You need to make sure that the new sensor has an ID chip (-VS models). The sensors will have been calibrated in the factory calibration and this data is stored on the ID chip in the sensor. If this calibration is correct for your process, then you don't need to do a calibration.
相關產品&解決方案
-
數位 SMART SENCOM™ 轉接器: SA11
可重複使用的 SMART 轉接器,只需在感測器達到其使用壽命時進行處理。橫河電機的SENCOM 4.0平台,可降低營運成本和資源浪費,同時貢獻永續未來的長期業務目標。