Name: UTAdvanced UP55A
Brand: Yokogawa
SKU: up55a

UP55A是一款新發布的1/4 DIN尺寸程序控制器，可以提供多達30種程序模式，並且可以同時監測8個PV事件、16個時間事件和8個報警。同時，標配還包括梯形圖順控功能。

概述

UP55A是一款新發布的1/4 DIN尺寸程序控制器，可以提供多達30種程序模式，並且可以同時監測8個PV事件、16個時間事件和8個報警。

先進控制

5個內定控制功能和算法
梯形圖順序控制
模糊邏輯控制

簡易性

易讀的14段大型彩色LCD顯示屏
參數的文本滾動功能
導航提示和導航鍵
編程功能鍵
用戶可設定的默認值
支持多語言(英語、西班牙語、法語、德語)
65 mm深的緊湊設計

網絡

以太網(Modbus/TCP)
RS-485 (Modbus/RTU、儀表間通信、協調運轉、PC-Link)
開放網絡(PROFIBUS-DP、CC-Link、DeviceNet)

可靠性

3年保修^*1
RoHS/WEEE
NEMA4^*2/IP56前面板

應用軟件

帶梯形圖構建功能的LL50A 參數設定軟件(單獨銷售)

*1: 3年保修期為出廠後36個月。
*2: 只經製軟管測試。

【Support Information】List of RoHS

This is a list of recorder and controller products that support the RoHS (2011/65/EU) directive.

更多
【Support Information】UTAdvanced Series Parameter Maps and Lists

UTAdvanced series Parameter map list for each model can be downloaded.
Please use it to manage and save the set parameters. Also please use it as a reference for the key operation at that time.

更多
【Support Information】New Legislative Framework (NLF) Conforming Products

This is a list of recorder and controller products that support the New Legislative Framework (NLF.)

更多

參考資料

Control of Heat Treating Furnace Operation

應用

Controlling a pharmaceutical sterilizer/pasteurizer

常見問題

The UP55A program controller comes standard with 8 contact input (DI) terminals, but I only know 3 of the terminal numbers.What are the other 5 terminal numbers?

(ns-faq-ut-2071-connect)

常見問題

At the end of UP32A/UP35A/UP55A programs, does the PIDNo. change when local is set (JC=LOCAL)?

(ns-faq-ut-2079-spec)

常見問題

How do I set up output of alarm output 1 from the UP32A/UP35A/UP55A AL1 terminals (relay contact output)?

(ns-faq-ut-2082-setting)

常見問題

I want to check the program controller patterns from the main unit.

(ns-faq-ut-2122-setting)

常見問題

With a program controller, if you don't turn ON the wait function on/off 1–5 setting (parameter WT.SW1–WT.SW5), does the wait function not operate?

(ns-faq-ut-2127-spec)

常見問題

With program controllers, can you do auto-tuning while programs are running?

(ns-faq-ut-2128-setting)

常見問題

With program controllers, can you change the SP while programs are running?

(ns-faq-ut-2133-setting)

常見問題

On a program controller, can I do contact output when an operation parameter ends?

(ns-faq-ut-2134-setting)

常見問題

While a program is running, I want to judge advancing to the next segment with an operator. How can I do that?

(ns-faq-ut-2142-setting)

常見問題

I use the UP under batch control. I want to display a message on the front panel of the UP after batch control stops.

(ns-faq-ut-2169-setting)

常見問題

How can I delete a segment from a UP program pattern through CC-Link communication?

(ns-faq-ut-2189-setting)

常見問題

I want to write program patterns to the UP Program Controller via communications, but can I do that while the UP is running a program?

(ns-faq-ut-2201-connect)

常見問題

Can I use DO to transmit the pattern number currently used on the UP to an external device?

(ns-faq-ut-2216-setting)

常見問題

Is remote input required on the cascade primary controller when performing cascade control with two controllers?

(ns-faq-ut-2118-setting)

常見問題

When switching input with 2-input switching control, doesn't the control output suddenly change (bump)?

