Canada CA   
I used the parameter conversion tool to convert GREEN series data for the UTA series. I can’t add the CC-Link communication option code to the converted data.

I used the parameter conversion tool to convert GREEN series data for the UTA series. I can’t add the CC-Link communication option code to the converted data.

You can use the conversion tool. You don’t have to do anything after you create it.
The steps are as follows:

  1. Perform the Green conversion using the conversion tool.
  2. Write the converted file to the UTA (with the CC-Link option) main unit.
  3. Do an “upload all” from the main unit.
  4. Manually configure only the CC-Link parameters.
  5. