YTA80 (INTERRUMPIDO)

The YTA80 is a head mount type of temperature transmitter that accepts thermocouple, RTD, ohms or DC milivolts input and converts it to digital communication signal based on FOUNDATION™ Fieldbus protocol. 
The YTA80 conforms to the standard DIN formB head mounting.

Common specifications:
Supply voltage, DC: Standard, YTA80/KN2:    9 – 32V
ATEX, YTA80/KS2:    9 – 30V
In FISCO installations:    9 – 17.5V
Consumption:    < 11mA
Max.current increase in the event of an error:    < 7mA
Isolation voltage, test:    1.5kVAC for 60sec
Isolation voltage, operation:    50VRMS/75VDC
Warm-up time:    30sec
Signal/noise ratio:    min.60dB
Response time (programable):    1 – 60 sec
Updating time:    < 400ms
Execution time, PID controller:    <200msec
Execution time, analogue input:    <50msec
Signal dynamics, input:    24 bit
Calibration temperature:    20 – 28ºC
Ambient temperature limits:
(Option code may affects limit)    -40ºC to +85ºC
Vibration:    IEC 60068-2-6 and IEC60068-2-64
Lloyd’s specification no.1:    4g/2 – 100Hz
Humidity:    < 95%RH (non-cond.)
Tightness (enclosure / terminal):    IP68/IP00
Weight:    55g