CENTUM VP

Field Control Station (FCS)

For over 40 years, Yokogawa has been developing and delivering stable, high quality CENTUM systems. All the CENTUM series field control stations (FCSs), both software and hardware, have been developed by Yokogawa. CENTUM VP can be flexibly designed ranging from small- to large-scale.

The CENTUM VP controller is capable of handling a massive amount of field data at comfortable speeds that fully satisfies the needs in the field digital era.

Both the controllers and I/O node units can be placed in remote, classified locations (IEC Zone 2/Class I Div. 2) which saves installation cost.

We know single bit of software and hardware to maintain a 99.99999% availability service record.

Reliable Controller

The CENTUM VP controller features outstanding processing performance and a large application storage capacity, yet inherits the same quality and stability that are the hallmark of the CENTUM series. Processor modules, power supplies, I/O modules, and communication buses all support redundant configuration.

The latest release of the controller has been optimized to take full advantage of advancements in field digital technology that will help plants operate with increased efficiency and stability. A high speed remote I/O unit enables connecting controllers over remote site up to 50 kilometers via optical fiber cables.

Digital Field Network Support

CENTUM VP supports a wide variety of communication interfaces and digital field networks such as FOUNDATION™ fieldbus, PROFIBUS-DP, Modbus RTU, Modbus CP/IP, and DeviceNet.　Device diagnosis communication and SOE functions are enhanced. Changes in the mechanism to access device data have contributed to reduce loading to the main processors and improves the performance of the plant asset management software, Plant Resource Manager (PRM).

Pair and Spare Architecture

This is a unique feature of the CENTUM series that improves the stability of process control. Each processor module has redundant CPUs that execute the same computations simultaneously. Their outputs are constantly compared and a bump-less switchover to the stand-by processor module is initiated if any anomalies caused by electronic noise or other phenomena are detected. This minimizes the likelihood that errors will have any impact on process control. Our pair & spare technology is the key to achieve the 99.99999% of availability.

Image Zoom 

 

 

N-IO (Network I/O)

N-IO (Network I/O), the next-generation software configurable smart I/O, reduces footprint, lowers marshalling costs and allows flexible I/O binding. Matched with the Field Commissioning Support Package, our commissioning tool, this allows for significantly faster project completion and reduced costs without compromising on quality.

Universal I/O and Software Marshalling

N-IO has AI/AO/DI/DO in each I/O channel. Each I/O channel can be changed to other I/O types by software programming.

Adapter (Built-in Signal Conditioner)

N-IO implements a wide variety of built-in signal conditioners on its baseplate. In most cases, there is no need to prepare external signal conditioning or the additional space this requires.

Redundancy

The same N-IO baseplate supports both single and dual redundant formations, eliminating the need for multiple hardware/software vendors when implementing redundancy.

Intrinsically Safe Barriers

The N-IO baseplate supports Intrinsically Safe I/O barriers.

FIO (Field network I/O)

FIO (Field network I/O) is a series of low-cost I/O modules which have been developed to improve packaging density. The large available range of modules enables you to configure your system to match the requirements for process signals, and to provide for different levels of isolation.

Isolation types

Non-isolation, isolation (all channels are collectively isolated), and isolation (each channel is individually isolated)

Field connection

Pressure clamp (Weidmuller), dedicated terminal boards, and MIL cables

Environmental resistance

Class G3 corrosive gas and a wide range of operating temperatures

Hazardous area classification

Type N and non-incendive protection provided as standard. I/O modules with a built-in intrinsic safety barrier available.

Virtualization Platform

This translates to customer's business centric benefits like smooth migration to new physical hardware with reduced downtime, shorter migration process and system tests time.
From maintenance point of view, segregation of hardware and software maintainability are also the significant advantages.

Integrated Operations

CENTUM VP achieves the Operational Excellence that is the focus of Yokogawa's Production Excellence, Safety Excellence and Asset Excellence initiatives. It offers integrated viewing and data handling functions.

