Name: DR231 (ODWOŁANE)
Brand: Yokogawa
SKU: dr231

Ogłoszenie: Ten produkt został wycofany Zobacz ten produkt zastępczy:

Touch Screen GP10/GP20

Model Name: DR231

FAQ

Does the chart paper that comes standard with the DR230 have a time band of 10 mm or 25 mm?

(ns-faq-darwin-8044-spec)

FAQ

What is the recording lifespan of the DR241 (30 ch) ink ribbon?

(ns-faq-darwin-8043-spec)

FAQ

What is the type and lifespan of the battery that retains the DR240 main unit settings?

(ns-faq-darwin-8045-spec)

FAQ

What are the allowable voltage between channels and common mode voltage when connecting batteries (5 V or less) in series and measuring voltage at both poles of each battery on the DR232?

(ns-faq-darwin-8046-spec)

FAQ

How long would it take to copy multiple data files in the DR series' RAM (512 KB) to a floppy disk?

(ns-faq-darwin-8034-spec)

FAQ

With logging recording on the DR232 and DR242, what is the maximum number of channels I can use if the logging interval is set to 1 minute?

(ns-faq-darwin-8041-spec)

FAQ

When I try to change the range on the DR230 hybrid recorder, error code 123 "Attempted to make settings which are not allowed to be made during saving or reading of measured data" appears.

(ns-faq-darwin-8064-setting)

FAQ

If I'm doing manual printing on the DR, is the data printed out at the moment it is triggered (including for key operation)?

(ns-faq-darwin-8036-spec)

FAQ

How can I clear DR digital printout (including the date)?

(ns-faq-darwin-8035-setting)

FAQ

After loading data to floppy disk, if I reopen it, the date and time I reopen it is recorded. Can I record the date/time of measurement?

(ns-faq-darwin-8040-spec)

FAQ

I can't set the data length for loading data into memory on the DR.

(ns-faq-darwin-8037-spec)

FAQ

When does the DR scale printout occur?

(ns-faq-darwin-8038-spec)

FAQ

Can I record all data if the scan interval on the DR is 0.5 seconds?

(ns-faq-darwin-8039-spec)

FAQ

What is the stipulated current value of the DCV/TC input module?

(ns-faq-darwin-8054-spec)

FAQ

Can I forcibly turn the alarm output modules ON/OFF from a PC regardless of any input data alarms?

(ns-faq-darwin-8055-spec)

FAQ

What internal processing occurs of the DI input (non-voltage contact input) from the universal input module and DCV/TC/DI modules?

(ns-faq-darwin-8050-spec)

FAQ

When I add a module and configure the system, are the settings initialized?

(ns-faq-darwin-8058-spec)

FAQ

What is the temperature measurement interval of the universal module's RJC (INT)?

(ns-faq-darwin-8051-spec)

FAQ

Is there a limit on the extender modules?

(ns-faq-darwin-8052-select)

FAQ

When the counter is up, does it go back to zero?

(ns-faq-darwin-8061-spec)

FAQ

When loading data on a PC via RS-232C communication, is a horizontal parity check performed?

(ns-faq-darwin-8047-spec)

FAQ

I’m trying communication from a RS232C communication module (DT300-31) to a recorder using DAQ32 software, but *E0401 Communication error* is displayed and communication fails.

(ns-faq-darwin-8068-connect)

FAQ

When the measurement mode is 20 k and the gauge method is 4 gauge, the range is －5000 µε to +5000 µε(microstrain), but I can measure up to ±20000 µε. What is the accuracy?

(ns-faq-darwin-8062-spec)

FAQ

Is the integral value on the input pulse module the calculated scale value?

(ns-faq-darwin-8060-spec)

FAQ

I'm using a previously delivered DARWIN, but can I use an Ethernet module that supports a new style?

(ns-faq-darwin-8059-spec)

FAQ

What does the specification, "Signal supply rating 15 VDC, 30 mA" mean?

(ns-faq-darwin-8008-spec)

FAQ

What is the difference between RELATIVE and ABSOLUTE in the timer settings?

(ns-faq-darwin-8006-spec)

FAQ

I do a burnout with the burnout setting command (XB) and set +OVER, but even when one side of the thermocouple is open the burnout check doesn't work.

(ns-faq-darwin-8005-spec)

FAQ

When outputting measured data, what happens if I specify channels not identified by the FM command?

(ns-faq-darwin-8002-spec)

FAQ

How many digits are displayed after the decimal point when applying a moving average?

(ns-faq-darwin-8001-spec)

FAQ

What are the burnout determination criteria (just for thermocouples)?

(ns-faq-darwin-8007-spec)

FAQ

What do "initial balancing" (EXEC) and "initialization" (INIT) of the strain input channels mean?

(ns-faq-darwin-8010-term)

FAQ

Can I connect the main unit to a company network?

(ns-faq-darwin-8019-connect)

FAQ

When I changed to Windows 7, I couldn't change the IP address of the Darwin Ethernet module. What should I do?

(ns-faq-darwin-8018-setting)

FAQ

Does DARWIN support Windows XP?

(ns-faq-darwin-8017-spec)

FAQ

When measuring voltage with a universal input module or DCV/TC input module, what is the limit value where an overrange occurs?

(ns-faq-darwin-8029-spec)

FAQ

Why aren't thermocouples included in certificates of results?

(ns-faq-darwin-8014-other)

FAQ

When I acquire DI input with the BFD32 and perform statistical computation (averaging) on the Viewer software, I get computation errors 0 and 1.

(ns-faq-darwin-8004-spec)

Instrukcje obsługi

Szukasz dodatkowych informacji na temat naszych pracowników, technologii i rozwiązań?

Kontakt

DR231 (ODWOŁANE)

Zasoby

Downloads

Instrukcje obsługi

Oprogramowanie

Informacje techniczne

MSDS/SDS