Czech CZ   
YS80 Series Auxiliary Units
Control Devices

YS80 Series Auxiliary Units

It is a highly reliable YS80 series auxiliary units with abundant operation results since its release in 1981.

Details

SHUR Case (Rack-Mounting)

SHUR Case (Rack-Mounting)

The SHUR Rack-Mounting Case is used by all YEWSERIES 80 rack-mounting instruments. This case can be ordered separately from (prior to) the plug-in instrument modules themselves, and pre-wired.

 

SDND Power Supply Unit

SDND Power Supply Unit

The SDND Power Supply Unit provides stabilized 25 V DC power for YEWSERIES 80 Instruments.

  • It features small size and light weight, and can be mounted in the same position as Rack instruments.
  • Parallel operation of SDND Power Supply Units is possible.

 

Zdroje

Reference
Recording of Temperature and Degree of Vacuum and Controlling Boilers in Pharmaceutical Manufacturing
Thumbnail
Přehled:

Mercian uses the Part 11-compliant DX200P Paperless Recorder in its pharmaceutical manufacturing works.
Aplikační listy
Temperature Compensation of Flow
Thumbnail
Přehled:

In district heating/cooling and other systems, signals from flow meters can undergo temperature compensation in a totalizer to measure usage of warm water and other quantities. Here we give an example of how to perform temperature compensation of flow using the YS1700 Single Loop Controller in place of a dedicated totalizer.
Can I use old model YS80 series SLPC and YS100 series YS170 user programs on the YS1700?
(ns-faq-ys-10008-spec)
Yes, if you convert the parameters and user programs to YS1700 format. To convert from the old model, use the YSS1000 setting software. TI 01B08A02-08EN Replacement Guide SLPC -> YS1700 User Program Conversion TI 01B08A02-07EN Replacement Guid...
I will update from the SKYD-200*A to the SKYD-200*R or *S. On the SKYD-200*A the lock up width (hysteresis) is 2% of span or less, and the dial setting sensitivity is ±5% of span, but what lock up width (hysteresis) should I set on the SKYD-200*R or *S?
(ns-faq-ys-10015-setting)
Input a simulated signal from a standard generator to the SKYD-200*A and check the voltage of the ON and OFF points of the alarm operation. Next, set the hysteresis to the data that is converted to % of *R or *S.
I’ve set up communication between an SLPC program controller and an SCMS programmable computation station. I’m thinking of replacing just the SCMS, but can I?
(ns-faq-ys-10017-select)
You should replace both the SLPC and the SCMS. Please consider setting up two communicating units of the YS1700.
How can I select models to replace the old YS80 and YS100 series with the YS1000 series?
(ns-faq-ys-10007-select)
Refer to the following materials with replacement model formats, installation and wiring, and outer dimensions. TI 01B08A02-05EN YS1000 Replacement Guide Overview, Model Conversion TI 01B08A02-06EN YS1000 Series Replacement Guide Installation and...

Downloads

Instrukční manuály
Všeobecné specifikace
Technické informace
Výkresy

Videa

Přehled produktů
YSS1000 Software Introduction
Thumbnail
Přehled:

The YSS1000 setting software (hereinafter referred to as the YSS1000) is package software to configure the functions of the YS1000 series (hereinafter referred to as the YS1000) devices. Writing and reading of parameters and user programs of the YS1000, and PID tuning and monitoring of user programs can be performed through the use of communication.

Potřebujete víc informací o lidech, technologii a řešeních?

Kontaktuje nás
Nahoru