 240 V AC or 5 to 24 V DC |
| Max. load voltage/current | 264 VAC or 26.4 VDC, 3A/point (resistance load) |
| Power supply and consumption | Supplied from main unit, power consumption: 1.4 W or less |
| Insulation resistance | Between output terminals and internal circuitry: 20 MΩ (at 500 VDC) |
| Withstand voltage | Between output terminals and internal circuitry: 3000 V AC for one minute |
| Terminal types | M3 screw terminals |
| Weight | Approx. 0.3 kg |
Model and Suffix Codes
| Model | Suffix Code | Description | ||||
|---|---|---|---|---|---|---|
| GX90YD | Digital output module | |||||
| Number of channels | -06 | 6 channels | ||||
| Type | -11 | Relay, SPDT(NO-C-NC) | ||||
| - | N | Always N | ||||
| Terminal form | -3 | Screw terminal (M3) | ||||
| Area | N | General | ||||
GX90EX : 擴充型模組
Model and Suffix Codes
| Model | Suffix Code | Description | ||||
|---|---|---|---|---|---|---|
| GX90EX | I/O expansion module | |||||
| Port | -02 | 2 Ports | ||||
| Type | -TP1 | Twisted pair cable | ||||
| - | N | Always N | ||||
| Area | -N | Standard accessories | ||||
GX90WD : 數位輸入/輸出模組
Specifications
| Model | GX90WD | |
|---|---|---|
| Input types (Inputs: 8) | DI or pulse input*1 (Open collector or non-voltage contact) | |
| ON/OFF detection | Open collector : Voltage of 0.5 V DC or less when ON, leakage current of 0.5 mA or less when OFF Non-voltage contact : Resistance of 200 Ω or less when ON, 50 kΩ when OFF | |
| Contact input rating | 12 VDC, 20 mA or more | |
| Output type (outputs: 6) | Relay contact (C contact) | |
| Rated load voltage | When connected to the main circuit (fi rst-order power supply), 150 VAC or less When connected to a circuit derived from the main circuit (second-order power supply), 250 VAC or less (the main circuit is 300 VAC or less and uses an isolated transformer) or 30 VDC or less | |
| Max. load current | 2 A (DC)/2 A (AC), resistive load | |
| Power consumption | 1.9 W or less | |
| Insulation resistance | Between input terminals and internal circuitry: 20 MΩ or greater (at 500 VDC) Between output terminals and internal circuitry: 20 MΩ or greater (at 500 VDC) | |
| Withstand voltage | Between input terminals and internal circuitry: 1500 VAC for one minute Between output terminals and internal circuitry: 3000 VAC for one minute | |
| Terminal types | M3 screw terminals | |
| Weight | Approx. 0.3 kg | |
Each unit (GX/GP main unit and expandable I/O), can use 1 module only.
Pulse input specifications*1
| Counting system | The rising edge of the pulse is counted. |
|---|---|
| Max. pulse period | 250Hz (The chattering filter : OFF) 125Hz (The chattering filter : ON) |
| Minimum detection pulse width | Low (close), High (open), both is 2 ms or more |
| Pulse detection period | 1ms |
| Pulse measurement accuracy | ± 1 pulse |
| Pulse count interval | Measurement interval |
| Filter | The chattering filter can be switched On/Off. (When the chattering filter is off, connect GX/GP so that it is not affected by the noise.) |
*1 Integration requires the math function (optional code /MT).
