Czech CZ   
I connected the SMARTDAC+ GM10 to a PC with a LAN cable and entered the IP address on the GM10 but I can't access the GM10 on IE.

I connected the SMARTDAC+ GM10 to a PC with a LAN cable and entered the IP address on the GM10 but I can't access the GM10 on IE.

Check the IP address of the GM10 and the PC. The network area of each must match.

Související produkty a řešení

  • Modular GM10

    SMARTDAC+TM GM10 data logger has a modular architecture that can acquire necessary data. By supporting not only I/O but also many communication protocols such as 920MHz wireless, Modbus and so on. Monitor and setting changes are available through Bluetooth. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    Viz více
Nahoru