The SS400 MLSS analyzer is a measuring system best suited to continuously and consistently measure the concentration of mixed liquor suspended solids (MLSS) in an activated-sludge treatment process found in sewage or industrial wastewater treatment facilities.
The SS400G MLSS converter has a measuring range as wide as 500-20000 mg/l (ppm). Microprocessor-based, it has a wealth of self-diagnostic functions and alarm contact outputs like other converters in the EXA series, as well as excellent operability.
The SS300G MLSS sensor uses a measuring method that compares transmitted light with scattered light. The sensor is designed with due care to the arrangement of the optical system. These design features enable measurement of even low concentrations, making the sensor less susceptible to disturbing light. The optional jet cleaning unit permits continuous and consistent measurement even in an application where the sensor is exposed to contaminants.
A self-cleaning floating holder is available in addition to free-standing and immersion models, offering a wide range of choices according to the application needs.
Details
Converter
- Wide output ranges, 0-1000 mg/l to 0-20000 mg/l.
- Output in different two ranges.
- Abundant contact outputs.
- Enhanced self-diagnosis functions including failure in light source.
Sensor
- Easy-to-maintain, lightweight, compact probe-like sensor.
- Virtually no need for replacing light source and photodetector unit.
- Pulse-driven light emission, eliminating effects of disturbing light.
- Arrangement of optical system highly immune to effects of light reflecting from boundary surface.
- Choice of jet cleaning unit.
- Choice of various type of holders according to application needs.
Converter
| Measuring object | Concentration of mixed liquor suspended solids (MLSS) in an aeration tank in a sewage or industrial wastewater treatment plant |
| Measuring method | Transmitted/scattered light comparison method |
| Measuring range | 500 to 20000 mg/l |
| Output signal | Two outputs, 4 to 20 mA DC; maximum load resistance: 600 Ω |
| Output range | Minimum 0 to 1000 mg/l Maximum 0 to 20000 mg/l |
| Contact output | Four outputs |
| Contact input | Voltage-free contact for remote range selection and start of cleaning |
| Ambient temperature | -10 to 55℃ |
| Relative humidity | 10 to 90% RH (non-condensing) |
| Construction | Complies with JIS C0920 watertight, IEC IP65 and NEMA 4X standards |
| Supply voltage | 100 to 240 V AC, 50/60 Hz, 24 V DC |
| Power consumption | 22 VA maximum (AC power) 5 W maximum (DC power) |
| Weight | Approx. 2.5 kg |
Sensor
| Shape | Probe-like Sensor |
| Measuring object | Concentration of mixed liquid suspended solid (MLSS) in an aeration tank in a sewage or industrial wastewater treatment plant |
| Measuring principle | Scattered/transmitted light comparison method |
| Measuring range | 500 to 20000 mg/l |
| Temperature of measured object | 0 to 50℃ |
| Pressure of measured object | 0 to 200 kPa |
| Flow velocity | 1 m/sec maximum |
| Cable length | 3, 5, 10, 15 or 20 m |
| Material of wetted part or junction | Body; Stainless steel (304SS or equivalent) Window; glass O-ring; nitrile rubber Cable; PVC |
| Weight | Approx. 0.5 kg plus N x 0.12 kg, where N is cable length |
| Cleaning unit (optional) | Jet cleaning Note: No cleaning unit can be used if the sensor is equipped with a floating ball holder. |
| Material of wiper cleaning unit | Nitrile rubber and 304SS (wetted part) |
| Material of jet cleaning unit | Polypropylene, polyethylene and 304SS (wetted part) |
| Ambient temperature | -10 to 50℃ |
| Construction | Complies with JIS rainproof standard |
| Linearity | ±4.5 % F.S. (by stable kaolin) |
| Repeatability | 2 % F.S. (by stable kaolin) |
| Stability | Zero: ±2 % F.S./day (by city water) Span: ±2 % F.S./day (by calibration kit) |
Resources
In a batch tank, analyzers such as dissolved oxygen (DO) analyzers, oxidation-reduction potential (ORP) meters, and mixed liquor suspended solid (MLSS) analyzers are used. To reduce the maintenance frequency, measures must be taken to prevent dirt accumulation on the sensor. As the liquid level in a tank can vary greatly, great care should be taken when selecting the sensor installation position in a tank.
Downloads
Instruction Manuals
- SS300G MLSS Sensor (642 KB)
- Wiper-Washing Controller (263 KB)
- SS380G MLSS Calibration Kit (394 KB)
- SC510G, DO30G, SS300G Protection of Environment (Use in China) (140 KB)
- SS400G MLSS Converter (3.7 MB)
- WTB10-SS1, -SS2 Terminal Box (594 KB)
General Specifications
- SS400 MLSS Analyzer (1.3 MB)
- Sensor Holders (3.2 MB)
Drawings
- SS400G MLSS Converter (268 KB)
- SS300G MLSS Sensor (84 KB)
- SS380G MLSS Calibration Kit (114 KB)
- Terminal Box WTB10-SS1-NN-## (54 KB)
- Terminal Box WTB10-SS2-NN-## (66 KB)
Looking for more information on our people, technology and solutions?
Contact Us