UP550 Program Controller (with "E", Enhanced) | Yokogawa Poland

Yokogawa | Co-innovating Tomorrow

UP550

Strona główna
Produkty & Usługi
Nieukończone Produkty
UP550 Program Controller (with "E", Enhanced)

Produkty & Usługi

Ogłoszenie: Ten produkt został wycofany Zobacz ten produkt zastępczy:

Program Controller UP55A

1/4 DIN sized sophisticated Program Controller features 5 powerful control modes and 30 program patterns. It comes with large PV display and LCD display for interactive setting and programming. The universal I/O, "SUPER" and "SUPER2" are also featured. Position proportional, heating/cooling model and RS-485 communication option are also available.

FAQ

How many PV and time events can be set?

(ns-faq-green-9057-spec)

FAQ

In UP550/UP750, the segment switched but the event did not turn OFF.

(ns-faq-green-9059-spec)

FAQ

Can I track PV events to local events?

(ns-faq-green-9058-spec)

FAQ

On the UP550 and UP750 program controller, can I do contact output during an operation parameter end?

(ns-faq-green-9123-setting)

FAQ

Can the lithium battery included with the UT750, UP750, UP550 be replaced?

(ns-faq-green-9122-other)

FAQ

What are the proper uses for meter alarms, PV events, time events, and local events?

(ns-faq-green-9056-spec)

FAQ

After changing the UT's SP values from the MELSEC via CC-Link, when I change the SP value on the UT main unit, I can't change to the same value as before from the MELSEC.

(ns-faq-ut-2026-connect)

FAQ

Can I control chemical dosing?

(ns-faq-green-9023-spec)

FAQ

I'm replacing my GREEN series with the UTAdvanced series. Is there anything I need to be careful of in terms of wiring?

(ns-faq-ut-2108-connect)

FAQ

Can I convert GREEN series (UT300/UT400/UT500/UP500) parameters for use with the UTAdvanced series?

(ns-faq-ut-2060-soft)

FAQ

Can I perform CC-Link communication?

(ns-faq-green-9035-connect)

FAQ

Can I use a heating/cooling type of 1 output?

(ns-faq-green-9069-spec)

FAQ

Can you tell me about the 15 VDC transmitter power supply function?

(ns-faq-green-9030-spec)

FAQ

What is the delay timer in the alarm function?

(ns-faq-green-9074-term)

FAQ

When should I use sensor power supplies (affected models: certain Green series instruments)?

(ns-faq-green-9008-spec)

FAQ

IN is not displayed the first time I turn the power ON.

(ns-faq-green-9013-spec)

FAQ

Can I use an RS-485 communication program written for the GREEN series (UT300/UT400/UT500/UP300/UP500/UM300) on a UT-Advanced series instrument?

(ns-faq-ut-2025-connect)

FAQ

I used the parameter conversion tool to convert GREEN series data for the UTA series. I can’t add the CC-Link communication option code to the converted data.

(ns-faq-ut-2230-spec)

FAQ

Why don't PID items appear?

(ns-faq-green-9044-spec)

FAQ

I'm trying to do AUTO/MAN via communication by writing 0/1 to DO206, but it's not working.

(ns-faq-green-9051-spec)

FAQ

What settings can I use to get control output that is proportional to the input?

(ns-faq-green-9045-setting)

FAQ

Are there independent PIDs for heating and cooling?

(ns-faq-green-9070-spec)

FAQ

What protocol is used when communicating with the Mitsubishi Electric's sequencer?

(ns-faq-green-9037-connect)

FAQ

What models are supported by the LL100/LL200?

(ns-faq-green-9088-soft)

FAQ

There is no control output.

(ns-faq-green-9085-spec)

FAQ

Why is there no output on the cooling side?

(ns-faq-green-9068-spec)

FAQ

I can't switch the SP.

(ns-faq-green-9053-spec)

FAQ

Can you give me details on ladder communication? (Affected products: UT100 series, Green series)

(ns-faq-green-9005-term)

FAQ

Can you give me details on the "Super2" function? (Affected products:Green series)

(ns-faq-green-9003-term)

FAQ

Do you offer programs for communication using calculator link units or serial communication units?

(ns-faq-green-9036-program)

FAQ

What PID should be used for remote input?

(ns-faq-green-9025-spec)

FAQ

Can you give me details on PC link communication? (Affected products: UT100 series, Green series)

(ns-faq-green-9004-term)

FAQ

What items are accessible through a MELSEC connection?

(ns-faq-green-9034-spec)

FAQ

Output stops when the status is STOP.

(ns-faq-green-9031-spec)

FAQ

Is there a MELSEC series with verified connectivity?

(ns-faq-green-9033-select)

FAQ

What is the difference between + and - of the dead zone?

(ns-faq-green-9067-spec)

FAQ

Is ON/OFF available with heating/cooling control?

(ns-faq-green-9066-setting)

FAQ

Can I write the PV value via communication?

(ns-faq-green-9048-spec)

FAQ

Is there a function for resetting alarms?

(ns-faq-green-9075-spec)

FAQ

What registers are accessible in UT link's Auto mode?

(ns-faq-green-9049-spec)

FAQ

Is control output available on a failure?

(ns-faq-green-9084-spec)

FAQ

What is the write limit of 100,000 times?

(ns-faq-green-9046-spec)

FAQ

Please provide information about PCB usage. (GREEN series)

(ns-faq-green-9125-spec)

FAQ

There is no indication on the display in the GREEN series.

(ns-faq-green-9082-spec)

FAQ

Are contacts still good during malfunction?

(ns-faq-green-9081-spec)

FAQ

What should I do when b.out is displayed?

(ns-faq-green-9080-spec)

FAQ

What are energize/de-energize alarms?

(ns-faq-green-9076-term)

FAQ

Are current control output and transmission output isolated?

(ns-faq-green-9028-spec)

FAQ

How do I change the input type?

(ns-faq-green-9014-spec)

FAQ

Do Green series controllers support Ethernet?

(ns-faq-green-9009-connect)

FAQ

Can you give me details on Modbus communication? (Affected products: UT100 series, Green series)

(ns-faq-green-9006-term)

FAQ

Can you give me details on the "Super" function? (Affected products:Green series)

(ns-faq-green-9002-term)

FAQ

Auto-tuning parameters (AT) don't appear.

(ns-faq-green-9043-spec)

FAQ

Can I change setup parameters while the instrument is running?

(ns-faq-green-9015-spec)

FAQ

Is there a function for determining the PID?

(ns-faq-green-9039-spec)

FAQ

I can't set contact input register DI/contact output register DO.

(ns-faq-green-9016-spec)

FAQ

What is the maximum allowed load resistance?

(ns-faq-green-9032-spec)

FAQ

There is no current input range.

(ns-faq-green-9018-spec)

FAQ

What are direct and reverse action?

(ns-faq-green-9017-term)

FAQ

Are the alarm setting values and hysteresis settings set with a percentage?

(ns-faq-green-9072-spec)

FAQ

When I set up alarm values the parameters are initialized and I can't enter the settings.

(ns-faq-green-9071-setting)

Instrukcje obsługi

Informacje techniczne

Digital Indicating Controllers Replacement Guide (9.1 MB)
GREEN to UTAdvanced Conversion Tool Operation Guide (2.0 MB)
GREEN to UTAdvanced Model Conversion Table (289 KB)

Szukasz dodatkowych informacji na temat naszych pracowników, technologii i rozwiązań?