France FR   
How can I use the SMARTDAC+ GX/GP series' digital input module to start/stop recording with contact ON/OFF?

How can I use the SMARTDAC+ GX/GP series' digital input module to start/stop recording with contact ON/OFF?

You can do this with an event action. For the settings, see section 1.19.2, “Event Action Setting Example" in the user’s manual.

Note that to operate a controller with contact ON/OFF, you must set the operation mode of the digital input module to Remote. For details, see section 1.11.3, “Setting the Operation Mode of a Module" in the user's manual.

Les produits et solutions liés

  • Touch Screen GP10/GP20

    The SMARTDAC+TM GP10/GP20 is a portable paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GP utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    Voir plus

  • Touch Screen Paperless Recorder GX10/GX20

    The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GX utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    Voir plus
Haut