DA100-1 | Yokogawa France

Yokogawa | Co-innovating Tomorrow

DA100-1

Produits & Services

Mode d'Emploi: Ce produit a été arrêté le Voir ce produit de remplacement :

Modular GM10

Instruction Manuels
Questions fréquentes
Support technique

Model Name: DA100-1

Questions fréquentes

On the DA100, I'm monitoring input by alarm levels. Can I set it up so that when any OR relay within 200 channels outputs it bypasses the subunits?

(ns-faq-darwin-8032-setting)

Questions fréquentes

How can I order a test certificate for the DA100 Quick Start Package and the Network Package?

(ns-faq-darwin-8031-other)

Questions fréquentes

Can I use the extender module (DV100-011) with the DA100 Quick Start package?

(ns-faq-darwin-8049-select)

Questions fréquentes

If using a DA100 and DI/DO module or alarm output module, is there a way to output alarms from relays (for temperature measurements between 100°C and 500°C)?

(ns-faq-darwin-8056-setting)

Questions fréquentes

What is the communication protocol with the dedicated cable for the expansion model?

(ns-faq-darwin-8003-spec)

Questions fréquentes

When connecting the DA100 and monitoring trends, the PC's time differs from the time displayed in the trends.

(ns-faq-daqworx-13045-spec)

Questions fréquentes

While using the DA100, I try to save data to a floppy disk but error code 139 (Other media related error) appears and the data is not saved. What should I do?

(ns-faq-darwin-8030-spec)

Questions fréquentes

DAQ32Plus can't communicate with the DA100 via Ethernet.

(ns-faq-daqworx-13042-connect)

Questions fréquentes

When measuring current 3-phase 3-wire active power on the DA100, I can't set the scale so that I can drop the 250 V, 50 A input current down to 5 A for measurement.

(ns-faq-darwin-8028-spec)

Questions fréquentes

I'm using the DA100＋DAQ32＋strain module. In the DARWIN settings (hardware configurator), "Balance" is not active under Comm. > Action.

(ns-faq-darwin-8009-spec)

Questions fréquentes

What cable do I need for an Ethernet connection with the DA100?

(ns-faq-darwin-8022-spec)

Questions fréquentes

When connecting the DA100 and PC (DAQ32) using an RS-232C cable, is there a way to change the communication speed from 9600 bps to 38400 bps?

(ns-faq-darwin-8020-setting)

Questions fréquentes

Does the time of data measured on the DA100 depend on the PC?

(ns-faq-darwin-8025-spec)

Questions fréquentes

When I connect the DA100 via RS-232-C and use DAQ32 Plus to acquire data, the performance bar goes to OVER and I lose data. What should I do?

(ns-faq-darwin-8027-spec)

Questions fréquentes

What are the DA100's physical shock specifications (when not powered)?

(ns-faq-darwin-8024-spec)

Questions fréquentes

I'm using a previously delivered DARWIN, but can I use an Ethernet module that supports a new style?

(ns-faq-darwin-8059-spec)

Questions fréquentes

When I add a module and configure the system, are the settings initialized?

(ns-faq-darwin-8058-spec)

Questions fréquentes

Can I forcibly turn the alarm output modules ON/OFF from a PC regardless of any input data alarms?

(ns-faq-darwin-8055-spec)

Questions fréquentes

Is there a limit on the extender modules?

(ns-faq-darwin-8052-select)

Questions fréquentes

Is the integral value on the input pulse module the calculated scale value?

(ns-faq-darwin-8060-spec)

Questions fréquentes

What is the stipulated current value of the DCV/TC input module?

(ns-faq-darwin-8054-spec)

Questions fréquentes

I'm considering replacing the DA100 and DS600 with a GM10. In place of the SMARTDAC+ GM10 subunit, can I connect a GX60 expansion unit?

(ns-faq-gm-14025-spec)

Questions fréquentes

I'm considering replacing the DARWIN (DA100) with the SMARTDAC+ GM10. Can I use a DARWIN extension cable to connect the units?

