Les transmetteurs de la série EJX-B de Yokogawa combinent les fonctionnalités de notre série de pur-sang EJX-A avec la communication sans fil ISA100 pour offrir de nouvelles opportunités et possibilités.
Tous les produits compatibles Yokogawa ISA100 peuvent s’intégrer à n’importe quel réseau conforme.
-
EJX110B Transmetteur de Pression Différentielle Sans Fil
Le transmetteur de pression différentielle sans fil haute performance EJX110B comprend un capteur résonant en silicium monocristallin et convient à la mesure du débit de liquide, de gaz ou de vapeur ainsi que du niveau, de la densité et de la pression.
-
EJX118B Transmetteur de Pression Différentielle Sans Fil, Avec Séparateurs Déportés
Les séparateurs à membrane sans fil sont utilisés pour empêcher le fluide process d'entrer directement dans la chambre de mesure des transmetteurs de pression différentielle. Ils sont connectés au transmetteur à l'aide de capillaires remplis de fluide de remplissage.
-
EJX210B Transmetteur de Pression Différentielle Sans Fil à Bride
Le transmetteur de pression différentielle sans fil à bride haute performance EJX210B comprend un capteur résonant en silicium monocristallin et convient à la mesure de niveau, de densité de liquides en cours de solidification ou de précipitation.
-
EJX310B Transmetteur de Pression Absolue Sans Fil
Le transmetteur de pression absolue sans fil haute performance EJX310B comprend un capteur résonant en silicium monocristallin et convient à la mesure de liquide, de gaz ou de vapeur
-
EJX430B Transmetteur de Pression Relative Sans Fil
Le transmetteur de pression relative sans fil haute performance EJX430B comprend un capteur résonant en silicium monocristallin et convient à la mesure de liquide, de gaz ou de vapeur
-
EJX438B Transmetteur de Pression Relative Sans Fil, à Séparateur Déporté
Le séparateur à membrane sans fil sont utilisés pour empêcher le fluide process d'entrer directement dans la chambre de mesure des transmetteurs de pression. Il est relié au transmetteur à l'aide d’un capillaire remplis d’une huile spécifique.
-
EJX510B Transmetteur en Ligne de Pression Absolue Sans Fil
Le transmetteur de pression absolue sans fil haute performance EJX510B comprend un capteur résonant en silicium monocristallin et convient à la mesure de liquide, de gaz ou de vapeur
-
EJX530B Wireless In-Line Mount Gauge Pressure Transmitter
Le transmetteur de pression relative sans fil haute performance EJX530B comprend un capteur résonant en silicium monocristallin et convient à la mesure de liquide, de gaz ou de vapeur.
-
Product Finder
This web tool makes it easier to find products according to the application, measurement conditions and required specifications.
Details
| Wireless Specifications | Communication protocol | ISA100.11a protocol |
| Data rate | 250 kbps | |
| Frequency | 2.400-2.4835 GHz license free ISM band | |
| Radio security | AES 128 bit codified | |
| RF Transmitter power | Max. 11.6 dBm (fixed) | |
| Antenna | +2 dBi Omni directional monopole type For amplifier housing code 8 and 9, separately sold remote antenna and antenna cables can be used |
|
| Performance specifications | Absolute Pressure Accuracy | 1MPa or higher: ±0.2% of span |
| Update Time | 0.5 to 3600 s selectable | |
| Functional Specifications | Battery Pack | Battery packs with long life lithium-thionyl chloride batteries. With the intrinsically safe type, the battery pack is replaceable in hazardous area. |
| Battery Characteristic | Typical battery life is 10 years at 60 seconds update time or 4 years at 10 seconds update time in the following conditions.* • Ambient temperature: 23±2°C • Device role: IO mode • LCD display: off (* Environmental condition such as vibration may affect the battery life) |
|
| Degrees of Protection | IP66/IP67, NEMA4X | |
| Ambient Temperature Limits | -40 to 85°C (-40 to 185°F) -30 to 80°C (-22 to 176°F) LCD visible range |
|
| Regulatory compliance Statement | Explosion Protected types | ATEX, FM, CSA, IECEx Intrinsically safe Approval |
| EMC Conformity Standards | EN61326-1 Class A, Table 2 (For use in industrial locations), EN61326-2-3 | |
| R&TTE Conformity Standards | ETSI EN 300 328, ETSI EN 301 489-1, ETSI EN 301 489-17, EN61010-1, EN61010-2-030, EN62311 | |
| Regulation Conformity of the Wireless Module | • FCC Approval • IC Approval |
|
| Safety Requirement Standards | EN61010-1, EN61010-2-030 |
Ressources
ISA100 wireless temperature and pressure transmitters.
Eliminating the wire using wireless transmitter is the perfect solution for rotating equipment. It establishes data collection between the transmitter and the gateway by reliable communication even though the dryer was rotating.
ISA100 wireless temperature and pressure transmitters with orifice plates allow:
- No cabling installations or maintenance.
- Small amount of hardware and simple equipment implementation means minimizing potential vandalism.
ISA100 Wireless Monitoring
- Gateway x1, Temperature Transmitter (YTA) x3, Pressure Transmitter (EJX) x1, Repeater x1
Gateway is installed at control room and 3m height extended antenna is set.
- Temperature Transmitter (YTA) and Pressure Transmitter (EJX) are installed at each monitoring point.
- Repeater is installed on high position.
- Oil level measurement of diesel tanks that feed fuel to their diesel generator's which are at three locations and 400 meters apart from each other.
- Also to measure level , pressure and flow to and from their main storage yard.
ISA100 Wireless Temperature and Pressure Transmitters
- Gateway x1, Temperature Transmitter (YTA) x1, Pressure Transmitter (EJX) x1
High quality wireless communication confirmed
- Packet Error Rate (PER) is 0 to 2.5%/ 5 days
Download this eBook and learn:
- The basic physics of pressure
- Different types of pressure sensors
- Features of pressure transmitters
- Pressure transmitters communications standards
- Key characteristics of pressure
- Common types of diaphragm seals
Using wireless technology for monitoring a variety of measuring points in Industrial Plants has becoming a very attractive choice for plant managers. Today, the plant manager is able to build a quick and cost effective network solution to enable flexible information acquisition and to improve maintenance efficiency and safety.
Downloads
Brochures
Général Spécifications
- EJX110B, EJX310B, EJX430B Differential Pressure and Pressure Transmitters (2.7 MB)
- Field Wireless System Overview (1.9 MB)
- EJX118B, EJX438B Diaphragm Sealed Differential Pressure and Gauge Pressure Transmitters (2.4 MB)
- EJX210B Flange Mounted Differential Pressure Transmitter (2.6 MB)
- EJX510B, EJX530B Absolute and Gauge Pressure Transmitters (1.6 MB)
Technique Information
Certificats
- RE Declaration of Conformity (EJX110B) (1.3 MB)
- RE Declaration of Conformity (EJX118B) (238 KB)
- RE Declaration of Conformity (EJX210B) (239 KB)
- RE Declaration of Conformity (EJX310B) (4.6 MB)
- RE Declaration of Conformity (EJX430B) (4.4 MB)
- RE Declaration of Conformity (EJX438B) (2.5 MB)
- RE Declaration of Conformity (EJX510B) (1.3 MB)
- RE Declaration of Conformity (EJX530B) (1.3 MB)
Rechercher plus d'informations sur nos compétences, technologies et solutions
Contactez-nous