What do "initial balancing" (EXEC) and "initialization" (INIT) of the strain input channels mean?

When measuring strain with initial balancing (EXEC), measurement is performed using the state with the gauge connected as a reference criterion. Therefore, you must balance the bridge with the gauge connected. This balancing is called initial balancing.
Initialization (INIT) means to restore the value of the internal bridge to its initial state. Through initialization, you can determine the gauge induced change.

DA100-1

Model Name: DA100-1

See More
DA100-2 Portable Hybrid Recorder

DA100-2 Portable Hybrid Recorder

See More
DC100 Data Collectors

Model Name: DC100

See More
DR130

The DR130 can record data in 10 colors from all measurement points at 2-second intervals. It has a variety of recording functions including analog trend recording over an effective recording width of 150 mm, recording of digital measured values, recording of various messages, zone recording, and partially compressed and expanded recording, thus enabling data to be read off speedily.

See More
DR231

Model Name: DR231

See More
DR232 (Expandable model only)

DR232 (Expandable model only)

See More
DR241

Model Name: DR241

See More
DR242

Model Name: DR242

See More