The Liquid Sensor Wiring Guide makes finding the correct wiring for Yokogawa supported liquid analytical sensors simple. To use the guide, follow this 3-step process to find your sensor wiring:
- Select your measurement
- Select your sensor
No more wasted time flipping through instruction manuals.
相關產品&解決方案
-
Hot-Tap Holder PR10
On-line measurements often present extra challenges, especially when routine maintenance is required. The PR10 is ideally suitable for applications where the sensors must be removed without interrupting or shutting down the process. Without any special tools the PR10 can be retracted safely from the process at pressures up to 5 bar (72 psi). Using the PR10 allows us to place any dissolved oxygen sensor that has a PG13.5 connenction into a retractable assembly.
-
pH和ORP傳感器
pH電極和傳感器是進行pH值測量的傳感部分，有伸縮式、流通式、浸入式和直插式等多種安裝選項。選擇合適的pH電極/傳感器對優化測量結果至關重要。
-
導電度分析儀
可測量自來水、污水等水質，以及各種製程液體的導電度和電阻率測量。另有衛生型及方便型可供選擇。
-
液體分析計
液體分析計用於水質和化學的製程監測，進行製程最佳化和控制。
-
溶解氧(DO)分析計
溶解氧(DO)分析計用於測量製程液體中溶解或攜帶的氧量。有三種常用的溶解氧測量技術：極譜法、電流法和光學法。標準測量單位是mg/l (氧/水)、ppm單位、ppb單位或飽和百分比。
-
溶解氧傳感器
電極和傳感器是溶解氧（DO）測量的傳感部分。有三種常用的溶解氧測量技術：極譜法、電流法和光學法。以及各種安裝選項，包括浮球、可伸縮、流經、浸入和直接插入。