Czech CZ   
LL1100
Produkty & Služby

LL1100 PC-based Parameter Setting Tool for US1000 (Přerušena)

Poznámka: Tento produkt se nevyrábí od

The software package that enables you to set the configuration parameters of model US1000 Digital Indicating Controller via the optical communications adapter attached on controller front panel. Parameter data upload and download, read, write and print parameters, file management, trend display, tuning functions are available.

Zdroje

Can I purchase an adapter or cable for LL100/ L200 separately?
(ns-faq-green-9094-soft)
No. LL100/LL200 has been discontinued.
A timeout error occurs during communication with the LL.
(ns-faq-green-9079-spec)
The adapter might not be attached properly, or the adapter batteries (2 x AA) may be spent. If using the UT320/321/350/351, check whether the LL parameter on the main unit is ON.
Can I extend the LL100/LL200 cable?
(ns-faq-green-9093-soft)
Yes. Use a standard USB extension cable. Note that per the USB standard you should not use an extension cable longer than 4 meters.
How long is the included cable of LL100/LL200?
(ns-faq-green-9092-soft)
2.7 meters.
Can I purchase separate cables for LL100/LL200?
(ns-faq-green-9091-soft)
No. LL100/LL200 has been discontinued.
I can't set R485 parameters for the UT320, UT321, UT350 and UT351 using the parameter setting tool.
(ns-faq-green-9103-soft)
We apologize for this. These parameters cannot be set using the tool (both terminal and front panel communications) due to the specifications of the controller main unit.
A response time out occurs during communication on the UT320, UT321, UT350, or UT351.
(ns-faq-green-9101-soft)
Check whether the LL parameter on the controller is ON. If using RS-485 communication, turn it OFF. If it is already OFF, check the following. If front panel communication, ON If rear panel communication, OFF If it is already OFF, check the following...
UT320/UT321/UT350/UT351. On the UP350/UP351, there are parameters that I can't set.
(ns-faq-green-9098-soft)
In the controller specifications, communication and LOCK parameters cannot be set with the LL100/LL200.

Downloads

Instrukční manuály

Potřebujete víc informací o lidech, technologii a řešeních?

Kontaktuje nás
Nahoru