Name: UTAdvanced UP55A
Brand: Yokogawa
SKU: up55a

UP55A是一款新发布的1/4 DIN尺寸程序控制器，可以提供多达30种程序模式，并且可以同时监测8个PV事件、16个时间事件和8个报警。同时，标配还包括梯形图顺控功能。

概述

UP55A是一款新发布的1/4 DIN尺寸程序控制器，可以提供多达30种程序模式，并且可以同时监测8个PV事件、16个时间事件和8个报警。

先进控制

5个内置控制功能和算法
梯形图顺序控制
模糊逻辑控制

简易性

易读的14段大型彩色LCD显示屏
参数的文本滚动功能
导航提示和导航键
编程功能键
用户可设置的默认值
支持多语言(英语、西班牙语、法语、德语)
65 mm深的紧凑设计

网络

以太网(Modbus/TCP)
RS-485 (Modbus/RTU、仪表间通信、协调运转、PC-Link)
开放网络(PROFIBUS-DP、CC-Link、DeviceNet)

可靠性

3年保修^*1
RoHS/WEEE
NEMA4^*2/IP56前面板

应用软件

带梯形图构建功能的LL50A 参数设定软件(单独销售)

*1: 3年保修期为出厂后36个月。
*2: 只经过软管测试。

【Support Information】List of RoHS

This is a list of recorder and controller products that support the RoHS (2011/65/EU) directive.

更多
【Support Information】UTAdvanced Series Parameter Maps and Lists

UTAdvanced series Parameter map list for each model can be downloaded.
Please use it to manage and save the set parameters. Also please use it as a reference for the key operation at that time.

更多
【Support Information】New Legislative Framework (NLF) Conforming Products

This is a list of recorder and controller products that support the New Legislative Framework (NLF.)

更多

成功案例

Control of Heat Treating Furnace Operation

应用

Controlling a pharmaceutical sterilizer/pasteurizer

常见问题

The UP55A program controller comes standard with 8 contact input (DI) terminals, but I only know 3 of the terminal numbers.What are the other 5 terminal numbers?

(ns-faq-ut-2071-connect)

常见问题

At the end of UP32A/UP35A/UP55A programs, does the PIDNo. change when local is set (JC=LOCAL)?

(ns-faq-ut-2079-spec)

常见问题

How do I set up output of alarm output 1 from the UP32A/UP35A/UP55A AL1 terminals (relay contact output)?

(ns-faq-ut-2082-setting)

常见问题

I want to check the program controller patterns from the main unit.

(ns-faq-ut-2122-setting)

常见问题

With a program controller, if you don't turn ON the wait function on/off 1–5 setting (parameter WT.SW1–WT.SW5), does the wait function not operate?

(ns-faq-ut-2127-spec)

常见问题

With program controllers, can you do auto-tuning while programs are running?

(ns-faq-ut-2128-setting)

常见问题

With program controllers, can you change the SP while programs are running?

(ns-faq-ut-2133-setting)

常见问题

On a program controller, can I do contact output when an operation parameter ends?

(ns-faq-ut-2134-setting)

常见问题

While a program is running, I want to judge advancing to the next segment with an operator. How can I do that?

(ns-faq-ut-2142-setting)

常见问题

I use the UP under batch control. I want to display a message on the front panel of the UP after batch control stops.

(ns-faq-ut-2169-setting)

常见问题

How can I delete a segment from a UP program pattern through CC-Link communication?

(ns-faq-ut-2189-setting)

常见问题

I want to write program patterns to the UP Program Controller via communications, but can I do that while the UP is running a program?

(ns-faq-ut-2201-connect)

常见问题

Can I use DO to transmit the pattern number currently used on the UP to an external device?

(ns-faq-ut-2216-setting)

常见问题

Is remote input required on the cascade primary controller when performing cascade control with two controllers?

(ns-faq-ut-2118-setting)

常见问题

When switching input with 2-input switching control, doesn't the control output suddenly change (bump)?

