Rotámetros y Producción de Biodiesel

Introduction 

With the increased interest in green energy and renewable fuel sources, Biodiesel has emerged as a viable alternative to standard petroleum based diesel and home heating oil. It has zero CO2 emissions and can be created from waste vegetable

oil or rendered animal fat. The number of Biodiesel processing plants has grown to over 2500 in the US alone.

Because of the relatively simple process to create Biodiesel, processing plants, whether they are an upstart company working in a basement or a garage producing a couple of hundred gallons a year or a multi conglomerate corporation that can produce several thousand gallons a month. The process is generally same, typically it consists of heating the oil, filtering, chemical injections, moving the oil around to various vessels, allowing the solids to settle, a final filtration and storage,

 Application 

A start up production plant was looking for an accurate, cost competitive, multiplication flow meter that

could be used at several points of their the Biodiesel manufacture process.

1. Monitor the flow of fuel gas and air to heaters used to heat the oil.
2. Monitor oil flow through the filter process
3. Monitor the flow and correctly meter chemical 
additives that are needed for the refinement process.

 

Solution

Because of their versatility and price competiveness Yokogawa's Rotameters were chosen to be the solution to this customer's needs.

Biodiesel Plant Locator

To assist you in locating these Biodiesel opportunities in your
area, below are links that list all the Biodiesel plants in the
United States.


http://www.biodieselmagazine.com/plants/listplants/USA/

http://www.biodiesel.org/production/plants/plants-listing