Introduction
In the manufacturing process of Pharmaceutical, Chemical and Food & Beverage industries, the cleaning and sterilization of tanks and piping are done with various cleaning solutions, fresh or hot water and steam after manufacturing products. Clean- In-Place (CIP) is the system designed for automatic cleaning and disinfecting. The recovery of cleaning solutions contributes significantly to reduce chemical costs and wastewater processing costs.
Yokogawa FLXA202/FLXA21 inductive conductivity transmitter has earned a reputation in the recovery of cleaning solutions because it can take measurements with good boundary surface precision over a wide range.
CIP Process Flow
Expected Benefits
- Optimizes cleaning and sterilizing application for tanks and piping by use of CIP
- Reduces operating costs
Process Overview
CIP systems depend on the process differentiations of Pharmaceutical, Chemical and Food & Beverage. In addition, the cleaning solutions and chemicals are different. The chemicals that are generally used are hypochlorous acid, caustic soda, and nitrous acid. In a cleaning solution recovery system, the process lines and piping are cleaned with an initial cleaning solution. After that, the cleaning solution is cleaned with fresh water. The cleaning solution is recovered at that point, but since it gradually becomes diluted with fresh water, recovery is discontinued and the solution is discharged through a drainage line when the concentration of the cleaning solution drops below the standard value. The cleaning with different solutions or fresh water, the recovery of the cleaning solution, and the discharge of waste solution are repeatedly carried out. In addition, sterilization with steam or cleaning with distilled water or de-ionized water is performed as a final step in some cases.
Solution Details
| Measurement system | |
|---|---|
| 2-wire inductive conductivity system | |
| Sensor | ISC40G(J) |
| Flow-through type holder | ISC40FF(J) |
| Transmitter | FLXA202-D-B-D-☐☐-C5-NN-A-N-LA-J-NN |
| Dedicated distributor for transmitter | PH201G-A☐*C |
Utilities
| FLXA202 inductive conductivity transmitter | |
|---|---|
| Power supply voltage: | 17 - 40 V DC (from distributor) |
| PH201G distributor | |
| Power supply: | 100 V: 20 to130 V DC/80 to 138 V AC, 47 to 63 Hz |
| 220 V: 120 to 340 V DC/138 to 264 V AC, 47 to 63 Hz | |
| Power consumption: | 24 V DC: approx. 200 mA |
| 100 V AC: approx. 7 VA | |
| 220 V AC: approx. 11 VA | |
Notes
Temperature range of transmitter is -20 to 140°C
Field Data
1. Process Conditions
| Concentration (%) | Temperature (°C) | Pressure MPa | |
|---|---|---|---|
| Water | - | 4 to 20 | 0 to 1 |
| NaOH solution | 1 to 5 | 80 to 90 | 0 to 1 |
| HNO3 solution | 1 to 5 | 80 to 90 | 0 to 1 |
| Steam | - | below 130 | 0 to 1 |
2. Features of ISC Inductive Conductivity Meter used in a CIP Process
- Improved precision in boundary surface measurement.
(a) Equipped with a zero-suppression function according to output signal* Zero suppression
(b) One sensor can handle a minimum span of 100µS/cm and a maximum span of 1999 mS/cm.
Example:
Output: 4 to 20 mA DC
Range: 100 to 300 mS/cm - Steam sterilization capability
Measurements can be performed at process solution temperatures of -10 to 130°C and pressures no greater than 2 MPa {20 kgf/cm2}
Industrien
-
Chemical
Chemical plants rely on continuous and batch production processes, each posing different requirements for a control system. A continuous process calls for a robust and stable control system that will not fail and cause the shutdown of a production line, whereas the emphasis with a batch process is on having a control system that allows great flexibility in making adjustments to formulas, procedures, and the like. Both kinds of systems need to be managed in available quality history of product, and to be able to execute non-routine operations. With its extensive product portfolio, experienced systems engineers, and global sales and service network, Yokogawa has a solution for every plant process.
-
Food & Beverage
At Yokogawa, we understand that today’s food and beverage companies face unprecedented challenges in climate change, consumer demand, and increased global competitiveness. Overcoming these challenges will require innovative solutions that focus on key areas of production, asset management, and food safety and quality.
-
Specialty & Fine Chemical
Yokogawa has long served customers in the specialty and fine chemicals market. With a market leading batch solution that offers the best in class reliability and flexibility as well as industry experts who understand the complex requirements in designing a batch solution, you can be assured that in your partnership with Yokogawa you will have a system that will enable you to produce products that meet your customers’ needs in the future while maintaining safety and regulatory compliance.
Zugehörige Produkte & Lösungen
-
2-Leiter-Analysator FLXA202/21
Die Analysatoren der FLEXA-Serie werden für kontinuierliche Online-Messungen in industriellen Anlagen verwendet. Mit der Option für die Ein- oder Zwei-Sensor-Messung sind sie die flexibelsten 2-Leiter-Analysegeräte auf dem Markt.
-
2-Leiter-Messumformer/-Analysator FLXA202
Die Analysatoren der FLEXA™ Serie werden für kontinuierliche Online-Messungen in industriellen Anlagen verwendet. Mit der Option für die Ein- oder Zwei-Sensor-Messung sind sie die flexibelsten 2-Leiter-Analysegeräte auf dem Markt.
-
Induktiver (Ringsensor) Leitfähigkeitssensor ISC40
Sensoren des Modells ISC40 sind für den Einsatz mit FLEXA ISC-Analysatoren konzipiert. Diese Kombination übertrifft alle Erwartungen an Leitfähigkeitsmessungen hinsichtlich Zuverlässigkeit, Genauigkeit, Bereichsverhältnis und Preis-Leistungs-Verhältnis.
-
Mehrkanal-4-Leiter-Analysator FLXA402
Die Analysatoren der FLEXA™-Serie sind modular gestaltete Analysegeräte für kontinuierliche Online-Messungen in industriellen Anlagen. Sie ermöglichen Messungen mit einem oder mehreren Sensoren.
-
Sensoren für Reinwasser SC4A(J)/SC42
Diese Sensoren sind für Anwendungen bei niedriger Leitfähigkeit vorgesehen, wie sie in der Halbleiter- und Kraftwerksindustrie-, der Wasserwirtschaft und der Pharmabranche vorkommen; sie zeichnen sich durch eine zweckmäßige kompakte Bauform aus.
-
Leitfähigkeitssensoren
Leitfähigkeitssensoren dienen zur Messung von Leitfähigkeit, Widerstand, WIFI, prozentualer Konzentration und den gesamten gelösten Feststoffen (TSD). Anwendung finden diese Sensoren beispielsweise in Entsalzungsanlagen, der Wasseraufbereitung in Umkehrosmoseanlagen oder bei der Abschlämmung von Kesseln. Die verschiedenen Installationsoptionen schließen u. a. Wechsel-, Durchfluss- und Eintaucharmaturen sowie den direkten Einbau ein. Die richtige Auswahl von Sensoren ist für optimale Messergebnisse von entscheidender Bedeutung.
-
pH- und ORP-Analysatoren
Sensoren und Analysatoren für pH und ORP (Redox) werden zur kontinuierlichen Überwachung von pH- und ORP-Werten im Prozess eingesetzt, z.B. um die Wasser- und Produktqualität sicherzustellen oder um Abflüsse, Batch-Neutralisierung, Zellstoffbestand, Gaswäscher, Kühltürme, chemische Aufbereitung, Wasser- und Abwasserbehandlung und viele andere Anwendungen zu überwachen.