Check that the LL parameter is ON (LL=ON).
If you can't perform front panel communications even if LL=ON, check whether you can communicate using the back panel terminal.
If you can, it may be noise. Remove the communication lines.
Productos y Soluciones Relacionadas
-
UT320 Digital Indicating Controller
The UT320 Digital Indicating Controller was discontinued on 1/01/2010. The UT35A/UT32A Temperature Controller is a replacement product.
-
UT321 Digital Indicating Controller
The UT321 Digital Indicating Controller was discontinued on 1/01/2010. The UT35A/UT32A Temperature Controller is a replacement product.
-
UT350 Digital Indicating Controller
UT350 Digital Indicating Controller
-
UT351 Digital Indicating Controller
UT351 Digital Indicating Controller