Name: UTAdvanced UT32A-D
Brand: Yokogawa
SKU: ut32a-d

Selection Guide
FAQ
宣传彩页
使用说明书
一般规格书
常见问题
技术支持

UT32A-D是一款紧凑型数字指示控制器，带可选的2回路控制，还包括梯形图顺控功能。

^{CSA C22.2 61010-/1

UL61010-1}
DIN导轨安装型控制器获得CE认证。

特性

先进控制

梯形图顺序控制
模糊逻辑控制器

简单性

易读的14段大型彩色LCD显示屏
参数的文本滚动功能
导航指南和导航键
可编程功能键
用户可设置的默认值
支持多语言(英语、西班牙语、法语、德语)
65 mm深的紧凑设计

网络

RS-485 (Modbus/RTU、仪表间通信、协调运转、PC-Link)

可靠性

3年保修期*1
RoHS/WEEE
NEMA4*2/IP66前面板

*1: 3年保修期为出厂后的36个月。
*2: 只软管测试应用

软件

LL50A参数设定软件带梯形图程序构建功能(另售)
可提供面板和DIN导轨安装型。

^{CSA C22.2 61010-/1

UL61010-1}
DIN导轨安装型控制器获得CE认证。

【Support Information】List of RoHS

This is a list of recorder and controller products that support the RoHS (2011/65/EU) directive.

更多

应用

Easily Adding Messages to Manufacturing Data Using the Touch Panel

常见问题

I'm editing a CC-Link communication profile on the LL50A. I want to add the UT32A-D type to the RS485 communication line, but the PV2 register symbol doesn't appear.

(ns-faq-ut-2168-setting)

常见问题

Even when I turn ON the power, nothing appears on the UT display.

(ns-faq-ut-2013-setting)

常见问题

Can you tell me the procedure for assignment when the heater break alarm output option (suffix code /HA) is installed?

(ns-faq-ut-2015-setting)

常见问题

I can't find a parameter I want to set.

(ns-faq-ut-2001-setting)

常见问题

I set up a difference lower limit alarm, but no alarm is output.

(ns-faq-ut-2017-setting)

常见问题

With the UTAdvanced ladder program function, can I use constants and other parameters in basic math functions?

(ns-faq-ut-2024-connect)

常见问题

Are communications with the FA-M3 possible?

(ns-faq-ut-2021-connect)

常见问题

Can I use an RS-485 communication program written for the GREEN series (UT300/UT400/UT500/UP300/UP500/UM300) on a UT-Advanced series instrument?

(ns-faq-ut-2025-connect)

常见问题

When using the LL50A to create ladder programs, which ladder program edit mode should I use: "input ladder calculation," "output ladder calculation," or "user ladder"?

(ns-faq-ut-2030-program)

常见问题

I'm creating ladder programs on the LL50A. I want to set input computed results to R.SP, but I see lots of digits are displayed after the decimal point of the data on the ladder monitor. Can I reduce the number of digits displayed after the decimal point?

(ns-faq-ut-2031-program)

常见问题

Can I use analog input in computations?

(ns-faq-ut-2032-program)

常见问题

Can I rewrite constants used in ladder programs via communication?

(ns-faq-ut-2033-program)

常见问题

Can I disable ladder programs that I used?

(ns-faq-ut-2034-setting)

常见问题

Can I detect when the power is turned ON?

(ns-faq-ut-2035-program)

常见问题

My LL50A ladder program monitor does not start.

(ns-faq-ut-2036-program)

常见问题

A ladder program that I wrote doesn't work properly.

(ns-faq-ut-2037-program)

常见问题

My ladder program's comparison commands don't work properly.

(ns-faq-ut-2038-program)

常见问题

When using contact input in ladder programs, is it necessary to turn OFF the contact function assigned to the setup parameters?

(ns-faq-ut-2039-program)

常见问题

Can you tell me how to wire and set up waste liquid pH control?

(ns-faq-ut-2041-setting)

常见问题

I'm controlling the temperature of an electric furnace using a thyristor. How should I wire and configure this?

(ns-faq-ut-2042-setting)

常见问题

I'm controlling the temperature of an electric furnace using solid state relays. How should I wire and configure this?

(ns-faq-ut-2043-setting)

常见问题

Can you tell me how to wire and set up flow control using an inverter?