(ns-faq-ut-2057-spec)

常見問題

I want to use 2 communication systems.

(ns-faq-ut-2085-select)

常見問題

With the UT55A, UT75A, and UP55A, is there a difference between selecting RS485 communication with the 2nd digit of thesuffix code versus the 3rd digit?

(ns-faq-ut-2086-select)

常見問題

I'm doing cascade control. How do I do auto-tuning?

(ns-faq-ut-2103-setting)

常見問題

Are there controllers that can output 2 alarm relay contacts with the c contact?

(ns-faq-ut-2106-select)

常見問題

With loop control with PV switching or PV auto-selector, can I apply independent correction on each individual input?

(ns-faq-ut-2172-setting)

常見問題

With loop control with PV switching or PV auto-selector, can I set alarms individually for analog values acquired on each input?

(ns-faq-ut-2173-setting)

常見問題

Can I use a low cut on the PV (measured value input)?

(ns-faq-ut-2186-spec)

常見問題

I want to display he volume of a spherical tank, but is there a function that can do that?

(ns-faq-ut-2192-spec)

常見問題

I want to perform cascade control of 2 temperature inputs on a single unit. Is there a model that can do that?

(ns-faq-ut-2193-select)

常見問題

Is there a model that can have 2 ports of RS485 communication?

(ns-faq-ut-2223-select)

常見問題

What happens to the alarm setting values when you switch from local SP to remote SP?

(ns-faq-ut-2126-spec)

常見問題

Can I toggle between remote and local by pressing a key?

(ns-faq-ut-2131-setting)

常見問題

I want to convert my old controller (GREEN series) parameter data for the UTAdvanced series. Is there a program for that?

(ns-faq-ut-2222-soft)

常見問題

I used the parameter conversion tool to convert GREEN series data for the UTA series. I can’t add the CC-Link communication option code to the converted data.

(ns-faq-ut-2230-spec)

常見問題

Can I set control for power fail recovery to MAN?

(ns-faq-ut-2117-setting)

常見問題

I want to wire a 2-wire transmitter and a 24 VDC sensor power supply.

(ns-faq-ut-2119-connect)

常見問題

Can you tell me the procedure for assignment when the heater break alarm output option (suffix code /HA) is installed?

(ns-faq-ut-2015-setting)

常見問題

Can I set up 4 alarm relay outputs?

(ns-faq-ut-2016-setting)

常見問題

With the types that have an Ethernet communication function, even if I set the Ethernet setting switch to "1," it reverts to "0."

(ns-faq-ut-2022-connect)

常見問題

After changing the UT's SP values from the MELSEC via CC-Link, when I change the SP value on the UT main unit, I can't change to the same value as before from the MELSEC.

(ns-faq-ut-2026-connect)

常見問題

With CC-Link, I write 1 to RY48 and change to MAN, and then change to AUTO using the main unit A/M key. Can you tell me how to change back to MAN again via CC-Link?

(ns-faq-ut-2027-connect)

常見問題

What profile number is used when using CC-Link on only 1 unit?

(ns-faq-ut-2028-connect)

常見問題

Can I switch between RUN and STOP via CC-Link?

(ns-faq-ut-2029-connect)

常見問題

To use valve opening in a position proportional type UT ladder program, which register should I reference?

(ns-faq-ut-2040-program)

常見問題

Can I output an alarm (close the alarm terminal) on a power failure?

(ns-faq-ut-2056-setting)

常見問題

Is calibration of position still required if the position proportional type feedback input is current?

(ns-faq-ut-2059-spec)

常見問題

Can I change the temperature controller profile information for CC-Link communication?

(ns-faq-ut-2068-spec)

常見問題

What is the Modbus master function that is added when CC-Link communication is installed?

(ns-faq-ut-2069-spec)

常見問題

What happens to transmission output when an input OVER occurs at 4–20 mA input (PV: 4–20 mA)?

(ns-faq-ut-2081-setting)

常見問題

I connect multiple UTs as CC-Link slaves. How should I assign PLC CPU registers?

