SMART 920 - 920 MHz Wireless Data Acquisition

Flexible transmission of important data

Flexible wireless communication

• Communication between the main unit and a SMART 920 remote unit can be established up to approximately 1 km in line of sight.
• The intelligent mesh network automatically recognizes unstable wireless links and re-routes data to a clear channel.

High speed, high reliability, multi-channel communication

• It is possible to communicate with 100 slave devices at 1 second update speeds.
• We can support a wide range of applications from small single point to large multi-point applications.

  
  ＊Monitoring
  Modbus master commands: Up to 100
  Communication channels: Up to 500
  (large memory type)

Notification by alarm when communication is disconnected

• In the unlikely event that wireless communications is interrupted whereas data cannot be collected, the master unit will inform you by alarm.

Can be easily installed in locations without power

• Since the GX70SM is a compact, battery-powered wireless input unit, it can be easily mounted and used in areas without power.
• With the arrival of a portable master recorder, you can change layout even more flexibly.
• Displays the GX70SM battery status on trends, numeric, bar graph, and other monitor screens.

Interpolation of data loss (when using GX70SM)  New

• If all communication routes are down, the GX70SM continues to collect data. It is possible to restore the data stored in the GX70SM into the missing record of the GX20 / GP20 / GM10.
• The module can retain 9000 points of logged data.
• If the wireless connection is interrupted for any reason, the missing data can be restored from the GM70SMs memory.

* 30 days at a 5-minute scan interval

Supports for the pharmaceutical field realized by wireless

Pharmaceutical warehouse temperature mapping and continuous monitoring  New

The wireless input unit (GX70SM) provides a continuous temperature mapping and recording solution in product storage areas. Plus, it can continuously monitor risk points throughout the warehouse.

Validation documents  NEW

• Additional verification protocols are available for the GX70SM wireless module. They can be combined with the SMARTDAC+  validation document (sold separately). You can reduce validation man-hours by using the GX70SM validation document, 773230/W.

It enables visualization (graphing) of power usage in factories, creating reports, and other tasks, and helps you identify areas of wasted power.

Power monitoring package

Monitor integrated values of watt hours with hourly, weekly, and monthly reports.
You can also compare with past data.

Monitor equipment operating conditions on production lines and other locations with the SMARTDAC 920

You can monitor equipment operating conditions on production lines and other locations. By incorporating computation functions you can tabulate downtime, count system shutdowns, and manage other data, and you can monitor and manage conditions on the master side.

See data in areas without power (when using GX70SM)

Improves status and remote monitoring

Storage warehouse door state and temperature monitoring

Monitor the temperature of the warehouse and check whether the door is open right from the office. Customize your display for immediate grasp of conditions.

Remotely Monitor Operating Conditions

Clean room The ability to remotely monitor conditions in clean rooms is crucial in industries such as pharmaceutical/bio-tech or food and beverage.

• No wiring needed
• Easy to add instruments
• Reduce the frequency of entering and exiting the clean room .... and other benefits 

Monitor and record the field data (temperature, flow and pH etc.) from the office building

Wirelessly connect to the temperature, flow, and pH values displayed on measurement panels distributed throughout the factory, and remotely monitor and record them.

The SMART 920 lineup of 920 MHz equipped instrumentation can be selected and deployed based on the application and the installation environment

As a master station

As a master unit, the SMART 920 equipped units will collect and record wireless data from products equipped as slave devices.

Panel Mount Recorder GX20	Portable Data Acquisition GP20	Modular Data Logger GM10

As a mesh network relay

These devices will reliably route wireless data across the mesh network to the master station. These unit will perform as range extenders or as smart routers, directing wireless data to the next relay with the strongest connection.

Modular Data Logger GM10	Temperature Controller / Gateway UT52A/UT32A

As a slave device

These devices collect process data that is wirelessly transmitted to the master station or repeater. Various mounting option are available. Along with simple point measurement, these units can provide a variety of I/O functions that can be monitored and controlled over the wireless network (PID control & ladder control). Remote devices that need to be monitored wirelessly but do not have wireless capabilities can be connected to the SMART 920 network by way of the Modbus gateway.

Wireless Input Unit GX70SM	Modular Data Logger GM10	Temperature Controller / Gateway UT52A/UT32A