FN110 is based on the industrial automation wireless communication standard ISA100.11a of the International Society of Automation (ISA). This product is ISA100 Wireless gateway optimized for a small system. Using this product with "Interface Adapter LN90" makes launching a wireless system easier , reducing start-up time.
Features
Easy to set up :
This product acts as system manager, security manager, gateway, and backbone router based on ISA100.11a. Easy to construct small scale field wireless network with combining Remote Terminal Unit (RTU) or other controller.
Built-in high-performance wireless communication function :
The high-performance built-in wireless communication module has excellent radio sensitivity and low power consumption, provides a stable wireless communication platform with excellent power saving capabilities.
Compact and light weight :
This product has been made compact and extremely lightweight as an explosion proof antenna with a built-in wireless communication module. As a result, flexible installation in the industrial environment is possible.
Details
Standard Specifications
| Wireless Specifications | Communication protocol | ISA100 Wireless (IEEE802.15.4) |
|---|---|---|
| Data rate | 250 kbps | |
| Frequency | 2400 – 2483.5 MHz license free ISM band | |
| Radio security | AES 128 bit | |
| RF Transmitter power | 12 dBm (eirp) | |
| Antenna | 2 dBi (Omni directional) | |
| Power Supply Specifications | Power Supply Voltage | 2.9 - 4.8 V |
| Consumption current | Max. 60 mA | |
| Performance Specifications | Digital Communication for FN series | Communication Method: Half-duplex communication (RS485 compliant) Communication Speed: 9600 bps Communication Distance: Max 20 m (dedicated cable) |
| Installation Environment | Ambient Temperature Limits | Operating: -40 to 85°C (attitude up to 3000 m) |
| Regulatory Compliance Statments | Telecommunication Compliance | MIC Identification (Japan), FCC Approval (United States), IC Approval (Canada), R&TTE Directive (EU Countries) |
| CE Conformity | Radio Spectrum: EN 300 328 EMC: EN 301 489-1, EN 301 489-17, EN61326-1 Class A Table 2, EN55011 Class A Safety: EN61010-1 (Indoor/Outdoor use), EN62479 |
|
| Canadian Safety Standards | CAN/CSA-C22.2 No.61010-1 CAN/CSA-C22.2 No.94.1, CAN/CSA-C22.2 No.94.2 IEC 60529 |
|
| Degrees of Protection | IP66, IP67 and Type 4X apply when the connector is properly tightened. | |
| Explosion Protected Types | IECEx Type n | |
| Physical Specifications | Weight | 100 g |
Performance Specifications
| Modbus communication for PLC/RTU | |
|---|---|
| Field Wireless Subnet | 1 subnet |
| Field Wireless Device | Max. 20 devices (update rate: 2 to 3600 s) Max. 10 devices (update rate: 1 s) |
| Modbus communication for PLC/RTU | Communication Mode: Half-duplex communication (RS485 compliant) Communication Speed: Max. 38400 bps Communication Distance: Max. 20 m (dedicated cable) |
| Diagnostic Functions | Power failures, wired communication failures, firmware internal errors, memory errors, abnormal temperature |
Important Notice
| Date | Remarks |
| 2024/12 | Important Notice for Safe Use of Products |
Resources
Hydro power
Downloads
Brochures
- Field Wireless Product Profile (479 KB)
- Yokogawa Field Wireless Solution (3.4 MB)
- Gateway Module (614 KB)
Instruction Manuals
General Specifications
Certificates
Drawings
- FN110 Field Wireless Communication Module (323 KB)
- Field Wireless Communication Module (800 KB)
- LN90 Interface Adapter (577 KB)
Looking for more information on our people, technology and solutions?
Contact Us