(ns-faq-ut-2057-spec)

常见问题

I want to use 2 communication systems.

(ns-faq-ut-2085-select)

常见问题

With the UT55A, UT75A, and UP55A, is there a difference between selecting RS485 communication with the 2nd digit of thesuffix code versus the 3rd digit?

(ns-faq-ut-2086-select)

常见问题

I'm doing cascade control. How do I do auto-tuning?

(ns-faq-ut-2103-setting)

常见问题

Are there controllers that can output 2 alarm relay contacts with the c contact?

(ns-faq-ut-2106-select)

常见问题

With loop control with PV switching or PV auto-selector, can I apply independent correction on each individual input?

(ns-faq-ut-2172-setting)

常见问题

With loop control with PV switching or PV auto-selector, can I set alarms individually for analog values acquired on each input?

(ns-faq-ut-2173-setting)

常见问题

Can I use a low cut on the PV (measured value input)?

(ns-faq-ut-2186-spec)

常见问题

I want to display he volume of a spherical tank, but is there a function that can do that?

(ns-faq-ut-2192-spec)

常见问题

I want to perform cascade control of 2 temperature inputs on a single unit. Is there a model that can do that?

(ns-faq-ut-2193-select)

常见问题

Is there a model that can have 2 ports of RS485 communication?

(ns-faq-ut-2223-select)

常见问题

What happens to the alarm setting values when you switch from local SP to remote SP?

(ns-faq-ut-2126-spec)

常见问题

Can I toggle between remote and local by pressing a key?

(ns-faq-ut-2131-setting)

常见问题

I want to convert my old controller (GREEN series) parameter data for the UTAdvanced series. Is there a program for that?

(ns-faq-ut-2222-soft)

常见问题

I used the parameter conversion tool to convert GREEN series data for the UTA series. I can’t add the CC-Link communication option code to the converted data.

(ns-faq-ut-2230-spec)

常见问题

Can I set control for power fail recovery to MAN?

(ns-faq-ut-2117-setting)

常见问题

I want to wire a 2-wire transmitter and a 24 VDC sensor power supply.

(ns-faq-ut-2119-connect)

常见问题

Can you tell me the procedure for assignment when the heater break alarm output option (suffix code /HA) is installed?

(ns-faq-ut-2015-setting)

常见问题

Can I set up 4 alarm relay outputs?

(ns-faq-ut-2016-setting)

常见问题

With the types that have an Ethernet communication function, even if I set the Ethernet setting switch to "1," it reverts to "0."

(ns-faq-ut-2022-connect)

常见问题

After changing the UT's SP values from the MELSEC via CC-Link, when I change the SP value on the UT main unit, I can't change to the same value as before from the MELSEC.

(ns-faq-ut-2026-connect)

常见问题

With CC-Link, I write 1 to RY48 and change to MAN, and then change to AUTO using the main unit A/M key. Can you tell me how to change back to MAN again via CC-Link?

(ns-faq-ut-2027-connect)

常见问题

What profile number is used when using CC-Link on only 1 unit?

(ns-faq-ut-2028-connect)

常见问题

Can I switch between RUN and STOP via CC-Link?

(ns-faq-ut-2029-connect)

常见问题

To use valve opening in a position proportional type UT ladder program, which register should I reference?

(ns-faq-ut-2040-program)

常见问题

Can I output an alarm (close the alarm terminal) on a power failure?

(ns-faq-ut-2056-setting)

常见问题

Is calibration of position still required if the position proportional type feedback input is current?

(ns-faq-ut-2059-spec)

常见问题

Can I change the temperature controller profile information for CC-Link communication?

(ns-faq-ut-2068-spec)

常见问题

What is the Modbus master function that is added when CC-Link communication is installed?

(ns-faq-ut-2069-spec)

常见问题

What happens to transmission output when an input OVER occurs at 4–20 mA input (PV: 4–20 mA)?

(ns-faq-ut-2081-setting)

常见问题

I connect multiple UTs as CC-Link slaves. How should I assign PLC CPU registers?