(ns-faq-gm-14059-spec)

Questions fréquentes

What is the temperature measurement interval of the universal module's RJC (INT)?

(ns-faq-darwin-8051-spec)

Questions fréquentes

I communicate with the DA100 via GP-IB. If I replace the DA100 with the SMARTDAC+ GM10, can I use GP-IB communications?

(ns-faq-gm-14026-spec)

Questions fréquentes

I’m trying communication from a RS232C communication module (DT300-31) to a recorder using DAQ32 software, but *E0401 Communication error* is displayed and communication fails.

(ns-faq-darwin-8068-connect)

Questions fréquentes

When the measurement mode is 20 k and the gauge method is 4 gauge, the range is －5000 µε to +5000 µε(microstrain), but I can measure up to ±20000 µε. What is the accuracy?

(ns-faq-darwin-8062-spec)

Questions fréquentes

When the counter is up, does it go back to zero?

(ns-faq-darwin-8061-spec)

Questions fréquentes

Why aren't thermocouples included in certificates of results?

(ns-faq-darwin-8014-other)

Questions fréquentes

What is the difference between RELATIVE and ABSOLUTE in the timer settings?

(ns-faq-darwin-8006-spec)

Questions fréquentes

What are the burnout determination criteria (just for thermocouples)?

(ns-faq-darwin-8007-spec)

Questions fréquentes

I do a burnout with the burnout setting command (XB) and set +OVER, but even when one side of the thermocouple is open the burnout check doesn't work.

(ns-faq-darwin-8005-spec)

Questions fréquentes

When outputting measured data, what happens if I specify channels not identified by the FM command?

(ns-faq-darwin-8002-spec)

Questions fréquentes

How many digits are displayed after the decimal point when applying a moving average?

(ns-faq-darwin-8001-spec)

Questions fréquentes

What internal processing occurs of the DI input (non-voltage contact input) from the universal input module and DCV/TC/DI modules?

(ns-faq-darwin-8050-spec)

Questions fréquentes

What does the specification, "Signal supply rating 15 VDC, 30 mA" mean?

(ns-faq-darwin-8008-spec)

Questions fréquentes

What do "initial balancing" (EXEC) and "initialization" (INIT) of the strain input channels mean?

(ns-faq-darwin-8010-term)

Questions fréquentes

When loading data on a PC via RS-232C communication, is a horizontal parity check performed?

(ns-faq-darwin-8047-spec)

Questions fréquentes

Can I connect the main unit to a company network?

(ns-faq-darwin-8019-connect)

Questions fréquentes

When measuring voltage with a universal input module or DCV/TC input module, what is the limit value where an overrange occurs?

(ns-faq-darwin-8029-spec)

Questions fréquentes

Does DARWIN support Windows XP?

(ns-faq-darwin-8017-spec)

Questions fréquentes

When I changed to Windows 7, I couldn't change the IP address of the Darwin Ethernet module. What should I do?

(ns-faq-darwin-8018-setting)

Questions fréquentes

When expandable model subunits are connected serially, if a middle subunit's power cuts out, what happens to the downstream subunits?

(ns-faq-darwin-8013-spec)

Questions fréquentes

When I acquire DI input with the BFD32 and perform statistical computation (averaging) on the Viewer software, I get computation errors 0 and 1.

(ns-faq-darwin-8004-spec)

Questions fréquentes

The DA100 and DAQ32Plus are connected, but I can't record.

(ns-faq-daqworx-13051-connect)

Instruction Manuels

*Discontinued: Operating Flow (361 KB)
*Discontinued: DV500 AC Adapter (272 KB)
*Discontinued: DA100 Communication Interface (574 KB)
*Discontinued: Data Acquisition Unit DA100 (3.2 MB)

Technique Information

DARWIN Replacement Guide (9.1 MB)

Rechercher plus d'informations sur nos compétences, technologies et solutions