FVX110 필드 버스 세그먼트 인디케이터

소개

FVX110 세그먼트 인디케이터는 컴팩트 한 디자인으로 기존 인디케이터보다 훨씬 많은 지능과 기능을 제공합니다.

 

디스플레이 기능

3 라인 디스플레이를 갖춘 FVX의 Full dot matrix LCD는 연결된 장치에 대한 자세한 정보를 현장 운영자에게 제공합니다. 표준 LED 백 라이트로 어두운 곳에서도 쉽게 볼 수 있습니다.

 

스크롤 노브

FVX 하우징 측면의 고유한 스크롤 노브를 사용하면 수동 조작으로 표시된 정보를 쉽게 전환 할 수 있습니다.

 

다양한 표시

FVX는 상호 동작이 보장된 H1 세그먼트에 FOUNDATION 필드 버스 호환 계측기에서 최대 16 개의 프로세스 변수를 표시 할 수 있습니다.

 

FVX 추가 기능

FVX는 완벽한 FOUNDATION 필드 버스 호환 function block 제품 군을 제공합니다. 또한 Link Master (백업 LAS) 및 온라인 소프트웨어 다운로드 기능을 표준 기능으로 제공합니다.

• Interoperability
  Field instruments that comply with the FOUNDATION fieldbus specifications are fully interoperable; no longer is there a need for custom designed software to communicate with other devices.
• Display of up to 16 process variables
  Up to 16 process variables from multiple field instruments can be displayed, significantly reducing instrumentation costs. Furthermore, support of the FOUNDATION fieldbus digital communications protocol enables the display of signal data from third-party fieldbus compliant field devices.
• Full dot-matrix LCD with LED back light
  The back-lit full dot-matrix LCD clearly displays text and graphics such as bar graphs, a scroll bar, and icons that indicate the page turning direction and scroll knob turning direction.
• Link master function
  The FVX110 supports a link master function that enables backup of network management and allows local control using field devices.
• Function blocks
  To facilitate device diagnostics, two functions blocks each are provided for the multiple analog output (MAO), arithmetic (AR), and input selector (IS), and a single function block is provided for the following: signal characterizer (SC), integrator (IT), and PID.
• Software download
  With this function, it is possible to download updates or upgrades to the FVX110 software. Typical uses of this function are the addition of function blocks and diagnostics for existing devices.
• Self-diagnosis
  A reliable self-diagnostic function based on the NAMUR NE107 standard detects failures in the ambient temperature limit, communications, and hardware such as the LCD and amplifier assembly.

Supply voltage	9 to 32 V DC for general use, flame proof type, Type n, or nonincendive 9 to 24 V DC for intrinsically safe type Entity model 9 to 17.5 V DC for intrinsically safe type FISCO model
Communication requirements	Supply voltage: 9 to 32 V DC Current draw: Steady state: 15 mA (max) Software download state: 24 mA (max)
Ambient temperature limits	-20 to 70 deg C (-4 to 158 deg F)
Ambient humidity limits	0 to 100%RH
LCD display	84 column x 32 lines full dot matrix with LED backlight
Display functions	Process value, unit, tag number, bar graph, page information, scrolling direction information, scroll bar
Display scroll function	Single scroll and cyclic scroll(scan mode)
Housing	Low copper cast aluminum alloy, ASTM CF-8M stainless steel
Degrees of protection	IP67, NEMA4X
Certificates	FM, CENELEC ATEX, CSA, and IECEx
EMC conformity standard	EN61326-1 Class A, Table 2 (for use in industrial locations)
Link master function	Supported
Function blocks	MAO×2 （30 ms, IS×2 (30 ms), AR×2 (30 ms), PID×2 (45 ms), SC×1 (30 ms), IT×1 (30 ms)
Functional specifications	Functional specifications for fieldbus communications conform to the standard specifications (H1) of FOUNDATION fieldbus.

* FOUNDATION in "FOUNDATION fieldbus" and the logo mark of Fieldbus Foundation are registered trademarks of the Fieldbus Foundation.