(ns-faq-ut-2092-connect)

常見問題

Is there a C contact with alarm contact output?

(ns-faq-ut-2112-spec)

常見問題

Can you describe the register symbols in the profiles for open network communication?

(ns-faq-ut-2115-term)

常見問題

Can a UT100 series instrument be connected downstream of a UTAdvanced series with CC-Link communications?

(ns-faq-ut-2125-spec)

常見問題

Can I connect transmission output (current output) to a voltage input meter?

(ns-faq-ut-2135-setting)

常見問題

I'm writing PID settings via CC-Link communication, but when I send 100 to proportional band P, 10.0 appears on the main unit.

(ns-faq-ut-2138-setting)

常見問題

b.out was displayed on the controller's PV display. What does that mean?

(ns-faq-ut-2148-spec)

常見問題

Can I read a valve opening value via communication on a position proportional controller?

(ns-faq-ut-2159-spec)

常見問題

Which station type should I select for the UTAdvanced series for CC-Link communication: Remote I/O, Remote Device, or Intelligent Device?

(ns-faq-ut-2164-setting)

常見問題

I purchased a unit with CC-Link communication. I'm setting up the parameters for CC-Link, and there are 2 communication speed settings, BR and BPS. Which setting should I use?

(ns-faq-ut-2166-setting)

常見問題

Sometimes data can't be written to the "1.SP" register via CC-Link communication. What causes this?

(ns-faq-ut-2178-spec)

常見問題

Sometimes with CC-Link communication it stops writing data. What should I do?

(ns-faq-ut-2180-spec)

常見問題

What happens if I write data outside the specified range via CC-Link communication?

(ns-faq-ut-2181-spec)

常見問題

Is there support for the "CC-Link IE" standard?

(ns-faq-ut-2182-spec)

常見問題

I want to perform autotuning via communication on a UT with CC-Link communication. Should I turn AT_L1 which is assigned to the OUT area in the profile to ON (=write 1)?

(ns-faq-ut-2175-program)

常見問題

Downstream from a UT with CC-Link communication (the Modbus master), the power to a controller connected via RS485 communication (the Modbus slave) went out. After the power to the controller was restored, communication did not restart. What should I do?

(ns-faq-ut-2179-spec)

常見問題

Is the SP slope valid for remote SP values as well?

(ns-faq-ut-2210-spec)

常見問題

I have the /LP option and I’m wiring a 2 wire transmitter power supply. How can I input a simulated current signal?

(ns-faq-ut-2239-connect)

常見問題

What is the model of the current transformer for heater current measurement used by UTAdvanced?

(ns-faq-ut-2248-spec)

常見問題

How can I display the currently used PID no. on the operation screen?

(ns-faq-ut-2249-setting)

常見問題

Even when I turn ON the power, nothing appears on the UT display.

(ns-faq-ut-2013-setting)

常見問題

I can't find a parameter I want to set.

(ns-faq-ut-2001-setting)

常見問題

I set up a difference lower limit alarm, but no alarm is output.

(ns-faq-ut-2017-setting)

常見問題

With the UTAdvanced ladder program function, can I use constants and other parameters in basic math functions?

(ns-faq-ut-2024-connect)

常見問題

Are communications with the FA-M3 possible?

(ns-faq-ut-2021-connect)

常見問題

Can I use an RS-485 communication program written for the GREEN series (UT300/UT400/UT500/UP300/UP500/UM300) on a UT-Advanced series instrument?

(ns-faq-ut-2025-connect)

常見問題

When using the LL50A to create ladder programs, which ladder program edit mode should I use: "input ladder calculation," "output ladder calculation," or "user ladder"?

(ns-faq-ut-2030-program)

常見問題

I'm creating ladder programs on the LL50A. I want to set input computed results to R.SP, but I see lots of digits are displayed after the decimal point of the data on the ladder monitor. Can I reduce the number of digits displayed after the decimal point?