For example, alarms from the ProSafe-RS Safety Instrumented System and Plant Resource Manager, Yokogawa's Asset Management product, can be seen and handled seamlessly in the Human Interface Station (HIS). All plant process data and device data are handled by CENTUM VP.

Easy to operate with clear visibility

Yokogawa offers an intuitive and easy-to-understand HMI environment for plant operation and monitoring, which is the result of vast experience with CENTUM systems in operation. Flexibility in displaying operation windows and monitors helps in adapting to various aspects of operation needs.

CENTUM VP provides easy-to understand graphics based on the ergonomics and knowledge engineering. For instance, data displays are provided with high visibility that enables intuitive awareness of the situation. The use of colors considers the best contrast and environments of the central control room and the configuration of the displays integrates the knowhow of experienced operators. With all these functions, CENTUM VP enables operators to make quick and accurate decisions during operations and contributes to improve operation efficiency.

System message banner

Continuously displays the latest alarm messages, keeping operators up to date on process conditions.

Browser bar

Contains navigation tools for the convenience of operators, frequently-used icons can be grouped in a My Favorites folder.

Window history

Lists the previous operational displays. Operators can quickly call up previously-used graphics windows.

Alarm System

AOG (Advanced Operator Graphics) Solution

The AOG solution emphasizes ergonomic design and seeks, through improved color selection, layout, and visual function, to improve operators situational awareness. A team of Yokogawa engineers visited many plants to conduct a detailed analysis, review the tasks carried out by operators, and learn about the plant's operations. In accordance with general principles on industrial design and human engineering, Yokogawa then redesigned the GUIs for the HMI displays to reduce operator errors, make their work easier to perform, and reduce physical stress.

By using the Trend Recording

By using the Trend Recording function, process data such as temperature, pressure and flow rate coming into the Control Station are gathered by the HIS, and the time-series changes in the process data are displayed in a graph (trend graph).

The HIS trend recording function acquires a variety of trend data types, suitable for a continuous process plant and a batch process plant. The continuous-type data acquisition is suitable for recording and monitoring data for a long period of time. The batch-type data acquisition starts and stops acquiring data according to the commands received from operators. Comparison between the actual data and a reference pattern is also available for the batch-type.

Operation Keyboard

A unique USB keyboard is available for CENTUM VP option. The 64 function keys and the numeric keypad can be used by operators to call up graphics by pressing a single key.

Switching between frame tabs can be done by pressing the container window key. The keyboard has two built-in speakers and the key pitch complies with IEC 9241-11.

A touch sensor highlights the selected operating instrument on the screen to prevent unintentional input errors.

A single-loop operation keyboard and an 8-loop simultaneous operation are available.

Engineering

Yokogawa paves way for a new engineering paradigm for the next-generation. It is not uncommon for a project to experience backsliding and significant rework, all of which affects the TCO (Total Cost of Ownership). Yokogawa's engineering prevents these inefficiencies and ensures our customers reap all these benefits throughout a plant’s lifecycle.

Yokogawa provides smart engineering thanks to three innovative products.

• Automation Design Suite, Yokogawa's engineering environment
• N-IO (The Network I/O), Yokogawa's software configurable smart I/O
• Field Commissioning Support Package, Yokogawa's commissioning tool for N-IO

Flexible I/O Binding with N-IO and Field Commissioning Support Package

After the DCS is sent to a site, design changes often happen due to physical restrictions of implementation or inadvertent miscalculations and these changes can significantly affect the project schedule. And shortening the term of a project is an ever-present challenge. Flexible I/O binding, Yokogawa’s improved late I/O binding solution, helps overcome these customer challenges.

Reducing the Risks to Scheduled Project Delivery

The flexible I/O binding facilitates simple and hassle-free I/O binding. This is made possible by software marshaling and the N-IO’s universal channels. The type of I/O and the interconnection between the I/O module and the controller can be modified remotely which significantly absorbs the impact of last-minute I/O changes. Furthermore, the flexible I/O binding achieves early delivery of I/O cabinets to the site, and problems can be found and fixed on-site at a very early stage.

