AR Series Surge Arresters

The high-performance AR surge arrester absorbs the potential of an inductive lightning surge caused by a lightning discharge to protect electronic instruments. The plug-in arrester consists of a separable main unit and terminal block.

  • Absorbs large surge voltages immediately.
  • Simple circuit configuration and excellent adaptability to a distributed control system.
  • Plug-in connection of the main unit with the terminal block, eliminating concerns about an open-circuit state even if the main unit is removed.
  • Support JIS
    *1: JIS C 5381-21 (category:C1,C2):
          AR-SA, AR-HA, AR-TC, AR-RT, AR-HP, AR-LP, AR-SP, 
          AR-SY, AR1-B2, AR1-D6
    *2: JIS C 5381-1(classⅡ):
          AR-PS, AR-PH, AR-PW

  

Details

Model Description
AR-SA Arrester for Current Signal 
0 to 100 mA DC(12 to 30 V DC signal line)
AR-HA Arrester for Current Signal 
0 to 100 mA DC(48 to 65 V DC signal line)
AR-TC Arrester for Thermocouple (mV signal line)
AR-RT Arrester for RTD and Potentiometer
AR-LP Arrester for 2-wire Pulse Signal (50 V DC or less)
AR-HP Arrester for 2-wire Pulse Signal (90 V DC or less)
AR-SP Arrester for 3-wire Pulse Signal (50 V DC or less)
AR-PS Arrester for Power Supply (100 V AC, 2 A)
AR-PH Arrester for Power Supply (200 V AC, 2 A)
AR-PW Arrester for Power Supply (100 V AC, 20 A)
AR-SY Arrester for Selsyn (90 V AC)
AR1-B2 Arrester for Communication Line (DC to 300 kHz)
AR1-D6 Arrester for Communication Line (DC to 2 MHz)

Recursos

Preguntas Frecuentes
Can I use the AR-RT for the Pt50 Ω RTD?
(ns-faq-ar-16005-select)
Preguntas Frecuentes
Preguntas Frecuentes
Preguntas Frecuentes
Preguntas Frecuentes
Preguntas Frecuentes
Preguntas Frecuentes
Preguntas Frecuentes
Preguntas Frecuentes
Preguntas Frecuentes
Preguntas Frecuentes
Preguntas Frecuentes
Preguntas Frecuentes
Can I mount on DIN rails?
(ns-faq-ar-16004-select)
Preguntas Frecuentes

Descargas

¿En busca de información adicional sobre Yokogawa Iberia, tecnología y soluciones?

Contáctenos

Top