Liquid Analyzers

Yokogawa’s SENCOM SMART Sensor Platform is an innovative analyzer platform that optimizes maintenance, reduces configuration time, and simplifies in-field maintenance and calibration.

pH and ORP meters, analyzers and transmitters are used for continuous process monitoring of pH and ORP to ensure water/product quality, monitor effluent discharge, batch neutralization, pulp stock, scrubbers, cooling towers, chemical, water/wastewater treatment and many other applications.

pH electrodes and sensors are the sensing portions of a pH measurement. Various installation options including retractable, flow thru, immersion, and direct insertion. Proper pH electrode/sensor selection is critical for optimal measurement results.

Conductivity meters, analyzers and transmitters are used for continuous process measurement and monitoring of conductivity, resistivity, WIFI, demineralizer water, RO water, percent concentration, boiler blowdown and TDS.

Conductivity sensors and electrodes are used to measure process conductivity, resistivity, WIFI, demineralizer water, RO water, percent concentration, boiler blowdown and TDS. Various installation options including retractable, flow thru, immersion, and direct insertion. Proper electrode/sensor selection is critical for optimal measurement results.

Dissolved Oxygen (DO) meters, analyzers and transmitters are used for continuous process measurement and monitoring of milligrams per liter (mg/l),parts per million (ppm), parts per billion (ppb), or % saturation. 

Dissolved Oxygen (DO) electrodes and sensors are the sensing portions of a DO measurement. There are three common technologies for dissolved oxygen measurements: polographic, galvanic and optical. Various installation options including floating ball, retractable, flow thru, immersion, and direct insertion. 

Yokogawa's Turbidity analyzers have been providing reliable turbidity measurement in Water Treatment Plants since 1959. The TB820D and TB830D are next-generation digital Turbidity analyzers that connect to FLXA402T. These are equipped with LED and new diagnostic functions, etc. to significantly reduce maintenance time.

You can find the best solution to meet the application needs, a non-reagent type chlorine analyzer for measuring free chlorine and a reagent type chlorine analyzer for measuring free chlorine or residual chlorine (total chlorine) are available.

The SS400 MLSS Analyzer is a measuring system best suited to continuously and consistently measure the concentration of mixed liquor suspended solids (MLSS) in an activated-sludge treatment process found in sewage or industrial wastewater treatment facilities.

The DM8 liquid density analyzer measures liquid density of general process liquids with high sensitivity and excellent stability. It has a measuring density range of 0 to 2.0 g/cm3, and unaffected by flow rate and viscosity. Besides general-purpose sensor, sanitary and explosionproof sensor are also available.

An FTNIR allows for a real-time continuous measurement of multiple component concentrations in a variety of processes.

The sensor wiring guide incorporates Yokogawa designed and supported sensors and analyzers across the entire liquid measurement product line.

Yokogawa's wet chemistry analyzers are reliable and used for water analysis of sodium, silica, hydrazine and phosphate, so operators can minimize the increased risk of corrosion and associated component failure It can be reduced and mitigated.

This web tool makes it easier to find products according to the application, measurement conditions and required specifications.