Korea KR   
Liquid Analyzer for Turbidity and Chlorine FLXA402T
Liquid Analyzers

Liquid Analyzer for Turbidity and Chlorine FLXA402T

1959년부터 수처리장에서 신뢰할 수 있는 탁도 및 염소 측정 지원
일본 시장의 공정분석기 1위 공급 업체*

"신뢰할 수 있는 제품으로 초기 비용 절감"

“원격에서 상태를 모니터링이 필요”

많은 고객이 이러한 문제에 직면하고 있습니다. Yokogawa 탁도 및 염소 분석계는 이러한 문제를 해결합니다.

FLXA402T는 멀티플 연결 기능을 제공하여 여러 개의 분석기가 필요하지 않으며, 더욱 높은 유연성을 제공합니다. 이 4선식 분석기는 8개 언어가 지원되는 간단하고 효율적인 메뉴 구성과 컬러 HMI와 손쉬운 터치스크린 작동을 포함합니다.

모듈식 설계로 구성된 FLXA402T 분석계는 탁도, 염소, pH, 전도도 및 4-20mA 입력을 포함한 각 센서 모듈과 함께 다양한 측정 옵션을 제공합니다. 이중 센서 측정은 설치 공간을 절약하고 염소 분석계의 pH 보상과 같은 추가 기능을 제공합니다.

*2019년 Yokogawa 설문 조사 기준

Details

FLXA402T 특징

최대 2 개의 센서 지원

FLXA402T는 모듈 구조로 되어있으며 최대 2개의 센서 모듈을 삽입할 수 있습니다. 첫 번째 모듈로 탁도 또는 염소 모듈을 선택할 수 있으며, 두 번째 모듈로 탁도 모듈, 염소 모듈, pH 모듈 또는 전도도 모듈을 선택할 수 있습니다.

FLXA402T Module

전문가 가이드: 조작성 향상을 위한 투명 터치패널 디스플레이

FLEXA™ 시리즈 분석계는 선명한 디스플레이와 8개 언어*를 지원하는 사용자 친화적인 화면 구성, 직관적인 터치스크린 작동으로 향상된 조작성을 제공합니다. 또한, 센서의 상태 및 예상 유지 보수 시간 알림을 통해 효율성을 향상시킵니다. 대화형 화면(interactive screen)은 견고한 알루미늄 다이캐스트(die-cast) 하우징에 들어 있습니다.

easy to use touch screen

*8개 언어: 영어, 중국어, 한국어, 독일어, 프랑스어, 스페인어, 포르투갈어, 일본어

고급 유연성: 확장성 향상을 위한 모듈식 설계

FLEXA™ 시리즈 분석기는 교체 가능한 센서 모듈을 갖춘 모듈식 설계를 특징으로 하여 다양한 시스템을 구성할 수 있습니다. FLXA402T를 사용하여 최대 2개의 센서를 연결할 수 있으므로 CAPEX 및 OPEX를 줄일 수 있습니다.

 

미래를 위한 준비

산업 자동화의 큰 흐름은 SMART 장비로 향하고 있습니다. 센서가 아날로그에서 디지털 SMART로 바뀌고 있으며, 이러한 전환은 플랜트 운영에 영향을 미칠 것이며, 이를 완전히 구현하는 데에는 다소 시간이 걸릴 수 있습니다.

고성능 독립형 분석계 FLXA402T는 Yokogawa SENCOM4.0 플랫폼의 구성 요소이기도 합니다. SMART 센서 시스템은 문제 해결을 위하여 예측 자산 관리의 상태 정보와 센서 상태에 대한 심층적인 정보를 보유하고 있기 때문에 더 많은 통찰력을 제공합니다.

SENCOM4.0 플랫폼을 사용하면 차세대 SMART 제품으로 쉽게 업그레이드할 수 있으며 운영에 거의 영향을 주지 않고 언제든지 수행할 수 있습니다.