(ns-faq-ut-2092-connect)

常见问题

Is there a C contact with alarm contact output?

(ns-faq-ut-2112-spec)

常见问题

Can you describe the register symbols in the profiles for open network communication?

(ns-faq-ut-2115-term)

常见问题

Can a UT100 series instrument be connected downstream of a UTAdvanced series with CC-Link communications?

(ns-faq-ut-2125-spec)

常见问题

Can I connect transmission output (current output) to a voltage input meter?

(ns-faq-ut-2135-setting)

常见问题

I'm writing PID settings via CC-Link communication, but when I send 100 to proportional band P, 10.0 appears on the main unit.

(ns-faq-ut-2138-setting)

常见问题

b.out was displayed on the controller's PV display. What does that mean?

(ns-faq-ut-2148-spec)

常见问题

Can I read a valve opening value via communication on a position proportional controller?

(ns-faq-ut-2159-spec)

常见问题

Which station type should I select for the UTAdvanced series for CC-Link communication: Remote I/O, Remote Device, or Intelligent Device?

(ns-faq-ut-2164-setting)

常见问题

I purchased a unit with CC-Link communication. I'm setting up the parameters for CC-Link, and there are 2 communication speed settings, BR and BPS. Which setting should I use?

(ns-faq-ut-2166-setting)

常见问题

Sometimes data can't be written to the "1.SP" register via CC-Link communication. What causes this?

(ns-faq-ut-2178-spec)

常见问题

Sometimes with CC-Link communication it stops writing data. What should I do?

(ns-faq-ut-2180-spec)

常见问题

What happens if I write data outside the specified range via CC-Link communication?

(ns-faq-ut-2181-spec)

常见问题

Is there support for the "CC-Link IE" standard?

(ns-faq-ut-2182-spec)

常见问题

I want to perform autotuning via communication on a UT with CC-Link communication. Should I turn AT_L1 which is assigned to the OUT area in the profile to ON (=write 1)?

(ns-faq-ut-2175-program)

常见问题

Downstream from a UT with CC-Link communication (the Modbus master), the power to a controller connected via RS485 communication (the Modbus slave) went out. After the power to the controller was restored, communication did not restart. What should I do?

(ns-faq-ut-2179-spec)

常见问题

Is the SP slope valid for remote SP values as well?

(ns-faq-ut-2210-spec)

常见问题

I have the /LP option and I’m wiring a 2 wire transmitter power supply. How can I input a simulated current signal?

(ns-faq-ut-2239-connect)

常见问题

What is the model of the current transformer for heater current measurement used by UTAdvanced?

(ns-faq-ut-2248-spec)

常见问题

How can I display the currently used PID no. on the operation screen?

(ns-faq-ut-2249-setting)

常见问题

Even when I turn ON the power, nothing appears on the UT display.

(ns-faq-ut-2013-setting)

常见问题

I can't find a parameter I want to set.

(ns-faq-ut-2001-setting)

常见问题

I set up a difference lower limit alarm, but no alarm is output.

(ns-faq-ut-2017-setting)

常见问题

With the UTAdvanced ladder program function, can I use constants and other parameters in basic math functions?

(ns-faq-ut-2024-connect)

常见问题

Are communications with the FA-M3 possible?

(ns-faq-ut-2021-connect)

常见问题

Can I use an RS-485 communication program written for the GREEN series (UT300/UT400/UT500/UP300/UP500/UM300) on a UT-Advanced series instrument?

(ns-faq-ut-2025-connect)

常见问题

When using the LL50A to create ladder programs, which ladder program edit mode should I use: "input ladder calculation," "output ladder calculation," or "user ladder"?

(ns-faq-ut-2030-program)

常见问题

I'm creating ladder programs on the LL50A. I want to set input computed results to R.SP, but I see lots of digits are displayed after the decimal point of the data on the ladder monitor. Can I reduce the number of digits displayed after the decimal point?

(ns-faq-ut-2031-program)

常见问题

Can I use analog input in computations?