Model and Suffix Codes
| Model | Suffix Code | Description | ||||
|---|---|---|---|---|---|---|
| GX90WD | Digital input/output module | |||||
| Number of channels | -0806 | 8 channel DIs, 6 channel DOs | ||||
| Type | -01 | Open collector/non-voltage contact (shared common), rated 5 VDC; Relay, SPDT, (NO-C-NC) | ||||
| - | N | Always N | ||||
| Terminal form | -3 | Screw terminal (M3) | ||||
| Area | N | General | ||||
GX90XP : 脈衝輸入模組
Specifications
| Model | GX90XP |
|---|---|
| Number of inputs | 10 |
| Measurement interval | 100 ms (shortest) |
| Input type | Contact (open collector, voltage-free contact), level (5 V logic) |
| Input range | Up to 20 kHz* * 30 Hz when the chattering filter is in use (On) |
| Minimum detection pulse width | 25 μs* * 15 ms when the chattering filter is in use (On) |
| Measurement accuracy | Count ± 1 pulse During integration, the following accuracies are added. Upon MATH start: +1 measuring period Upon MATH stop: -1 measuring period * Integration requires the math function (optional code /MT). |
| Chattering filter | Removes chattering up to 5 ms (can be turned on/off on each channel) |
| Hysteresis width | Approx. 0.2 V |
| Contact, transistor rating | Contact: 15 V DC or higher and 30 mA or higher rating. Minimum applicable load current 1 mA or less. Transistor: With the following ratings: Vce > 15 VDC, Ic > 30 mA |
| Maximum input voltage | ±10 V DC |
| Insulation resistance | Between input terminals and internal circuitry: 20 MΩ or greater at 500 V DC |
| Withstand voltage | Between input terminals and internal circuitry: 1500 V AC for 1 minute |
Model and Suffix Codes
| Model | Suffix code | Description | ||||
|---|---|---|---|---|---|---|
| GX90XP | Pulse input module | |||||
| Number of channels | -10 | 10 channels | ||||
| Type | -11 | DC voltage/open collector/non-voltage contact (shared common), rated 5 VDC | ||||
| — | N | Always N | ||||
| Terminal form | -3 | Screw terminal (M3) | ||||
| -C | Clamp terminal | |||||
| Area | N | General | ||||
GX90UT : PID 控制模組
Specifications
| Model | GX90UT | |
|---|---|---|
| Control loops | Number of loops | 2 |
| Analog input (measured input) | Measured points | 2 |
| Measurement type | DC voltage (DCV)/standardized signal, TC/RTD, DI (LEVEL and non-voltage contact)/DC current (with external shunt resistance) | |
| Scan (control) interval | 100 ms or 200 ms (system global setting) | |
| Analog output (control output/transmission output/sensor power supply) | Outputs | 2 |
| Output type | Power supply for current, voltage pulse, or sensors. | |
| Current output: 4-20 mA or 0-20 mA | ||
| Voltage pulse output: ON voltage = 12 VDC or more (load resistance 600 Ω or more), OFF voltage = 0.1 VDC or less | ||
| Can be used as a sensor power supply (13.0-18.3 VDC) | ||
| Digital input (switching the SP, operation mode, etc.) | Inputs | 8 |
| Input format | Non-voltage contact and open collector | |
| Contact rating: 12 VDC or more, 20 mA or more | ||
| Digital output (of alarms, events, etc.) | Outputs | 8 |
| Output format | Open collector (sink type) | |
| Output contact capacity | Max 24 VDC, 50 mA | |
| Withstand voltage/insulation resistance | See PID control module general specifications (GS 04L51B01-31EN) | |
| Terminal type | M3 screw terminals | |
| Weight | Approximately 0.3kg | |
Model and Suffix Codes
| Model | Suffix Code | Description | ||||
|---|---|---|---|---|---|---|
| GX90UT | PID control module | |||||
| Number of loops | -02 | 2 loops | ||||
| Type | -11 | 8 DIs, 8 DOs | ||||
| — | N | Always N | ||||
| Terminal form | -3 | Screw terminals (M3) | ||||
| Area | N | General | ||||
-
【Support Information】List of Verified SD Memory Cards (SD Cards)
The SD cards of the following manufacturers have been verified for use with SMARTDAC+ GX/GP/GM, μR10000/μR20000 and FX1000. However, please note that Yokogawa does not guarantee normal operation of the SD card when using with products listed below.
-
【Support Information】List of Verified USB Barcode Reader
The USB barcode reader of the following manufacturers have been verified for use with the SMARTDAC+ GX/GP series, DXAdvanced series. However, please note that Yokogawa does not guarantee normal operation of the USB barcode reader when using with products listed below.
-
【Support Information】List of RoHS
This is a list of recorder and controller products that support the RoHS (2011/65/EU) directive.