Easy to get information and operate from remote place

데이터 이동성

간편한 데이터 전송 및 원격 서비스를 위한 SD 카드 또는 이더넷을 통해 심층적인 프로세스 분석이 가능합니다.

적용 분야

  • 일반 공정에 사용되는 수돗물, 하수, 강물 및 물의 탁도 측정
  • 배수관망, 펌프장, 물 공급처, 학교 및 공공시설에서의 염소 분석

Analyzer specialized for water applications

시스템 구성

탁도 및 염소 2 in 1 시스템 구성

염소 센서 장치와 탁도 센서 장치는 하나의 분석계에 연결할 수 있습니다. 또한 두 번째 센서 모듈에서 염소 및 탁도 센서 연결 대신 염소 센서 장치, 탁도 감지기, pH 센서 또는 전도도 센서를 연결할 수 있습니다.

System Configuration FLXA402T-FC800D-TB820D

Turbidity Measurement 

Easy to clean cell structure, Automatic wash system, Light life time light source

Right Angle Scattered Light Turbidity Detector TB820D

The TB820D is SENCOM4.0 family and can connect to FLXA402T. Thanks to smart unit equipped detector, TB820D gives you more insight in ordinary operation.

Learn more

FLXA402T-TB820D

Chlorine Measurement 

Minimize chlorine injection, remote maintenance and reduce maintenance time

Non-reagent Type Free Available Chlorine Sensor Unit FC800D

The FC800D is SENCOM4.0 family and can connect to FLXA402T. Thanks to smart unit equipped behind of electrode unit, FC800D gives you more insight in ordinary operation.

Learn more

FC800D

Residual Chlorine Sensor Unit RC800D

The RC800D is suitable for various water condition measurements and gives you stable and high quality measurement thanks to rotation electrodes and high quality reagent pump.

Learn more

FLXA402T and RC800D System

pH and Conductivity Measurement

You can find the best pH and Conductivity solution for your process

YOKOGAWA’s pH and Conductivity sensors are highly reliable and very unique. You can select the most valuable sensor.

pH and conductivity sensors

자료실

Application Note
Water Quality Monitoring at Water Treatment Plants  
Thumbnail
1.7 MB
Overview:

SENCOM
Application Note
Measuring Water Quality at Water Purification Plants
Thumbnail
Overview:

Japan's Potable Water Quality Standard was fully revised in 2004, increasing the number of water quality standard items for which tests are required has increased to 50. As items necessary for water quality management, the authority has specified an additional 27 complementary parameters to set the targets for water quality management.