Early Start-up

The flexible I/O binding shortens duration of a project. After I/O design is fixed, application engineering and hardware engineering can progress independently and parallel. This is made possible by System Independent Loop Commissioning. System Independent Loop Commissioning project capability utilizes Yokogawa's Field Commissioning Support Package, an innovative tool allowing the field testing and validation of N-IO without requiring a deployed system.

The Automation Design Suite

The Automation Design Suite, Yokogawa's new engineering environment, retains the entire engineering history of your plant from design phase, through commissioning and live operation; which ensures up-to-date plant knowledge with every expansion, or hardware and software change throughout your lifecycle.

Module Based Engineering

The Automation Design Suite adopts a Modular approach to automation design and execution, where process loops (regulatory/complex Loops and sequence control), alarm design philosophy, graphics and more are deployed as design patterns. Also multiple application modules can be handled as one module (Group Module). These functions enable easily downloaded, efficiently shared and re-used as standards across the enterprise, saving time and resources.

YOKOGAWA leverages its long history and vast expertise in process automation, with standardized, industry proven engineering modules available that span a broad range of processes and functions for production, safety and asset excellence.

Management of Change and Resources

The Automation Design Suite is more than the ‘As built’ specification of your plant… It provides dynamic management of design, investment and project effectiveness by auditing and versioning engineering changes, and facilitating effective engineering through ModPacks (Modification Packages).

This serves to maintain project schedules by reducing the delays and the engineering impact of late design changes or scope changes. The Automation Design Suite also auto-documents and checks inconsistencies in project activity and software resources, removing the pain from project management, and significantly reducing project risk.

Methodology

Agile Project Execution

Support the Field Digital Communication

Yokogawa realized the potential of field networks in a production control system early on and designed its systems with field networks in mind. CENTUM VP supports FOUNDATION™ fieldbus, HART®, PROFIBUS-DP, PROFINET, DeviceNet™, Modbus®, Modbus/TCP, Ethernet®/IP and ISA100 Wireless™ (ISA100.11a wireless standard). The CENTUM VP integratedly controls and monitors these field devices from various vendors with various communication protocols.

Applying Fieldbus in Plant Control System

The engineering for fieldbus function blocks can be performed in the same way as for other function blocks in FCS. The operation and monitoring environment is also the same for the fieldbus function blocks and other FCS function blocks. No additional requirements for engineering, operation and monitoring of the fieldbus applications in Yokogawa DCS. The most favorable merit for applying fieldbus is highly efficient maintenance of field devices. Yokogawa offers an asset management software package, Plant Resource Manager (PRM), for device management and diagnosis. With PRM, the advantage of fieldbus can be optimized so as to make the maintenance of the whole system more efficient.

Plant Resource Manager (PRM)

The maintenance information of devices are collected by PRM via fieldbuses and stored in the PRM database. The corresponding maintenance schedules, maintenance procedures and spare parts information are also stored accordingly in the same database. The maintenance of the field devices can be performed through fieldbus. Thus the maintenance engineers are considerably relieved from going to the fields of the devices in the remote areas and hazardous areas.

Go to the related web page (Asset Management and Integrity)

Audit Trail

Audit trail management is important in both control and maintenance systems. All maintenance works on devices, which are maintained by PRM, are recorded and stored, and can be easily retrieved too.

Predictive Maintenance

By integrated management of device management information, the replacement cycle of devices and trend of device troubles can be predicted. This technique minimizes the impact of device problems on plant operation, and maintenance work and parts procurement can also be planned and scheduled.

Solutions to Non-Fieldbus Devices

PRM can create a database for legacy devices in addition to Fieldbus devices. Maintenance information is recorded and managed in a database for integrated, overall planned maintenance of all devices in the plant.

DD and CF Download

The FOUNDATION™ fieldbus device files in this section are categorized according to whether the devices have undergone Host Interoperability Support Testing (HIST). HIST is an invaluable tool in determining whether a specific fieldbus device is interoperable with a host system.

