Generally, when measuring high voltage and high current transformer signals, you use a VT (voltage transformer) and CT (current transformer). The ratios between the primary and secondary rated voltages and rated currents are the VT and CT ratios. For example, if the rated primary current/rated secondary current is 500 A/5 A, the CT ratio is 100. The same holds for VT. If not using a VT or CT, each ratio is 1.
Related Products & Solutions
-
PR201 Power Monitors
The PR201 Power Monitors was discontinued on 1/01/2006. The PR300 is a replacement product.
-
UPM01
Model Name: UPM01
-
UPM02
Model Name: UPM02
-
UPM03
Model Name: UPM03
-
UPM100/UPM101
UPM100 / UPM101 은 컴팩트 전력 모니터로서 1대당 최대 15개의 전력아이템을 측정합니다.
-
UZ002
Model Name: UZ002
-
UZ003
Model Name: UZ003
-
UZ005 Power Monitors
The UZ005 Power Monitors was discontinued on 9/01/2006. The PR300 is a replacement product.
-
UZ008
Model Name: UZ008
-
전력감시 패키지 SMARTDAC+ GM/UPM100
전력감시 패키지 SMARTDAC+ GM/UPM100은 920MHz 무선 기능을 지원하는 전력 모니터 UPM 100과 데이터 수집 시스템 GM으로 구성된 에너지 절약 모니터링을 위한 데이터 수집 시스템입니다. 공장에서 사용하는 전력값을 쉽게 가시화(그래프)하고 보고서를 생성합니다. 사용되는 전기의 낭비를 방지하여 에너지를 절감할 수 있습니다.