업종:
Can we use ultrasonic cleaning for both Turbidity detector in case of two Turbidity detector connection (FLXA402T with two TB820D)?
(an-flxa402t-10)
Yes, FLXA402T+PG400 supports ultrasonic cleaning for both Turbidity detectors.
Are the filters for the TB820D (Right Angle Scattered Light Turbidity Detector) same as those of TB750G?
(an-flxa402t-12)
Yes, 0.2μm mesh filter and 1.0μm mesh filter for TB820D are same as TB750G. You can select zero turbidity filter in case; Measuring range is 2.0 NTU or greater: 1μm Measuring range is less than 2.0 NTU: 1μm + 0.2μm ...
Can we reduce pH dependency by using external pH sensor for compensation in the FC800D (Non-reagent Type Free Available Chlorine Sensor Unit) measurement?
(an-flxa402t-11)
Yes, you can use pH compensation for -F1 model. Please use this function in case of fluctuate pH value. If it is difficult to decide which is better, please fill pH fluctuation in the Inquiry Sheet and contact us. ...
Do we need to adjust optics after light source replacement in the TB820D (Right Angle Scattered Light Turbidity Detector)?
(an-flxa402t-14)
No, you don’t need to do any adjustment. Just replace light source.
Can we buy the TB820D (Right Angle Scattered Light Turbidity Detector) flow-cell?
(an-flxa402t-15)
Yes, you can buy flow-cell and glass windows as a spare part.
What is the TB820D (Right Angle Scattered Light Turbidity Detector) head tank difference between D1, D2 and D3? Is head tank necessary?
(an-flxa402t-16)
We strongly recommend using head tank in any case for stable measurement. If your facility has enough pretreatment and there are no bubbles, you can install the TB820D without head tank. D1 pressurized head tank is suitable for under 2 NTU measuremen...
What is included in K9411UA (1μm Zero Filter Assembly) and K9726EF (0.2μm Zero Filter Assembly) for the TB820D (Right Angle Scattered Light Turbidity Detector)? Do we need to buy K9008ZD (Filter Element 1μm) and K9726EG (Filter Element 0.2μm)?
(an-flxa402t-17)
K9411UA and K9726EF consist of filter case and filter element. K9008ZD and K9726EG are only filter element and you can use them in case of filter replacement.
What are the standard consumables for the TB820D (Right Angle Scattered Light Turbidity Detector) and how often do they require replacement?
(an-flxa402t-18)
Parts No. Name Remarks QTY Recommended Replacement Period K8003DN LED ASSY (Red Light) For code – NT. RED light source. For red light sources. 1 3 years K8003DP LED ASSY (Infrared Red Li...
What is the difference in construction on the electrode for F1 & C1 in the FC800D (Non-reagent Type Free Available Chlorine Sensor Unit)?
(an-flxa402t-22)
The rotating electrode material changes. -F1 = Gold electrode+celamic beads. -C1 = Gold/Platinum alloy+glass beads. They change the plateau characteristic and reduce combined chlorine sensitivity. On the other hand, available pH range becomes smaller...
What are the maintenance parts for the FC800D (Non-reagent Type Free Available Chlorine Sensor Unit)?
(an-flxa402t-23)
Parts No. Name Remarks QTY Recommended Replacement Interval K8005JB Measurement electrode (rotating electrode) Gold electrode for –F1,－F2, and –F3 1 Yearly K8005JC Measurement electro...
Why is the RC800D (Reagent Type Residual Chlorine Sensor Unit) required air purge?
(an-flxa402t-25)
Air purging is required for electrode unit and liquid pump by air pump or compressor air (industrial air). It is required to protect electrode from chlorine gasses which will affect the metal parts.
Are the FC800D (Non-reagent Type Free Available Chlorine Sensor Unit) and the RC800D (Reagent Type Residual Chlorine Sensor Unit) suitable for outdoor installation and having any anti corrosive coating for outdoor environment?
(an-flxa402t-26)
The FC800D and the RC800D are not suitable for outdoor installation. Strongly recommend installing inside because of pump structure. If you want to install outside, a separate rainproof cover is required and take care install place environment (no co...
What is empty cell detection for the FC800D (Non-reagent Type Free Available Chlorine Sensor Unit) and the RC800D (Reagent Type Residual Chlorine Sensor Unit)?
(an-flxa402t-20)
