Italy IT   
LL100
Prodotti & Servizi

LL100 PC-based Parameter Setting Tool (Enhanced) (Obsoleto)

Avviso: Questo prodotto non è più disponibile dal….

The software package that enables you to set the GREEN Series controllers configuration parameters via the optical communications adapter attached on controller front panel. Parameter data upload and download, read, write and print parameters, file management, trend display, tuning functions are available.

Resources

The LL100/LL200 installation failed.
(ns-faq-green-9099-soft)
Please check the following. Have you met the minimum system requirements? Are you using full-width characters for the login user name?  
Can I use non-USB connections with the latest version of the LL100/LL200?
(ns-faq-green-9100-soft)
Yes, the latest version of the LL100/LL200 can connect to instruments with serial ports, as in previous versions.
Can I delete unneeded segments in the program pattern creation screen?
(ns-faq-green-9097-soft)
In the upper part of the screen, from the Edit item, select Segment delete.
Can I perform data logging using LL100/LL200?
(ns-faq-green-9096-soft)
Yes, by using the Multilogging function. However, all data are not saved. Only data that was saved to CSV. Unsaved data is discarded.
What is the PC port for the dedicated LL100/200 cable?
(ns-faq-green-9012-connect)
It requires a USB port.
Can I use user files from older versions of the LL parameter setting tool (up to R2.07) as-is?
(ns-faq-green-9102-soft)
Yes. Click the Open menu command. In the user file open dialog box, under File type, select the extension of the old tool file, or All files. Select the files you want to open. The file name extensions of the old tool are 4td, 5td, 5pd, 7td, and...
What is the Batch copy function?
(ns-faq-green-9108-soft)
The Batch function is for copying all program patterns of a single controller. <Collective reading> All patterns in a program pattern controller are saved, 1 pattern per file, to a specified folder (on a PC hard disk). Ex.) If you perform coll...
With the LL100/LL200, are communications possible with the UT320/UT350/UP350 using a dedicated adapter?
(ns-faq-green-9116-1-spec)
Yes, if it is an enhanced model. If the product has been enhanced, an "E" appears on the front panel model name, as in "UT320E."
What is the trend interval setting range?
(ns-faq-green-9113-soft)
1 to 3600 seconds. However, if there are many units connected and the setting is short, processing may not occur within the trend interval. If this happens the on-screen communication status lamp will turn red, and you should slow the interval settin...
How many data can be saved to a CSV file?
(ns-faq-green-9112-soft)
Up to 65000 times' worth of data can be saved, regardless of the trend interval. Note that if 65000 is exceeded, the oldest data is replaced by new data.
What is the difference between the "Open" menu command and "Open program pattern data?"
(ns-faq-green-9109-soft)
For example, if you select UP550 format and "open" a UP750 file, the format will be UP750. But if you "Open program pattern data," you will open the UP750 file in UP550 format. By using the "Open program pattern data&quo...
Can I purchase an adapter or cable for LL100/ L200 separately?
(ns-faq-green-9094-soft)
No. LL100/LL200 has been discontinued.
Can I save measured data to a CSV file using LL100/LL200?
(ns-faq-green-9095-soft)
Yes. Use the Multimonitor function.
Can I extend the LL100/LL200 cable?
(ns-faq-green-9093-soft)
Yes. Use a standard USB extension cable. Note that per the USB standard you should not use an extension cable longer than 4 meters.
What is the output format of recorded data of LL100/LL200?
(ns-faq-green-9021-spec)
CSV file format.
What types can be recorded with the Multimonitor function of LL100/LL200?
(ns-faq-green-9020-spec)
PV/SP/OUT/Alarms.
How many units can be monitored with the Multimonitor function of LL100/LL200?
(ns-faq-green-9019-spec)
A total of 16 loops can be monitored. Cascade control entails using 2 loops per controller, therefore 8 units could be connected.
What are the LL100 and LL200?
(ns-faq-green-9086-soft)
They are software programs for the Green series. In addition to setting parameters, the LL100 comes with functions including program pattern creation, tuning, and multi monitoring. The LL200 has the functions of the LL100 plus a UT750/UP750 custom co...
A timeout error occurs during communication with the LL.
(ns-faq-green-9079-spec)
The adapter might not be attached properly, or the adapter batteries (2 x AA) may be spent. If using the UT320/321/350/351, check whether the LL parameter on the main unit is ON.
Which operating systems are supported by the LL100/LL200?
(ns-faq-green-9087-soft)
The following OS are supported. Windows XP (Home Edition/Professional) (x32) Windows Vista Business (SP1) (x32) Windows 7 Professional (x32/x64)  
Can I purchase separate cables for LL100/LL200?
(ns-faq-green-9091-soft)
No. LL100/LL200 has been discontinued.
How long is the included cable of LL100/LL200?
(ns-faq-green-9092-soft)
2.7 meters.
What are included in the package with the LL100/LL200?
(ns-faq-green-9090-soft)
The software itself, USB drivers, adapter, cable, and user's manual.
What models are supported by the LL100/LL200?
(ns-faq-green-9088-soft)
The UT300/400/500/700 series, and the UP350/351/550/750. However, the LL200 custom computation function is only compatible with the UT750/UP750.
How many units can I connect and monitor at the same time?
(ns-faq-green-9111-soft)
For single-loop models such as the UT351, up to 16. For 2-loop control on the UT750, up to 8.
I cannot select UP350/351 with the LL100/LL200 program pattern setting tool.
(ns-faq-green-9110-soft)
By design, UP350/351 program patterns are set by using the parameter setting tool.
After changing the UT's SP values from the MELSEC via CC-Link, when I change the SP value on the UT main unit, I can't change to the same value as before from the MELSEC.
(ns-faq-ut-2026-connect)
As for individually writing parameters via CC-Link, changing OUT area values constitutes a write request. In your case, since the OUT area value hasn't changed from the previous value, the SP value is notoverwritten. As a fix, periodically copy t...
Can I convert GREEN series (UT300/UT400/UT500/UP500) parameters for use with the UTAdvanced series?
(ns-faq-ut-2060-soft)
Yes, you can use the GREEN-UTAdvanced parameter data conversion tool (available as free download). Using the LL100/LL200 parameter setting tool, save the GREEN series parameters to a file, convert them using the conversion tool, then apply the settin...

Downloads

Instruction Manuals

Cerchi più informazioni su tecnologia, soluzioni o sulla nostra squadra?

Contattaci
Top