Several processes in multiple manufacturing lines (Pump, Manifold)
Overview
Our customers' production lines have a wide variety of equipment and a wide range of measurement targets.
It is difficult to add new device to that production equipment. In addition, there are concerns that the number of maintenance workers will be limited due to the curtailment of personnel caused by the COVID-19, which will increase the opportunities to overlook abnormal situations.
To address these issues, Multi-Sensing Remote I/O Analog Sensing Unit VZ20X contributes to reducing the risk of equipment failure by being installed compactly near the object to be measured, and by capturing the status of each equipment quickly through accurate sensing.
Customer benefit
Customer can cover long-distance area and the VZ20X is very compact to install into small space of any equipment.
Automobile engine part manufacturer
Problems
- Measure equipment for diagnosis to avoid unexpected stop
- Customer has so many legacy equipment in each production line
- Not easy to integrate all equipment measurement data in 1 system and not easy to install new measurement system for each equipment
Solution
- Measure multiple equipment over site with multiple VZ20X connected in daisy chain
Features
- Installable in smaller space, and can cover long-distance measurement area by daisy chain with 1 ms – 100 ms sampling interval
Product recommendation
- Multi-Sensing Remote I/O Analog Sensing Unit VZ20X
A sample program for system construction is introduced.
*As of April 2022, the Analog Sensing Unit VZ20X is sold in Asia Pacific and the Middle East areas. - Data Logging Software GA10
60-day free trial is available.
Looking for more information on our people, technology and solutions?
Contact Usilgili Ürünler & Çözümler
-
Analog Sensing Unit VZ20X
VZ20X is a data measuring device that helps achieve “predictive maintenance,” whereby performance degradation and failures in production equipment are prevented before they occur. Providing a solution for optimally timed equipment inspections and replacements, it addresses the issues of reduced uptime and safety caused by failures.
-
Data Logging Software GA10
The latest software that enables you to build a DAQ system without programming. Designed for maximum compatibility with Yokogawa recorders, data loggers, temperature controllers, and power monitors, GA10 can also acquire data via Modbus communications.