Rotation electrode will get damaged in case there is no water in the measurement cell. To avoid this situation, the FC800D and the RC800D measurement electrode rotation is automatically stopped. This function makes rotation electrode lifetime longer ...
What would happen if we don’t replace the FC800D (Non-reagent Type Free Available Chlorine Sensor Unit) and the RC800D (Reagent Type Residual Chlorine Sensor Unit) beads?
(an-flxa402t-28)
Beads become gradually smaller because of friction, and decreases cleaning efficiency. So, we recommend replacing beads once a year.
It has two input modules in the FLXA402T (Liquid Analyzer for Turbidity and Chlorine), what can be connected on each module?
(an-flxa402t-02)
FLXA 402T Multi Sensor variation 1st module TB820D FC800D FC800D FC800D FC800D TB820D TB820D 2nd module TB820D FC800D TB820D Analog pH Analog Conductivity Analog pH sensor Analo...
Do we need to configure the FLXA402T (Liquid Analyzer for Turbidity and Chlorine)?
(an-flxa402t-01)
You don't need to do any difficult setting. The FLXA402T configurations have already optimized for selected measurement when it is shipped.
How many decimal points can the FLXA402T (Liquid Analyzer for Turbidity and Chlorine) show?
(an-flxa402t-03)
Maximum digit is three decimal points, default is 2 decimal points.
Can the Auto Range switching in the FLXA402T (Liquid Analyzer for Turbidity and Chlorine) be turned off?
(an-flxa402t-04)
Yes, it can be turned off.
Which buffer tables pH are available in the FLXA402T (Liquid Analyzer for Turbidity and Chlorine)?
(an-flxa402t-05)
PH4, pH7 and pH9 tables complied by NIST, DIN and US standards are available.
Can we measure pH and ORP with the FLXA402T (Liquid Analyzer for Turbidity and Chlorine)?
(an-flxa402t-06)
The FLXA402T can connect a pH sensor, but an ORP sensor is not available. For ORP measuring, please select the FLXA402. (Not FLXA402T)
Which conductivity sensors can connect to the FLXA402T (Liquid Analyzer for Turbidity and Chlorine)?
(an-flxa402t-08)
Static conductivity sensor is available. Inductive conductivity sensors are not available. For inductive conductivity sensor measuring, please select the FLXA402. (Not FLXA402T)
Can the 2nd module for pH in the FLXA402T (Liquid Analyzer for Turbidity and Chlorine) be configured for a Wash function?
(an-flxa402t-09)
Ultrasonic cleaning is available.
Can we measure conductivity and resistivity in the FLXA402T (Liquid Analyzer for Turbidity and Chlorine)?
(an-flxa402t-07)
Conductivity measuring is available in the FLXA402T. For resistivity measuring, please select the FLXA402. (Not FLXA402T)
What is the maximum cable length between the FLXA402T (Liquid Analyzer for Turbidity and Chlorine) and analyzers?
(an-flxa402t-13)
Maximum 20m is available. If you want to use more than 20m cable, please contact us.
Can we save and copy the FLXA402T (Liquid Analyzer for Turbidity and Chlorine) configurations?
(an-flxa402t-19)
Yes, you can save and copy the FLXA402T configurations by SD card. It realizes easy installation and replacement.
Can you switch the measurement ranges on the transmitter, or do we have to specify the ranges when ordering in the TB820D, the FC800D or the RC800D ?
(an-flxa402t-27)
Within ordered range, you can set the FLXA402T analog output range seamlessly. Cannot change ordered analyzer measurement range.
What are the maintenance parts for the RC800D (Reagent Type Residual Chlorine Sensor Unit)?
(an-flxa402t-24)
Parts No. Name Remarks QTY Recommended Replacement Interval - Primary acetic acid (CH3COOH) grade: over 99.0+% For reagent preparation -   - Sodium acetate (CH3COONa) grade: over 98.0%...
What are the FC800D (Non-reagent Type Free Available Chlorine Sensor Unit) measurement ranges?
(an-flxa402t-21)
  -F1 -C1 -F2, -F3 Chlorin conc < 1 mg/L >1 mg/L < = 3 mg/L < = 3 mg/L < = 5 mg/L < = 10 mg/L pH pH: 6 to 8 pH: 6.5 to 7.5 pH: 6.5 to 7.5 pH: 6.5 to 7.5 ...

Downloads

Brochures
Instruction Manuals
General Specifications
Technical Information

동영상

Product Overview
Smart Water Management System providing clean and safe water
Thumbnail
Overview:

For more details, visit "www.yokogawa.com/CL-TB/"

기술 및 솔루션, 요꼬가와에 대한 자세한 정보를 찾고 계십니까?

견적 및 기술문의
Top