Having a stable, reliable and accurate measurement is of vital importance for pH measurement and control. The SC25V pH sensor has been developed and designed to make sure that this sensor will deliver these results in every application.
The built-in temperature sensor is located close to the pH measuring glass. This will result in an increased accuracy of the temperature compensation and therefore also the pH measurement. The integrated large Titanium liquid earth will improve the stability measurement countering any stray or ground loop currents that can destroy the reference sensor.
Details
- External titanium Liquid Earth
- Pt1000 integration in pH compartment giving highly accurate temperature compensation
- Certified for use in Hazardous area
- Versatile in-line, immersion or off-line installation
- CIP and Steam cleaning possible*
- Useable up to 130°C / 266°F
- low conductivity applications possible from 10 μS/cm
- SC25V-ALP25 and -BLP25 for chemically harsh applications and high temperatures
- SC25V-AGP25 and -BGP25 for all General Purpose applications
- Available with ID-chip to be compatible with the new SENCOM platform
*note applicable for SC25V-ALP25 and -BLP25
-
Hot-Tap Holder PR10
On-line measurements often present extra challenges, especially when routine maintenance is required. The PR10 is ideally suitable for applications where the sensors must be removed without interrupting or shutting down the process. Without any special tools the PR10 can be retracted safely from the process at pressures up to 5 bar (72 psi). Using the PR10 allows us to place any dissolved oxygen sensor that has a PG13.5 connenction into a retractable assembly.
-
Flow/NPT Fittings FF20/FS20
Yokogawa has invested considerable design and development time in producing a full range of fittings with particular emphasis on designs that reduce installation and maintenance time and consequently save operation costs.
-
Immersion Holder FD20
The immersion fittings are designed for either pH or ORP (Redox) measurements in tanks, open vessels and drains. They have a "hoisting cable" for easy maintenance.
Resources
After extraction from sugar cane or sugar beets, juice must be purified to remove the many other organics and minerals that accompany it. The processing to accomplish this is heavily dependent on reliable pH measurement and control as illustrated.
In stable dispersion of fine particles is the pre-requisite for the selective flocculation technique involving separation of ultra-fine valuable particles from the gangue. Among mineral processing techniques selective flocculation technique is known to have outstanding potential of capturing the particles of particular mineral in slurry of mixed mineral system by selective adsorption of water soluble polymers known as flocculants.
In flue gas desulfurization systems that use magnesium hydroxide (Mg(OH)2) slurry, the consumption of the desulfurization agent (Mg(OH)2) is controlled by using online pH analyzers. A great concern in the pH measurement is heavy staining of the pH electrodes by the Mg(OH)2 slurry. To ensure accurate measurement, frequent cleaning of the electrodes with an acid is required, adding to both maintenance workload and cost.
Industry:Chemical, Power
Brewery is facility to produce beer. Breweries process is the manufacturing process of beer, which is a fermented beverage with low alcohol content made from various types of grain. Wheat, maize and other grains can be used for this. Brewing process starts from malted barley that is to form a mash by milling and mixing with hot water. The malt starches are converted to sugars during this process. This sugar rich water is then strained through the bottom of the mash and will be called as "wort". Then the wort will be brought to boil by bringing to the brew kettle. For bitterness or aroma hops are to be added at different times during the boil. Then the wort is cooled and aerated. And brewers yeast is added for fermentation. From the sweet wort the yeast produces carbon dioxide, alcohol and other byproducts. The GREEN BEER undergoes maturation after fermentation. Filtaration and carbonation are the last steps. Finally the beer will be stay in holding tank until it is bottled or kegged.
For control of batch neutralization, a pH measurement coupled with a timer-controlled chemical feed scheme provides very satisfactory results.
This system can be adapted for either acid waste or alkaline waste neutralization.
Optimizing four key factors will decrease pH sensor costs and optimize process control and overall plant efficiency.
Downloads
Instruction Manuals
- Model SC25V Combined pH sensor (881 KB)
General Specifications
- Model SM21 Industrial pH Electrodes (499 KB)
- Model SR20 Single reference electrode (pH) (2.3 MB)
- SM60 Industrial electrodes for temperature measurement (566 KB)
- SM23 Industrial electrodes for single pNa measurement (931 KB)
- Model SC29 Industrial Redox Electrodes (930 KB)
- Model SC21 Industrial pH Electrodes (702 KB)
- Model SC25V Combined pH electrode (1.2 MB)
- Sensors for Inductive Conductivity Measurement Model ISC40G (S) (2.3 MB)
Technical Information
Certificates
- EU_UK Declaration of Conformity SC25V 2022-10-03 (144 KB)
- TS_FU20/FU24/SC25V (1.8 MB)
- DEKRA 11ATEX0014X-Iss2-E FU20, FU24, SC24V and SC25V (308 KB)
- EACEx_FU20/FU24/SC25V (3.7 MB)
- FM20CA0062X FU20, FU24, SC25V, SC4A, SC42, SX42 (390 KB)
- Ex NEPSI_FU20/FU24/SC25V (878 KB)
- FM20US0123X FU20, FU24, SC25V, SC4A, SC42, SX42 (410 KB)
- PESO_FU20/FU24/SC25V (98 KB)
- Certificate IECEx FU20 FU24 SC24V SC25V (868 KB)
- IECEx_DEK_11_0064X_Iss1 FU20, FU24, SC24V and SC25V (868 KB)
- EAC certificate for sensors (1.8 MB)
Videos
Looking for more information on our people, technology and solutions?
Contact Us