-
【Support Information】New Legislative Framework (NLF) Conforming Products
This is a list of recorder and controller products that support the New Legislative Framework (NLF.)
-
【Support Information】Display Language Support List for Recorders
List of languages that can be set for each model.
-
GM10模組化資料收集器
GM10適用於工業和實驗室應用，藍牙無線連接和模組化I / O功能，提供準確可靠的測量。
參考
Okinawa Cellular Telephone Company has launched an experimental vegetable factory to encourage farmers in the prefecture to enter into that business. The 80 square meter vegetable factory engages in hydroponics, and uses 100% artificial lighting. Located at Nanjo City in the southern part of Okinawa island, the facility holds six levels of beds dedicated to raising greens like romaine and leaf lettuce.
S&B Sankyo uses the GX20 Paperless Recorder to monitor temperature and pressure in a food processing plant's sterilization process.
One important risk to manage with regard to coal stacks is preventing fires due to spontaneous combustion.
This recorder can efficiently control the heat treatment process, which is a critical control point (CCP) of HACCP, a hygiene management method in the food production process . It measures and records F values and elapsed time in the sterilization process of food and pharmaceuticals.
The SMARTDAC+ GX Series monitor furnace temperature in tunnel kiln furnaces and the like using Faceplate and Trend screens that come as standard features.
Continuous technology improvement is ongoing in the pulp & paper industry to obtain the best possible performance. The improved plant performance translates to the higher quality improvement and lower cost, and simultaneously environmental friendly plant operation.
The GX20 and GX90UT offer an average value computation function making it ideal for controlling temperature and other fluctuating phenomena. The operating status can be controlled in real time, providing operating cost reductions.
Performing control while changing the set point temperature moment by moment is called running a program pattern (or simply running a program). Sterilization and pasteurization require maintaining specific temperatures for specific durations.
The SMARTDAC+ GX is an ideal instrument for program control of a vacuum heat treatment furnace, and recording of subsequent data. A screen is available for monitoring of the program status.
Pressure measurement of tubeless tyres to monitor the air loss is one of the key performance tests in the tyre manufacturing units. Relocation of tyres from one testing rack to the other for various tests and frequent movement of the testing setup for conditional tests to various locations calls for cable free implementation for ease of handling.
AN 04L51B01-01EN
AN 04L51B01-02EN
The SMARTDAC+ recorder monitors wind direction and speed on-site or remotely, and sends instant email notifications if wind speed exceeds a specified threshold. This not only helps ensure safe loading and unloading of cargo at ports, but also prepares for natural disasters.
AN 04L51B01-03EN
- For remote monitoring (of temperature, pressure, and flow volume), installing the SMARTDAC+ GM in the plant and the SMARTDAC+ GX in the office provides for a scalable, pc-free on-site data monitoring solution.
- You can centralize management of large quantities of data by automatically transferring acquired data to a FTP server.
- Universal inputs provide support for thermocouple, RTD, voltage, and a variety of other input signals.
- Lineup of models for up to 450 inputs.
Allows multipoint monitoring and recording on a single unit. - Easily enables network-based data management.
file transfers, Web monitoring, and alarm e-mail
Multi-touch technologies have rapidly moved from the commercial to the industrial sector where they are being used to enhance data analysis.