(ns-faq-ut-2031-program)

常見問題

Can I use analog input in computations?

(ns-faq-ut-2032-program)

常見問題

Can I rewrite constants used in ladder programs via communication?

(ns-faq-ut-2033-program)

常見問題

Can I disable ladder programs that I used?

(ns-faq-ut-2034-setting)

常見問題

Can I detect when the power is turned ON?

(ns-faq-ut-2035-program)

常見問題

My LL50A ladder program monitor does not start.

(ns-faq-ut-2036-program)

常見問題

A ladder program that I wrote doesn't work properly.

(ns-faq-ut-2037-program)

常見問題

My ladder program's comparison commands don't work properly.

(ns-faq-ut-2038-program)

常見問題

When using contact input in ladder programs, is it necessary to turn OFF the contact function assigned to the setup parameters?

(ns-faq-ut-2039-program)

常見問題

Can you tell me how to wire and set up waste liquid pH control?

(ns-faq-ut-2041-setting)

常見問題

I'm controlling the temperature of an electric furnace using a thyristor. How should I wire and configure this?

(ns-faq-ut-2042-setting)

常見問題

I'm controlling the temperature of an electric furnace using solid state relays. How should I wire and configure this?

(ns-faq-ut-2043-setting)

常見問題

Can you tell me how to wire and set up flow control using an inverter?

(ns-faq-ut-2044-setting)

常見問題

I'm controlling tank level ON/OFF. How should I wire and configure this?

(ns-faq-ut-2045-setting)

常見問題

I'm doing proportional control of tank level. How should I wire and configure this?

(ns-faq-ut-2046-setting)

常見問題

I'm controlling tank pressure. How should I wire and configure this?

(ns-faq-ut-2047-setting)

常見問題

With the LL50A and UTAdvanced, can I perform RS-485 communications without a dedicated cable?

(ns-faq-ut-2051-connect)

常見問題

How can I display parameters that aren't displayed in the LL50A parameter setting software?

(ns-faq-ut-2052-soft)

常見問題

Can I acquire trend data on the LL50A?

(ns-faq-ut-2053-soft)

常見問題

Can I switch scaling using contact input?

(ns-faq-ut-2054-program)

常見問題

What is the resolution of control output (4–20 mADC)?

(ns-faq-ut-2055-spec)

常見問題

I'm controlling tank temperature. How should I wire and configure this?

(ns-faq-ut-2048-setting)

常見問題

I'm controlling furnace temperature with a motorized valve. How should I wire and configure this?

(ns-faq-ut-2049-setting)

常見問題

I'm controlling temperature with a heat exchanger. How should I wire and configure this?

(ns-faq-ut-2050-setting)

常見問題

Are all COM terminals for contact input connected internally?

(ns-faq-ut-2061-spec)

常見問題

Can I reverse the 4–20 mA control output and change to a 20–4 mA signal?

(ns-faq-ut-2063-spec)

常見問題

How can I enter initial settings?

(ns-faq-ut-2064-setting)

常見問題

OVER was displayed on the PV (measured value) display. How will the control output operate in this case?

(ns-faq-ut-2070-spec)

常見問題

I initialized the controller, but no control output value is output.

(ns-faq-ut-2074-setting)

常見問題

B.OUT was displayed on the PV (measured value) display. What could be the cause of this?

(ns-faq-ut-2077-connect)

常見問題

There are differences between PV display values and the displays of other measuring instruments. Can I correct these?

(ns-faq-ut-2078-spec)

常見問題

An error occurs with position-proportional type automatic valve position adjustment (V.AT).

(ns-faq-ut-2083-setting)

常見問題

Is a terminal cover included?

(ns-faq-ut-2088-select)

常見問題

Can I set the PV display to -100 with 20 mA input, and to 0 with 4 mA input?

(ns-faq-ut-2089-setting)

常見問題

Can I switch the temperature units between°C and °F?

(ns-faq-ut-2087-spec)

常見問題

I'm doing temperature control. I did PID tuning, but the overshoots are still large and I want to suppress them. Is there a good way to do this?