(ns-faq-ut-2032-program)

常见问题

Can I rewrite constants used in ladder programs via communication?

(ns-faq-ut-2033-program)

常见问题

Can I disable ladder programs that I used?

(ns-faq-ut-2034-setting)

常见问题

Can I detect when the power is turned ON?

(ns-faq-ut-2035-program)

常见问题

My LL50A ladder program monitor does not start.

(ns-faq-ut-2036-program)

常见问题

A ladder program that I wrote doesn't work properly.

(ns-faq-ut-2037-program)

常见问题

My ladder program's comparison commands don't work properly.

(ns-faq-ut-2038-program)

常见问题

When using contact input in ladder programs, is it necessary to turn OFF the contact function assigned to the setup parameters?

(ns-faq-ut-2039-program)

常见问题

Can you tell me how to wire and set up waste liquid pH control?

(ns-faq-ut-2041-setting)

常见问题

I'm controlling the temperature of an electric furnace using a thyristor. How should I wire and configure this?

(ns-faq-ut-2042-setting)

常见问题

I'm controlling the temperature of an electric furnace using solid state relays. How should I wire and configure this?

(ns-faq-ut-2043-setting)

常见问题

Can you tell me how to wire and set up flow control using an inverter?

(ns-faq-ut-2044-setting)

常见问题

I'm controlling tank level ON/OFF. How should I wire and configure this?

(ns-faq-ut-2045-setting)

常见问题

I'm doing proportional control of tank level. How should I wire and configure this?

(ns-faq-ut-2046-setting)

常见问题

I'm controlling tank pressure. How should I wire and configure this?

(ns-faq-ut-2047-setting)

常见问题

With the LL50A and UTAdvanced, can I perform RS-485 communications without a dedicated cable?

(ns-faq-ut-2051-connect)

常见问题

How can I display parameters that aren't displayed in the LL50A parameter setting software?

(ns-faq-ut-2052-soft)

常见问题

Can I acquire trend data on the LL50A?

(ns-faq-ut-2053-soft)

常见问题

Can I switch scaling using contact input?

(ns-faq-ut-2054-program)

常见问题

What is the resolution of control output (4–20 mADC)?

(ns-faq-ut-2055-spec)

常见问题

I'm controlling tank temperature. How should I wire and configure this?

(ns-faq-ut-2048-setting)

常见问题

I'm controlling furnace temperature with a motorized valve. How should I wire and configure this?

(ns-faq-ut-2049-setting)

常见问题

I'm controlling temperature with a heat exchanger. How should I wire and configure this?

(ns-faq-ut-2050-setting)

常见问题

Are all COM terminals for contact input connected internally?

(ns-faq-ut-2061-spec)

常见问题

Can I reverse the 4–20 mA control output and change to a 20–4 mA signal?

(ns-faq-ut-2063-spec)

常见问题

How can I enter initial settings?

(ns-faq-ut-2064-setting)

常见问题

OVER was displayed on the PV (measured value) display. How will the control output operate in this case?

(ns-faq-ut-2070-spec)

常见问题

I initialized the controller, but no control output value is output.

(ns-faq-ut-2074-setting)

常见问题

B.OUT was displayed on the PV (measured value) display. What could be the cause of this?

(ns-faq-ut-2077-connect)

常见问题

There are differences between PV display values and the displays of other measuring instruments. Can I correct these?

(ns-faq-ut-2078-spec)

常见问题

An error occurs with position-proportional type automatic valve position adjustment (V.AT).

(ns-faq-ut-2083-setting)

常见问题

Is a terminal cover included?

(ns-faq-ut-2088-select)

常见问题

Can I set the PV display to -100 with 20 mA input, and to 0 with 4 mA input?

(ns-faq-ut-2089-setting)

常见问题

Can I switch the temperature units between°C and °F?

(ns-faq-ut-2087-spec)

常见问题

I'm doing temperature control. I did PID tuning, but the overshoots are still large and I want to suppress them. Is there a good way to do this?

