"Maximizing VSD efficiency by monitoring cable temperature"
Customer Concerns
The importance of VSDs in industrial operations
Variable speed drives (VSD) are used in a wide range of industries to control the speed of machinery such as compressors and pumps. The advantage of VSDs is that they are more energy efficient than conventional fixed-speed drives (gas turbines and the like), and it allows motors to run over speed through the use of frequency control (Hertz).
Overheating of high voltage power transmission cables
When a VSD outputs a high voltage, however, its high voltage power cable can overheat and this can lead to problems such as voltage drops, equipment malfunctions, and fires. The major cause of cable overheating is harmonic distortion.
In many cases, users just select an output voltage based on prior experience, without having accurate information on cable temperature. As a result, they are unable to get optimum performance from their compressors and pumps.
The Solutions and the Benefits
Maximizing VSD efficiency by monitoring cable temperature
With its optical fiber sensor cable, the Yokogawa DTSX distributed temperature sensor is able to monitor the temperature of a high voltage power cable accurately and in real time. This solution allows users to dynamically control the VSD voltage output level (Frequency). While maintaining a safe state, productivity can be dramatically improved.
For instance, a Yokogawa customer has set an alarm to sound when the cable temperature reaches 85 degrees Celsius, and has set a maximum VSD operating limit of 90 degrees Celsius. By continually monitoring temperature in real time, this customer has been able to increase natural gas production by up to $120,000 per day per unit.
Even in harsh environments where a power cable is exposed to higher temperatures, the DTSX can provide the information needed to safely and efficiently operate a VSD.
Hot spot monitoring: Early detection of abnormal overheating
The DTSX can accurately monitor the temperature of long optical fiber sensor cables continuously, and with one meter resolution can pinpoint the location of hot spots due to excessive loading. Quick detection helps to prevent fires and unplanned plant shutdowns.
Equipment trend monitoring for efficient maintenance
With its ability to monitor temperatures 24/7/365, the DTSX generates the data needed to visualize normal state power transmission cable operating conditions. By comparing this historical data with data that is collected in real time, it is possible to identify when an older power cable no longer is able to perform as specified. This enables not only fire prevention but proactive, condition-based maintenance.
How DTSX Works
Measuring the intensity of Raman scattered light
Using pulses of laser light beamed through an optical fiber cable, the DTSX is able to detect temperature-dependent variations in signal frequency that are the result of a phenomenon known as Raman scattering that occurs along the entire length of the optical fiber cable, and it also can determine the locations of those temperature readings using light that is bounced back (backscattering) to the source.
Example: Along a 6,000 meter optical fiber cable, nearly 6,000 measurement points
By measuring how long it takes light to make a round trip back to the source (backscattering), the DTSX is able to calculate the location for each temperature reading. Abnormalities can be located with a spatial resolution of just one meter.
Looking for more information on our people, technology and solutions?
Contact UsProdotti e Soluzioni Correlati
-
DTSX1 Fiber Optic Heat Detector
DTSX1 stores the functions required for heat detection in one box. DTSX1 analyzes the temperature data with high accuracy by measuring with fiber optic sensor cable and perform high temperature heat detection.
-
DTSX200 Distributed Temperature Sensor
The DTSX200 is a standard version that is ideal for temperature measurement, for medium-sized areas, and for areas where the distance of fiber optic sensor cables is short. It has excellent environmental resistance because it consumes less power and is less dependent on the temperature measurement environment.
-
DTSX3000 Distributed Temperature Sensor
The DTSX3000 is a distributed temperature sensor developed in response to the demand that “one unit be used to monitor temperature distribution a longer distance and a wider area”. A flagship model that meets the expectations for long-distance temperature measurement and high temperature resolution.
-
Fiber Optic Temperature Sensor DTSX
The DTSX fiber optic temperature sensor, which uses optical fiber for the temperature sensor, quickly detects and locates abnormalities in equipment by monitoring temperatures at production facilities located far away and across wide areas 24 hours a day, without omission. Highly accurate predictive maintenance avoids downtime and ensures stable plant operation.