(ns-faq-ut-2104-setting)

常見問題

I'm replacing my GREEN series with the UTAdvanced series. Is there anything I need to be careful of in terms of wiring?

(ns-faq-ut-2108-connect)

常見問題

Does the alarm function work when operation is stopped (STOP)?

(ns-faq-ut-2110-spec)

常見問題

What is the alarm standby function?

(ns-faq-ut-2111-spec)

常見問題

Are the control and alarm hysteresis values set as percentages?

(ns-faq-ut-2113-setting)

常見問題

I'm using the UP35A and UP55A. Are PV and local event hysteresis values set with percentages?

(ns-faq-ut-2114-setting)

常見問題

How can I check the RS485 communication status?

(ns-faq-ut-2116-connect)

常見問題

I want to set the PID, output limiter, and hysteresis for each SP number.

(ns-faq-ut-2120-setting)

常見問題

What is the minimum hold time that contact input can detect?

(ns-faq-ut-2121-spec)

常見問題

Why are PID parameters set with relay output?

(ns-faq-ut-2123-spec)

常見問題

Does the UTAdvanced series support CCC and GB standards? Can it be used in China?

(ns-faq-ut-2124-spec)

常見問題

Can the alarm operation be disabled during operation stop (STOP) or manual operation (MAN)?

(ns-faq-ut-2129-setting)

常見問題

I want to stop the lamp indicator or action for unused alarms.

(ns-faq-ut-2136-setting)

常見問題

Can I assign heater disconnection alarm 1 to alarm 1 output (terminal no. 108-109)?

(ns-faq-ut-2137-setting)

常見問題

Is there a limit on the number of times you can write to the D register via communication?

(ns-faq-ut-2140-spec)

常見問題

What should I do if DI input is not accepted on relay contacts?

(ns-faq-ut-2141-spec)

常見問題

Can I remove the output limit value restriction during manual operation?

(ns-faq-ut-2143-setting)

常見問題

I'm controlling temperature by using voltage pulse output to operate a heater with an SSR, but I can't stop the hunting. I already performed auto-tuning.

(ns-faq-ut-2146-setting)

常見問題

Valve calibration parameters don't appear on position proportional controllers.

(ns-faq-ut-2147-setting)

常見問題

I'm controlling pressure. Are there PID reference values?

(ns-faq-ut-2153-setting)

常見問題

I'm controlling flow. Are there PID reference values?

(ns-faq-ut-2154-setting)

常見問題

I'm controlling flue levels. Are there PID reference values?

(ns-faq-ut-2155-setting)

常見問題

With 1-5 VDC input, can I make the PV display 0.00 to -10.00 kPa?

(ns-faq-ut-2156-setting)

常見問題

I want to create a ladder program that writes output tracking values via communication.

(ns-faq-ut-2158-setting)

常見問題

I'm using a thermocouple for the input, but "b.out" appears on the PV display. What should I check first?

(ns-faq-ut-2160-other)

常見問題

Can you tell me the inrush current value of the UTA series of instrument power?

(ns-faq-ut-2162-spec)

常見問題

Can you tell me how to get the measurement accuracy when measuring 0 to 1000°C with a type K thermocouple? I selected input type K2 (-270.0 to 1000.0).

(ns-faq-ut-2163-spec)

常見問題

What is the measured current during RTD input?

(ns-faq-ut-2167-spec)

常見問題

I'm pressing SET/ENTER on the front panel keys but I can't change the SP value.

(ns-faq-ut-2171-setting)

常見問題

I set the UTA output to 10-segment linearizer approximation. Can the resulting output values be read via communication?

(ns-faq-ut-2177-spec)

常見問題

Can I make it display the alarm type when an alarm occurs?

(ns-faq-ut-2184-spec)

常見問題

What is the MR (manual reset) function?

(ns-faq-ut-2185-spec)

常見問題

How to connect one UT with CC-Link communication to another downstream UT via RS485. The RS485 communication terminal of the UT with CC-Link communication is a 2-wire system, and that of the other UT is a 4-wire system.