(ns-faq-ut-2044-setting)

常见问题

I'm controlling tank level ON/OFF. How should I wire and configure this?

(ns-faq-ut-2045-setting)

常见问题

I'm doing proportional control of tank level. How should I wire and configure this?

(ns-faq-ut-2046-setting)

常见问题

I'm controlling tank pressure. How should I wire and configure this?

(ns-faq-ut-2047-setting)

常见问题

With the LL50A and UTAdvanced, can I perform RS-485 communications without a dedicated cable?

(ns-faq-ut-2051-connect)

常见问题

How can I display parameters that aren't displayed in the LL50A parameter setting software?

(ns-faq-ut-2052-soft)

常见问题

Can I acquire trend data on the LL50A?

(ns-faq-ut-2053-soft)

常见问题

Can I switch scaling using contact input?

(ns-faq-ut-2054-program)

常见问题

What is the resolution of control output (4–20 mADC)?

(ns-faq-ut-2055-spec)

常见问题

I'm controlling tank temperature. How should I wire and configure this?

(ns-faq-ut-2048-setting)

常见问题

I'm controlling furnace temperature with a motorized valve. How should I wire and configure this?

(ns-faq-ut-2049-setting)

常见问题

I'm controlling temperature with a heat exchanger. How should I wire and configure this?

(ns-faq-ut-2050-setting)

常见问题

To cause setpoints (SP) to change at a fixed rate, I set the SP ramp up and down parameters (UPR and DNR). Is this function still enabled when changing the SP value through remote input (RSP)?

(ns-faq-ut-2058-spec)

常见问题

Are all COM terminals for contact input connected internally?

(ns-faq-ut-2061-spec)

常见问题

Is there an easy way to change the settings for alarms 1 and 2?

(ns-faq-ut-2062-spec)

常见问题

Can I reverse the 4–20 mA control output and change to a 20–4 mA signal?

(ns-faq-ut-2063-spec)

常见问题

How can I enter initial settings?

(ns-faq-ut-2064-setting)

常见问题

OVER was displayed on the PV (measured value) display. How will the control output operate in this case?

(ns-faq-ut-2070-spec)

常见问题

I initialized the controller, but no control output value is output.

(ns-faq-ut-2074-setting)

常见问题

B.OUT was displayed on the PV (measured value) display. What could be the cause of this?

(ns-faq-ut-2077-connect)

常见问题

There are differences between PV display values and the displays of other measuring instruments. Can I correct these?

(ns-faq-ut-2078-spec)

常见问题

An error occurs with position-proportional type automatic valve position adjustment (V.AT).

(ns-faq-ut-2083-setting)

常见问题

Is a terminal cover included?

(ns-faq-ut-2088-select)

常见问题

Can I set the PV display to -100 with 20 mA input, and to 0 with 4 mA input?

(ns-faq-ut-2089-setting)

常见问题

Can I switch the temperature units between°C and °F?

(ns-faq-ut-2087-spec)

常见问题

I'm trying to switch the PID number with DI input but it's not working correctly. To check, I'm looking at the green numbers in the upper left of the SP display.

(ns-faq-ut-2090-spec)

常见问题

Do you have a 48 x 96 sized controller that supports CC-Link?

(ns-faq-ut-2091-select)

常见问题

I perform auto-tuning on the UT, but the auto-tuning parameters (AT) do not appear.

(ns-faq-ut-2094-setting)

常见问题

I purchased a UT with the communication function, but currently I'm not using the communication function. I haven't even wired communication, but the blinking SP decimal point of a communication error appears. Why is that?

(ns-faq-ut-2096-connect)

常见问题

Up to how many SSRs can be connected to the UT?

(ns-faq-ut-2097-spec)

常见问题

I'm perform auto-tuning on the UT. At about how much relative to the set point does the output switch?

(ns-faq-ut-2099-spec)

常见问题

I want to check the currently used PID settings.

(ns-faq-ut-2102-setting)

常见问题

I'm doing temperature control. I did PID tuning, but the overshoots are still large and I want to suppress them. Is there a good way to do this?

(ns-faq-ut-2104-setting)

常见问题

I'm replacing my GREEN series with the UTAdvanced series. Is there anything I need to be careful of in terms of wiring?

(ns-faq-ut-2108-connect)

常见问题

If I switch the SP number will the PID number switch too?

(ns-faq-ut-2109-spec)

常见问题

Does the alarm function work when operation is stopped (STOP)?