(ns-faq-ut-2104-setting)

常见问题

I'm replacing my GREEN series with the UTAdvanced series. Is there anything I need to be careful of in terms of wiring?

(ns-faq-ut-2108-connect)

常见问题

Does the alarm function work when operation is stopped (STOP)?

(ns-faq-ut-2110-spec)

常见问题

What is the alarm standby function?

(ns-faq-ut-2111-spec)

常见问题

Are the control and alarm hysteresis values set as percentages?

(ns-faq-ut-2113-setting)

常见问题

I'm using the UP35A and UP55A. Are PV and local event hysteresis values set with percentages?

(ns-faq-ut-2114-setting)

常见问题

How can I check the RS485 communication status?

(ns-faq-ut-2116-connect)

常见问题

I want to set the PID, output limiter, and hysteresis for each SP number.

(ns-faq-ut-2120-setting)

常见问题

What is the minimum hold time that contact input can detect?

(ns-faq-ut-2121-spec)

常见问题

Why are PID parameters set with relay output?

(ns-faq-ut-2123-spec)

常见问题

Does the UTAdvanced series support CCC and GB standards? Can it be used in China?

(ns-faq-ut-2124-spec)

常见问题

Can the alarm operation be disabled during operation stop (STOP) or manual operation (MAN)?

(ns-faq-ut-2129-setting)

常见问题

I want to stop the lamp indicator or action for unused alarms.

(ns-faq-ut-2136-setting)

常见问题

Can I assign heater disconnection alarm 1 to alarm 1 output (terminal no. 108-109)?

(ns-faq-ut-2137-setting)

常见问题

Is there a limit on the number of times you can write to the D register via communication?

(ns-faq-ut-2140-spec)

常见问题

What should I do if DI input is not accepted on relay contacts?

(ns-faq-ut-2141-spec)

常见问题

Can I remove the output limit value restriction during manual operation?

(ns-faq-ut-2143-setting)

常见问题

I'm controlling temperature by using voltage pulse output to operate a heater with an SSR, but I can't stop the hunting. I already performed auto-tuning.

(ns-faq-ut-2146-setting)

常见问题

Valve calibration parameters don't appear on position proportional controllers.

(ns-faq-ut-2147-setting)

常见问题

I'm controlling pressure. Are there PID reference values?

(ns-faq-ut-2153-setting)

常见问题

I'm controlling flow. Are there PID reference values?

(ns-faq-ut-2154-setting)

常见问题

I'm controlling flue levels. Are there PID reference values?

(ns-faq-ut-2155-setting)

常见问题

With 1-5 VDC input, can I make the PV display 0.00 to -10.00 kPa?

(ns-faq-ut-2156-setting)

常见问题

I want to create a ladder program that writes output tracking values via communication.

(ns-faq-ut-2158-setting)

常见问题

I'm using a thermocouple for the input, but "b.out" appears on the PV display. What should I check first?

(ns-faq-ut-2160-other)

常见问题

Can you tell me the inrush current value of the UTA series of instrument power?

(ns-faq-ut-2162-spec)

常见问题

Can you tell me how to get the measurement accuracy when measuring 0 to 1000°C with a type K thermocouple? I selected input type K2 (-270.0 to 1000.0).

(ns-faq-ut-2163-spec)

常见问题

What is the measured current during RTD input?

(ns-faq-ut-2167-spec)

常见问题

I'm pressing SET/ENTER on the front panel keys but I can't change the SP value.

(ns-faq-ut-2171-setting)

常见问题

I set the UTA output to 10-segment linearizer approximation. Can the resulting output values be read via communication?

(ns-faq-ut-2177-spec)

常见问题

Can I make it display the alarm type when an alarm occurs?

(ns-faq-ut-2184-spec)

常见问题

What is the MR (manual reset) function?

(ns-faq-ut-2185-spec)

常见问题

How to connect one UT with CC-Link communication to another downstream UT via RS485. The RS485 communication terminal of the UT with CC-Link communication is a 2-wire system, and that of the other UT is a 4-wire system.

