Can I leave the screw at the bottom of the SMARTDAC+ GM's module loosened?

No, you must tighten that screw. If you do not tighten it, external vibration or other factors may result in poor contact or other problems.

Les produits et solutions liés

  • Modular GM10

    SMARTDAC+TM GM10 data logger has a modular architecture that can acquire necessary data. By supporting not only I/O but also many communication protocols such as 920MHz wireless, Modbus and so on. Monitor and setting changes are available through Bluetooth. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    Voir plus

Haut