[GA10] Is there a limit to the monitor interval (sampling interval), when using the anomaly detection function?

When using anomaly detection, set 10 seconds or more for the monitor interval. If you set less than 10 seconds, anomaly detection is not run.
User’s Manual IM 04L65B01-01EN

相關產品&解決方案

  • 資料記錄軟體GA10

    GA10專為橫河電機記錄器,資料收集器,溫度控制器和功率監視器設計,擁有最大相容性,可透過Modbus通信收集資料。

    更多

置頂