About HIST at Yokogawa

• FOUNDATION™ fieldbus laboratory is established in Yokogawa Singapore.
• Yokogawa is running the HIST program according to the FOUNDATION™ fieldbus specifications.
• Yokogawa is continuing development of HIST in cooperation with other device manufacturers.
• The list of field devices that have passed the HIST can be checked on the Interoperability page.

Interoperability Menu

List of HIST Completed Devices
List of FIST Completed Devices

Recommended FOUNDATION™ fieldbus Accessories

Data Integration

Unified Gateway Station (UGS)

The unified gateway station (UGS) acts as an interface, allowing CENTUM VP to communicate with STARDOM network-based control systems or other third-party subsystems such as Modbus RTUs, Modbus/TCP units, EtherNet/IP units, OPC DA units, and intelligent electronic devices (IEDs). It utilizes the IEC 61850 protocol, which has been widely adopted by the power industry.

* The following two GS are available from the download tab.

• Unified Gateway Station (UGS) Standard Function
• Unified Gateway Station (UGS2) Standard Function
• IEC 61850 IED Communication Package (for UGS/UGS2)

Product Security

Click here for information on system product security

Lifecycle Solution

System Software Updates

Periodically, system software must be brought up to date by adding new functions, enhancing existing functions, and fixing bugs. For a variety of reasons, many of our customers would prefer to wait for a scheduled plant shutdown to update their system software to the latest version. Even if a customer has not yet installed an earlier version of the software, Yokogawa guarantees that the system will keep working normally and without interruption when the latest software version is installed. Yokogawa also guarantees that the software will be fully compatible.

System Modification & Expansion

Our customers often need to modify or expand a control system after it is installed, and major concerns with this include avoiding disruptions to plant operations, minimizing the shutdown period, and minimizing the risks of a hot system cutover.

Yokogawa offers a virtual environment for FCS and HIS where both the control and operator functions of the CENTUM database can be tested without FCS hardware. It ensures the new programs will work when they are installed, reduces risks of system failures, and minimizes the shutdown period.

Upgrading (moving from one Yokogawa system to another Yokogawa system)

For each of its CENTUM systems, Yokogawa has paid particular attention to helping its customers manage lifecycle costs by optimizing the upgrade process. Upgrading is simple and quick.

All of Yokogawa's legacy CENTUM systems can be controlled and monitored from a newer CENTUM system. Via a control network, CENTUM VP can control and monitor operations at a plant that relies on a CENTUM V, CENTUM-XL, CENTUM CS, or CENTUM CS 3000 system. The latest CENTUM VP can also communicate with both the N-IO and the more traditional FIO and Yokogawa will continue to sell and provide long-term support to both types of I/O. Thus, by allowing its customers to utilize their existing assets wherever possible, Yokogawa offers them a cost-effective way to upgrade their production control systems.

Migration (moving from a non-Yokogawa system to a Yokogawa system)

CENTUM has been Yokogawa’s DCS brand since 1975, when the first generation CENTUM system was released to the market. Many of our competitors in the DCS market have either been acquired by other companies or have disappeared from the market together with their control systems. Only a handful of the companies that were first active in this market are still around today.

Not satisfied with another vendor’s control systems? Consider migrating to it to CENTUM VP. We have successfully migrated over 350 non-Yokogawa systems so far and the number is steadily growing. To name a few: Bailey INFI90, Foxboro I/A, Emerson RS3/PROVOX/DeltaV, Eurotherm, Hartman & Brown ContronicP, Hitachi, Honeywell TDC2000/TDC3000/PKS, Siemens SIMATIC, Taylor MODCELL, Toshiba, Allen-Bradley PLC.

40 year history of CENTUM

Compressor control

Introducing CCC Inside™ for Yokogawa CENTUM VP

CCC Inside™ is designed for seamless integration with Yokogawa’s CENTUM VP FCS, enabling you to run CCC control applications directly from Yokogawa’s hardware. With CCC Inside™, you can streamline operations and empower more personnel to manage your equipment. Plus, you get access to CCC knowledgeable project and field engineers, with expertise developed over thousands of installations, different processes and machine arrangements.

CCC Inside HMI Libraries