Taiwan TW   
TC10
控制器

TC10溫度控制器

TC10是一款單回路溫度控制器，採用易讀的3色LED顯示屏。控制器的安裝深度較短，有助於節省空間。TC10支持使用代碼輕鬆配定，可以快速啟動。

主要特點

  • 身形小巧：48×48 mm (1/16 DIN)，深度為48 mm＋14 mm (端子)
  • 動態3彩色LED顯示屏
  • 通用輸入：(TC、mV、V、mA、Pt100-Pt1000)
  • 4個設定點和報警功能
  • 串行通信：RS-485 Modbus
  • PID控制、ON/OFF、自整定
  • IP65前面板(安裝可選面板墊片時)(可選)

Details

  • UT130

    Compact 1/16 DIN sized easy-to-see Temperature Controller that comes with large (17.5 mm height) 3-digit display. Universal input, "SUPER" overshoot suppress function and dynamic auto tune are standard. Heating/cooling control and RS485 communication are optional features.

    更多

  • UT35A/UT32A

    UT35A和UT32A溫度控制器採用易讀的14段大型彩色LCD顯示屏，並配以導航鍵，從而極大地提升了監視和操作性能。標配梯形圖順控功能。控制器安裝深度較短，有助於節省儀表面板的空間。UT35A/UT32A還支持以太網通信等開放網絡。

    更多

  • UT32A-D

    UT32A-D是一款緊湊型數字指示控制器，帶可選的2回路控制，還包括梯形圖順控功能。

    更多

  • 中級UT55A/UT52A

    UT55A和UT52A溫度控制器採用易讀的14段大型彩色LCD顯示屏，並配以導航鍵，從而極大地提升了監視和操作性能。標配梯形圖順控功能。控制器安裝深度較短，有助於節省儀表面板的空間。UT55A/UT52A還支持以太網通信等開放網絡。

    更多

  • UT75A應用

    UT75A溫度控制器採用易讀的14段大型彩色LCD顯示屏，並配以導航鍵，從而極大地提升了監視和操作性能。標配梯形圖順控功能。控制器安裝深度較短，有助於節省儀表面板的空間。UT75A還支持以太網通信等開放網絡。

    更多

參考

應用
Temperature Control for Seal-heating Parts in Wrapping Machinery
Thumbnail
摘要:

The TC series of temperature controllers is perfect for controlling the heating temperature of sealing parts and the temperature of sealing rolls (pre-heating) in a variety of different wrapping machinery.

產業別:
常見問題
I want to use it as a display. Can I hide the SP display?
(ns-faq-ut-2202-spec)
Thumbnail
常見問題
With thermocouple K input, can I display digits after the decimal point for the temperature?
(ns-faq-ut-2206-setting)
Thumbnail
常見問題
How many analog outputs are there?
(ns-faq-ut-2204-spec)
Thumbnail
常見問題
Can I use the DI function to switch between auto/manual and between run stop/start?
(ns-faq-ut-2205-spec)
Thumbnail
常見問題
Is there a controller to which I can connect a 2-wire Pt1000 Ω sensor?
(ns-faq-ut-2217-select)
Thumbnail
常見問題
When installing the TC10, what is the depth in millimeters from the surface of the panel?
(ns-faq-ut-2220-spec)
Thumbnail
常見問題
Does the TC10 support a 2-wire Pt1000 Ω?
(ns-faq-ut-2221-spec)
Thumbnail
常見問題
Can I initialize parameters on the TC10?
(ns-faq-ut-2225-setting)
Thumbnail
常見問題
Can I turn off the "°C" display with input other than temperature on TC10?
(ns-faq-ut-2226-spec)
Thumbnail
常見問題
What settings should I use to output PV transmission from ananalog output terminal on TC10?
(ns-faq-ut-2227-setting)
Thumbnail
常見問題
When using an external power supply with 2-wire wiring of TC10, what is the input resistance when inputting 4-20 mA?
(ns-faq-ut-2228-spec)
Thumbnail
常見問題
On the TC10, what does it mean if AL and 1 are lit?
(ns-faq-ut-2235-spec)
Thumbnail
常見問題
I want to use the detailed parameter setting method of TC10, but what number is the password?
(ns-faq-ut-2234-setting)
Thumbnail
常見問題
On the TC10, I want the difference lower limit alarm to be ON 5°C below the setpoint value. Do I need a minus sign ( - ) on the alarm setting value?
(ns-faq-ut-2236-setting)
Thumbnail
常見問題
I'm sending the temperature via PV transmission on TC10. Can I output in the 100% direction (20 mA or more) upon burnout?
(ns-faq-ut-2237-setting)
Thumbnail
常見問題
I selected SP value transmission on TC10, but no SP value is displayed.
(ns-faq-ut-2238-setting)
Thumbnail
常見問題
What is the I/O response time of the TC10?
(ns-faq-ut-2251-spec)
Thumbnail
常見問題
There's no SG terminal for wiring RS485 communication on the TC1. If the other instruments have an SG terminal, how should I wire it?
(ns-faq-ut-2252-connect)
Thumbnail
常見問題
What is the TC10’s warranty period?
(ns-faq-ut-2253-other)
Thumbnail
常見問題
Are the TC10’s wiring terminals screw terminals?
(ns-faq-ut-2254-spec)
Thumbnail
常見問題
What is the measured current of the TC10's RTD input?
(ns-faq-ut-2255-spec)
Thumbnail
常見問題
I'm looking for a replacement for the UD310. Can it output the SP setting value?
(ns-faq-ut-2203-spec)
Thumbnail

下載

操作手冊
產品規格
技術訊息
認證證明

想了解更多技術&解決方案嗎？

聯絡我們
置頂