(ns-faq-ut-2187-connect)

常見問題

I want to control the temperature of 3 zones. How should I configure it?

(ns-faq-ut-2191-select)

常見問題

I purchased a general type of controller. Can this control cooling?

(ns-faq-ut-2194-other)

常見問題

I want to check the suffix code but I can't see the name plate. Is there another way to check it?

(ns-faq-ut-2195-setting)

常見問題

After converting the controller manual output value to a number like the SP, can I finalize it with the ENT key?

(ns-faq-ut-2196-setting)

常見問題

I'm using the Pt100 sensor. The PV input type IN parameters include PT1, PT2, and PT3, but which should I select?

(ns-faq-ut-2197-setting)

常見問題

Can I apply a 24 VDC voltage to a contact input?

(ns-faq-ut-2198-spec)

常見問題

I want to output the results of calculations by ladder programs with 4-20 mA on the OUT output terminal, but nothing happens.

(ns-faq-ut-2207-program)

常見問題

I want to output the results of calculations by ladder programs with 4-20 mA on the RET output terminal, but nothing happens.

(ns-faq-ut-2208-program)

常見問題

I want to output the results of calculations by ladder programs with 4-20 mA on the OUT2 output terminal, but nothing happens.

(ns-faq-ut-2209-program)

常見問題

I want to contol pressure and temperature with a single pattern using the UP and UT.

(ns-faq-ut-2213-spec)

常見問題

When installing the UTAdvanced series, what is the depth in millimeters from the surface of the panel?

(ns-faq-ut-2214-spec)

常見問題

Can I switch heating and cooling control?

(ns-faq-ut-2218-spec)

常見問題

Can I connect multiple instruments such as power controllers to a controller's analog current output?

(ns-faq-ut-2219-connect)

常見問題

Do you sell terminal covers?

(ns-faq-ut-2233-other)

常見問題

Can I set it for 1 shot-only event display and contact output ON when an alarm activates?

(ns-faq-ut-2241-setting)

常見問題

Is it possible to connect multiple contact inputs to a single relay contact?

(ns-faq-ut-2243-connect)

常見問題

Can I choose the color of the UTAdvanced terminal cover?

(ns-faq-ut-2246-spec)

常見問題

Is the current transformer for heater current measurement that is used by UTAdvanced made by Yokogawa Electric?

(ns-faq-ut-2247-other)

常見問題

Can you tell me where to download catalogs, specifications, user manuals, technical information, drawings, software, and CAD data?

(ns-faq-gxgp-097-other)

產品型錄

UTAdvanced數字指示調節器 (5.6 MB)
Digital Indicating Controller UTAdvanced for Customization (2.1 MB)

操作手冊

產品規格

New Legislative Framework (NLF) Conforming Products (362 KB)
UP55A Program Controller (1.1 MB)
List of RoHS (2011/65/EU) Directive Compliant Products (6-substances RoHS compliant products) (356 KB)

軟體下載

技術訊息

UTAdvanced UP55A Program Controller Parameter Maps and Lists (763 KB)
GREEN to UTAdvanced Conversion Tool Operation Guide (2.0 MB)
Preventive Maintenance of UTAdvanced series (48 KB)

產品外型圖

Model UP55A Program Controller (307 KB)
Model UP55A Program Controller (UP55A-NNN-xx-xx/x) (321 KB)
UTAdvanced Model: UTAP001 Terminal Cover for 96 x 96 mm (167 KB)

想了解更多技術&解決方案嗎？

聯絡我們

UTAdvanced UP55A

Overview

概述

先進控制

簡易性

網絡

可靠性

應用軟件

Details

【Support Information】List of RoHS

【Support Information】UTAdvanced Series Parameter Maps and Lists

【Support Information】New Legislative Framework (NLF) Conforming Products

參考

下載

產品型錄

操作手冊

產品規格

軟體下載

技術訊息

產品外型圖