Notice: This product was discontinued on Sep 30, 2021.

There is no alternative model. Please contact your local VEGA office.

Measuring Principle

Short ultrasonic impulses in the range of 35 to 70 kHz are emitted by the transducer to the measured product, reflected by the product surface and received again by the transducer. The pulses are spread with sound velocity. The time from emission to reception of the signals is proportional to the level in the vessel. The proven ECHOFOX signal processing analysis the reflections in the vessel based on long-standing experience and detects the level signal reliably. The adjustment of the sensors is very simple without changing the level.

Contact

< Notes>

These products are released to the Customers in the following Sales area.

(1) Sales area : Australia, New Zealand, South East Asia, India, Middle East

(2) Customers : Customers for bundled solution, major project and selected global major accounts

We can also provide Level switches : Vibration(SWING, VIB, WAVE) & Capacitance(CAP).
For more information, please contact our sales.

Singapore (Regional Head Quarters)	Yokogawa Engineering Asia Pte. Ltd. 5 Bedok South Road, Singapore 469270, Singapore Phone: (65)-6241-9933　　Fax: (65)-6241-2606
Australia	Yokogawa Australia Pty. Ltd. Tower A, 112-118 Talavera Road, Macquarie Park NSW 2113, Australia Phone: (61)-2-8870-1100　　Fax: (61)-2-8870-1111
Thailand	Yokogawa (Thailand) Ltd. 799 Rama 9 Road, Bangkapi, Huaykwang, Bangkok 10310 Thailand Phone: (66)-2-715-8600　　Fax: (66)-2-715-8688
India	Yokogawa India Ltd. Plot No.96, Electronic City Complex, Hosur Road, Bangalore - 560 100, India Phone: (91)-80-4158-6000　　Fax: (91)-80-2852-0625
Middle East	Yokogawa Engineering Middle East FZE- Dubai P.O.Box 18112, Jebel Ali Free Zone, Bldg no. LIU FZS1-BH03, Free South Zone, Dubai, UAE Phone: (971)-4-8049100　　Fax: (971)-4-8860844

* For the users in Japan, click here.

Application

Level in liquids

Sensors with higher frequencies are used for measurement of liquids.
Independent of product properties they deliver a continuous measuring signal and are ideal for water/waste water applications and the measurement of weak acids and lyes. Sensors with respective approval are available for applications in gas-Ex areas.

son60y-figure1

Level in bulk solids

Sensors with low frequencies and bigger transducers are used for measurement in bulk solids. Typical applications are level measurement of bulk solids containers, bulk solids silos with average size dimensions and open heaps. Approved sensors are available for applications in dust-Ex areas.

son60y-figure2

Specifications

Model / Application	Measuring Range Accuracy	Process Fitting	Process Temperature	Process Pressure
SON 61Y Liquids and bulk solids in small vessels	Liquids: 0.25 to 5 m Bulk solids: 0.25 to 2 m +/- 10 mm	Thread G½, 1½ NPT	-40 to +200 deg C	-2 to +2 bar (-20 to +200 kPa)
SON 62Y Liquids and bulk solids in small vessels	Liquids: 0.4 to 8 m Bulk solids: 0.4 to 3.5 m +/- 10 mm	Thread G2, 2 NPT	-40 to +80 deg C	-0.2 to +2 bar (-20 to +200 kPa)
SON 63Y Liquids and bulk solids in all industries	Liquids: 0.6 to 15 m Bulk solids: 0.6 to 7 m +/- 10 mm	Compression flange DN 100, mounting strap	-40 to +80 deg C	-0.2 to +1 bar (-20 to +100 kPa)