(ns-faq-ut-2187-connect)

常见问题

I want to control the temperature of 3 zones. How should I configure it?

(ns-faq-ut-2191-select)

常见问题

I purchased a general type of controller. Can this control cooling?

(ns-faq-ut-2194-other)

常见问题

I want to check the suffix code but I can't see the name plate. Is there another way to check it?

(ns-faq-ut-2195-setting)

常见问题

After converting the controller manual output value to a number like the SP, can I finalize it with the ENT key?

(ns-faq-ut-2196-setting)

常见问题

I'm using the Pt100 sensor. The PV input type IN parameters include PT1, PT2, and PT3, but which should I select?

(ns-faq-ut-2197-setting)

常见问题

Can I apply a 24 VDC voltage to a contact input?

(ns-faq-ut-2198-spec)

常见问题

I want to output the results of calculations by ladder programs with 4-20 mA on the OUT output terminal, but nothing happens.

(ns-faq-ut-2207-program)

常见问题

I want to output the results of calculations by ladder programs with 4-20 mA on the RET output terminal, but nothing happens.

(ns-faq-ut-2208-program)

常见问题

I want to output the results of calculations by ladder programs with 4-20 mA on the OUT2 output terminal, but nothing happens.

(ns-faq-ut-2209-program)

常见问题

I want to contol pressure and temperature with a single pattern using the UP and UT.

(ns-faq-ut-2213-spec)

常见问题

When installing the UTAdvanced series, what is the depth in millimeters from the surface of the panel?

(ns-faq-ut-2214-spec)

常见问题

Can I switch heating and cooling control?

(ns-faq-ut-2218-spec)

常见问题

Can I connect multiple instruments such as power controllers to a controller's analog current output?

(ns-faq-ut-2219-connect)

常见问题

Do you sell terminal covers?

(ns-faq-ut-2233-other)

常见问题

Can I set it for 1 shot-only event display and contact output ON when an alarm activates?

(ns-faq-ut-2241-setting)

常见问题

Is it possible to connect multiple contact inputs to a single relay contact?

(ns-faq-ut-2243-connect)

常见问题

Can I choose the color of the UTAdvanced terminal cover?

(ns-faq-ut-2246-spec)

常见问题

Is the current transformer for heater current measurement that is used by UTAdvanced made by Yokogawa Electric?

(ns-faq-ut-2247-other)

常见问题

Can you tell me where to download catalogs, specifications, user manuals, technical information, drawings, software, and CAD data?

(ns-faq-gxgp-097-other)

宣传彩页

UTAdvanced数字指示调节器 (5.6 MB)
Digital Indicating Controller UTAdvanced for Customization (2.1 MB)

使用说明书

一般规格书

New Legislative Framework (NLF) Conforming Products (362 KB)
UP55A Program Controller (1.1 MB)
List of RoHS (2011/65/EU) Directive Compliant Products (6-substances RoHS compliant products) (356 KB)

软件说明

技术信息

UTAdvanced UP55A Program Controller Parameter Maps and Lists (763 KB)
GREEN to UTAdvanced Conversion Tool Operation Guide (2.0 MB)
Preventive Maintenance of UTAdvanced series (48 KB)

产品图示

Model UP55A Program Controller (307 KB)
Model UP55A Program Controller (UP55A-NNN-xx-xx/x) (321 KB)
UTAdvanced Model: UTAP001 Terminal Cover for 96 x 96 mm (167 KB)

想要了解更多的信息，技术&解决方案？

联系我们

UTAdvanced UP55A

概述

概述

先进控制

简易性

网络

可靠性

应用软件

详细介绍

【Support Information】List of RoHS

【Support Information】UTAdvanced Series Parameter Maps and Lists

【Support Information】New Legislative Framework (NLF) Conforming Products

参考

下载

宣传彩页

使用说明书

一般规格书

软件说明

技术信息

产品图示