Yes. If you set “Detection type" to “Channel," it will send it when an alarm occurs on the target channel. If you set it to “Alarm level," it sends it when alarms occur at the level set as the target of the channel.
For details, see user's manual IM 04L55B01-01EN.
Powiązane produkty i rozwiązania
-
Modular GM10
SMARTDAC+TM GM10 data logger has a modular architecture that can acquire necessary data. By supporting not only I/O but also many communication protocols such as 920MHz wireless, Modbus and so on. Monitor and setting changes are available through Bluetooth. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.