(ns-faq-ut-2110-spec)

常见问题

What is the alarm standby function?

(ns-faq-ut-2111-spec)

常见问题

Are the control and alarm hysteresis values set as percentages?

(ns-faq-ut-2113-setting)

常见问题

I'm using the UP35A and UP55A. Are PV and local event hysteresis values set with percentages?

(ns-faq-ut-2114-setting)

常见问题

How can I check the RS485 communication status?

(ns-faq-ut-2116-connect)

常见问题

I want to set the PID, output limiter, and hysteresis for each SP number.

(ns-faq-ut-2120-setting)

常见问题

What is the minimum hold time that contact input can detect?

(ns-faq-ut-2121-spec)

常见问题

Why are PID parameters set with relay output?

(ns-faq-ut-2123-spec)

常见问题

Does the UTAdvanced series support CCC and GB standards? Can it be used in China?

(ns-faq-ut-2124-spec)

常见问题

Can the alarm operation be disabled during operation stop (STOP) or manual operation (MAN)?

(ns-faq-ut-2129-setting)

常见问题

I want to stop the lamp indicator or action for unused alarms.

(ns-faq-ut-2136-setting)

常见问题

Can I assign heater disconnection alarm 1 to alarm 1 output (terminal no. 108-109)?

(ns-faq-ut-2137-setting)

常见问题

Is there a limit on the number of times you can write to the D register via communication?

(ns-faq-ut-2140-spec)

常见问题

What should I do if DI input is not accepted on relay contacts?

(ns-faq-ut-2141-spec)

常见问题

Can I remove the output limit value restriction during manual operation?

(ns-faq-ut-2143-setting)

常见问题

When I start operation (RUN), control output doesn't change.

(ns-faq-ut-2144-setting)

常见问题

When I change from STOP to RUN the control output overshoot becomes large. What can I do about that? There is no problem with PID tuning.

(ns-faq-ut-2145-setting)

常见问题

I'm controlling temperature by using voltage pulse output to operate a heater with an SSR, but I can't stop the hunting. I already performed auto-tuning.

(ns-faq-ut-2146-setting)

常见问题

Valve calibration parameters don't appear on position proportional controllers.

(ns-faq-ut-2147-setting)

常见问题

I am connecting the UT and Mitsubishi's touch panel GOT using RS-485 communication. Which communication protocol should I choose?

(ns-faq-ut-2152-setting)

常见问题

I'm controlling pressure. Are there PID reference values?

(ns-faq-ut-2153-setting)

常见问题

I'm controlling flow. Are there PID reference values?

(ns-faq-ut-2154-setting)

常见问题

I'm controlling flue levels. Are there PID reference values?

(ns-faq-ut-2155-setting)

常见问题

With 1-5 VDC input, can I make the PV display 0.00 to -10.00 kPa?

(ns-faq-ut-2156-setting)

常见问题

I just purchased the UT and UM and the EV lamp turned ON. What does that mean?

(ns-faq-ut-2157-setting)

常见问题

I want to create a ladder program that writes output tracking values via communication.

(ns-faq-ut-2158-setting)

常见问题

I'm using a thermocouple for the input, but "b.out" appears on the PV display. What should I check first?

(ns-faq-ut-2160-other)

常见问题

Can you tell me the inrush current value of the UTA series of instrument power?

(ns-faq-ut-2162-spec)

常见问题

Can you tell me how to get the measurement accuracy when measuring 0 to 1000°C with a type K thermocouple? I selected input type K2 (-270.0 to 1000.0).

(ns-faq-ut-2163-spec)

常见问题

I purchased a DIN rail mount UTAdvanced series, but how should I configure it?

(ns-faq-ut-2165-spec)

常见问题

What is the measured current during RTD input?

(ns-faq-ut-2167-spec)

常见问题

I'm pressing SET/ENTER on the front panel keys but I can't change the SP value.

(ns-faq-ut-2171-setting)

常见问题

I want to add 10-segment linearizers to the UT control output value. Can the broken line output result be read via communication?

(ns-faq-ut-2176-spec)

常见问题

I set the UTA output to 10-segment linearizer approximation. Can the resulting output values be read via communication?

(ns-faq-ut-2177-spec)

常见问题

Can I use square root extraction on measured input?