下載
產品型錄
- SMARTDAC+ Data Acquisition & Control Paperless Recorder GX/GP (9.8 MB)
- SMARTDAC+, the best-selling paperless recorder (data logger), now supports PROFINET! (1.3 MB)
- SMARTDAC+ series Easy connection to PROFINET devices (787 KB)
- SMARTDAC+ Advanced Security Function Data Integrity Support for pharmaceutical & medical standards (2.0 MB)
- Temperature Sensing Solutions (596 KB)
- AI Product Solution Book Download
- SMART 920, 920 MHz band wireless communication instrument series (For US market only) (6.3 MB)
- SMART 920, 920 MHz band wireless communication instrument series (For the Republic of Korea) (7.1 MB)
操作手冊
- Precaution on the use of SMARTDAC+ (615 KB)
- Model GX10/GX20/GP10/GP20 Paperless Recorder First Step Guide (14.1 MB)
- Model GX10/GX20/GP10/GP20 Paperless Recorder User’s Manual (14.7 MB)
- Model GX10/GX20/GP10/GP20/GM10 Communication Command User's Manual (4.4 MB)
- Model GX10/GX20/GP10/GP20/GM10/GX90NW PROFINET Communication User's Manual (4.5 MB)
- Cloud Equipment/Quality Predictive Detection Tool User’s Manual (166 KB)
- Handling of the SD Memory Card (321 KB)
- SMARTDAC+ STANDARD Hardware Configurator User's Manual (4.4 MB)
- SMARTDAC+ STANDARD Universal Viewer User's Manual (4.1 MB)
- DXA170 DAQStudio User's Manual (4.8 MB)
- Regarding the Downloading and Installing for the Software, Manuals and Labels/About the Usage of Open Source Software (367 KB)
- Model GX10/GX20/GP10/GP20 Advanced Security Function (/AS) User’s Manual (4.7 MB)
- Model 773230 Downloading the Validation Documents (132 KB)
- GX20/GP20 (/CM2 and /CM3 options), GM10 (/CM2, /CS2, /CM3 and /CS3 options) 920MHz wireless communication First Step Guide_US,KR (1.3 MB)
- Model GX10/GX20/GP10/GP20/GM10 Multi-batch Function (/BT) User’s Manual (3.5 MB)
- Model GX10/GX20/GP10/GP20/GM10 EtherNet/IP Communication (/E1) User’s Manual (1.8 MB)
- Model GX10/GX20/GP10/GP20/GM10 WT Communication (/E2) User’s Manual (1.5 MB)
- Model GX10/GX20/GP10/GP20/GM10 OPC-UA Server (/E3) User’s Manual (884 KB)
- Model GX10/GX20/GP10/GP20/GM10 SLMP Communication (/E4) User's Manual (2.1 MB)
- Model GX10/GX20/GP10/GP20/GM10 Log Scale (/LG) User’s Manual (1011 KB)
- Model GX10/GX20/GP10/GP20/GM10 Loop Control Function, Program Control Function (/PG Option) User’s Manual (23.6 MB)
- Notes on using the Model GX90EX expansion module (I/O expansion module) (194 KB)
- Model GX20/GP20/GM10, UT52A/UT32A, UPM100 920 MHz Wireless Communication, MH920 Console International (For the US and the Korea) (11.6 MB)
產品規格
- GX10/GX20 Paperless Recorder (Panel mount type) (3.9 MB)
- GX60 I/O Base Unit (Expandable I/O), GX90EX Expansion Module (3.1 MB)
- GX90XA/GX90XD/GX90YD/GX90WD/GX90XP/GX90YA I/O Modules (4.6 MB)
- GX90UT PID Control Module, GX10/GX20/GP10/GP20, GM, Loop Control Function, Program Control function (/PG) (1.8 MB)
- Equipment/Quality Predictive Detection Tool (340 KB)
- Model 773230 Validation Document for SMARTDAC+ (for the /AS option) (335 KB)
- 415940, 415941 and 415942 Shunt Resistor for Screw Input Terminal (178 KB)
- 438920, 438921 and 438922 Shunt Resistor for Clamp Input Terminal (252 KB)
- List of the US Toxic Substances Control Act (TSCA) Compliant Recorder and Controller Products (175 KB)
- List of RoHS (2011/65/EU) Directive Compliant Products (6-substances RoHS compliant products) (356 KB)
- GX20/GP20 (/CM2 option) GM (/CM2 and /CS2 options) 920MHz Wireless Communication (2.3 MB)
- New Legislative Framework (NLF) Conforming Products (362 KB)
軟體下載
- Hardware Configurator *Log-in Required
- Universal Viewer *Log-in Required
- GA10 Data Logging Software *Log-in Required
- GA10 Data Logging Software [60-day free trial] *Log-in Required
- DAQStudio (DXA170) Revision Upgrade *Log-in Required
