Europe EU   
How can I set the recorded data type to "Display" and the recording interval to "2 sec" with SMARTDAC+ GX/GP series?

How can I set the recorded data type to "Display" and the recording interval to "2 sec" with SMARTDAC+ GX/GP series?

The display data settings are found in: MENU key > Browse tab > Setting > Setting menu > Recording Settings > Basic settings. From there, perform the following steps.

  1. Tap File type > Display.
  2. Tap Save.

The recording interval settings are found in: MENU key > Browse tab > Setting > Setting menu > Display settings > Trend interval. From there, perform the following steps.

  1. Tap interval [/div] > 1 min (2s)
  2. Tap Save.

For details, see “Advanced Operation (Various settings and operation)” in the first step guide (IM 04L51B01-02EN), and section 1.9, "Setting Recording Conditions (Recording mode, recording interval, saving interval" in the user's manual (IM 04L51B01-01EN).

 

Related Products & Solutions

  • Touch Screen GP10/GP20

    The SMARTDAC+TM GP10/GP20 is a portable paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GP utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    See More

  • Touch Screen Paperless Recorder GX10/GX20

    The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GX utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    See More
Top