(ns-faq-ut-2183-spec)

常见问题

Can I make it display the alarm type when an alarm occurs?

(ns-faq-ut-2184-spec)

常见问题

What is the MR (manual reset) function?

(ns-faq-ut-2185-spec)

常见问题

How to connect one UT with CC-Link communication to another downstream UT via RS485. The RS485 communication terminal of the UT with CC-Link communication is a 2-wire system, and that of the other UT is a 4-wire system.

(ns-faq-ut-2187-connect)

常见问题

I want to control the temperature of 3 zones. How should I configure it?

(ns-faq-ut-2191-select)

常见问题

I purchased a general type of controller. Can this control cooling?

(ns-faq-ut-2194-other)

常见问题

I want to check the suffix code but I can't see the name plate. Is there another way to check it?

(ns-faq-ut-2195-setting)

常见问题

After converting the controller manual output value to a number like the SP, can I finalize it with the ENT key?

(ns-faq-ut-2196-setting)

常见问题

I'm using the Pt100 sensor. The PV input type IN parameters include PT1, PT2, and PT3, but which should I select?

(ns-faq-ut-2197-setting)

常见问题

Can I apply a 24 VDC voltage to a contact input?

(ns-faq-ut-2198-spec)

常见问题

I want to output the results of calculations by ladder programs with 4-20 mA on the OUT output terminal, but nothing happens.

(ns-faq-ut-2207-program)

常见问题

I want to output the results of calculations by ladder programs with 4-20 mA on the RET output terminal, but nothing happens.

(ns-faq-ut-2208-program)

常见问题

I want to output the results of calculations by ladder programs with 4-20 mA on the OUT2 output terminal, but nothing happens.

(ns-faq-ut-2209-program)

常见问题

Is the SP slope valid for remote SP values as well?

(ns-faq-ut-2210-spec)

常见问题

I want to contol pressure and temperature with a single pattern using the UP and UT.

(ns-faq-ut-2213-spec)

常见问题

When installing the UTAdvanced series, what is the depth in millimeters from the surface of the panel?

(ns-faq-ut-2214-spec)

常见问题

Can I use DO to transmit the SP number currently used on the UT to an external device?

(ns-faq-ut-2215-setting)

常见问题

Can I switch heating and cooling control?

(ns-faq-ut-2218-spec)

常见问题

Can I connect multiple instruments such as power controllers to a controller's analog current output?

(ns-faq-ut-2219-connect)

常见问题

I’ve coordinated operation between 2 UT's via RS485 communication. I want to compensate the SP value of the child UT but is that possible?

(ns-faq-ut-2224-setting)

常见问题

I wrote the alarm setting values from the UT350 to the UT35A via communication. On the UT350, the alarm setting values were common from 1SP through 4SP, but when updating to the UT35A, what should I do?

(ns-faq-ut-2231-spec)

常见问题

Do you sell terminal covers?

(ns-faq-ut-2233-other)

常见问题

To prevent mis-operation, is there a setting where you hold down the A/M button to switch the operation?

(ns-faq-ut-2240-setting)

常见问题

Can I set it for 1 shot-only event display and contact output ON when an alarm activates?

(ns-faq-ut-2241-setting)

常见问题

Is it possible to connect multiple contact inputs to a single relay contact?

(ns-faq-ut-2243-connect)

常见问题

Can I choose the color of the UTAdvanced terminal cover?

(ns-faq-ut-2246-spec)

常见问题

Is the current transformer for heater current measurement that is used by UTAdvanced made by Yokogawa Electric?

(ns-faq-ut-2247-other)

常见问题

What is the model of the current transformer for heater current measurement used by UTAdvanced?

(ns-faq-ut-2248-spec)

常见问题

How can I display the currently used PID no. on the operation screen?

(ns-faq-ut-2249-setting)

常见问题

Can I set control for power fail recovery to MAN?

(ns-faq-ut-2117-setting)

宣传彩页

UTAdvanced数字指示调节器 (5.6 MB)

使用说明书

一般规格书

软件说明

LL50A Parameter Setting Software *Log-in Required

产品图示

想要了解更多的信息，技术&解决方案？

联系我们

UTAdvanced UT32A-D

概述

特性

先进控制

简单性

网络

可靠性

软件

详细介绍

【Support Information】List of RoHS

参考

下载

宣传彩页

使用说明书

一般规格书

软件说明

产品图示