- Offline version: Equipment/Quality Predictive Detection tool OE10 *Log-in Required
- Validation Document for SMARTDAC+ *Log-in Required
- EtherNet/IP Profile (EDS file) for GX/GP *Log-in Required
- PLC Communication Protocol Profile (EDS file) for GX/GP (For connecting OMRON's PLCs) *Log-in Required
- SMARTDAC+ Report Template Builder *Log-in Required
- SMARTDAC+ Excel Report Simulator *Log-in Required
- SMARTDAC+ SettingFileConverter Settings File Conversion Tool *Log-in Required
- Tag Plate *Log-in Required
- Mobile WEB Application for GX/GP/GM *Log-in Required
- SD Card Formatter *Log-in Required
- LabVIEW Driver (for SMARTDAC+ Series) *Log-in Required
- GX/GP Firmware *Log-in Required
- SMARTDAC+ I/O Module Firmware *Log-in Required
- SMARTDAC+ I/O Expansion Module Firmware *Log-in Required
- SMARTDAC+ PID Control Module Fiemware *Log-in Required
技術訊息
- Effectively Using SMARTDAC+; Software Introduction (6.1 MB)
- Applying Yokogawa Recorders and Controllers to Heat Treatment Applications in the Aerospace and the Automotive Industry (/AH Option) (389 KB)
- SMARTDAC+ Advanced Security Functions White Paper for FDA 21 CFR Part 11 (587 KB)
- Reduce Risk by Eliminating Paper Chart Records (1.6 MB)
- GX/GP Custom Display Setup Guide (642 KB)
- Recorders, Data Loggers, and Control Products Security Standard (488 KB)
- DARWIN Replacement Guide (9.1 MB)
- High-speed Measurement Application High-speed Measurement/ Dual Interval Measurement Feature LR Replacement (8.9 MB)
- SMARTDAC+ Loop Control Function, Program Control Function (/PG Option) (9.5 MB)
- SMARTDAC+ CX Replacement Guide (Model and Suffix Code Replacement) (2.2 MB)
產品外型圖
- Paperless Recorder GX10 (828 KB)
- Paperless Recorder GX20 (976 KB)
- Expandable I/O GX60 (575 KB)
- Expansion Module GX90EX (207 KB)
- PID Control Module GX90UT (219 KB)
- Digital Input/Output Module GX90WD (229 KB)
- Analog Input Module GX90XA (531 KB)
- Digital Input Module GX90XD (378 KB)
- Pulse Input Module GX90XP (329 KB)
- Analog Output Module GX90YA (265 KB)
- Digital Output Module GX90YD (267 KB)
影片
Smart user interface, smart architecture, and smart functionality is achieved in the new Yokogawa SMARTDAC+ data acquisition and control product series. The Yokogawa SMARTDAC+ GX and GP are fully integrated measurement, display, and recording platforms equipped with an advanced touch screen operator interface. GX series is a panel-mount design, capable of operating in harsh industrial applications and environments. GP is the portable version of the GX, intended for use in lab and test bench applications.
This short video introduces SMARTDAC+ GX20 Data Acquisition Station and demonstrates how quickly we can set the unit up to do measurement and data recording.
This short video shows the method of adding input/output modules to the Yokogawa SMARTDAC+ Data Acquisition recording system and how to confirm correct installation.
This short video shows the method of configuring alarms on the SMARTDAC+ paperless recorder. In this example setting a high alarm on channel 1 at 25 Deg C.
This short video shows the method of configuring group settings in SMARTDAC+ paperless recorder.
This short video shows the method of loading a configuration file stored on an SD card into a SMARTDAC+ paperless recorder.
This short video shows the method of configuring tag numbers in the SMARTDAC+ paperless recorder.
This video shows the capability of viewing information from the 21 CFR Part 11 compliant SMARTDAC+ paparless recorder range on an iOS or Android device
新聞
-
新聞 2018年7月5日 橫河電機開發高壓模擬輸入模組，加入OpreX數據採集產品陣容
-
新聞 2022年4月19日 SMARTDAC+無紙記錄器和資料收集器專用品質檢測工具
-不是 AI 專家也可以為工廠建構自己的設備和品質異常檢測系統-
想了解更多技術&解決方案嗎？
聯絡我們