Korea KR   
In SENCOM, which cables should be used for what?

In SENCOM, which cables should be used for what?

The WU11 is to connect the SA11 to the FLXA402, UM33A-S, SMARTDAC+ or any other HOST system.
WU11-…-V: for FU20F, FU24F, SC25F, and IB100
WU11-…-S: for SA11, BA11, IB100, and –VS sensors

Related Products & Solutions

  • Digital SMART SENCOM™ Adapter, SA11

    Reusable SMART adapter, requiring only the analog sensor to be disposed of when it reaches the end of its lifetime. With the SENCOM 4.0 platform, Yokogawa delivers reduced costs and waste while contributing to its long-term business goals of a sustainable future for all.

    See More

  • Digital SMART SENCOM™ Sensor Interface Box, IB100

    By using SMART sensors, calibration data is stored within the sensor’s memory chip. Calibration data can be downloaded or uploaded to and from the SENCOM™ sensor and received HMI. The software allows the operator to monitor pH/ORP sensor performance, calibrate and configure various parameters.

    See More

  • UM33A-S SENCOM HMI Type

    UM33A-S는 디지털 SENCOM 스마트 아답터 SA11에 연결된 센서와 사용 가능합니다. UM33A-S의 주요 기능은 센서의 측정 값을 표시하고 센서를 교정하는 것입니다. 

    See More
Top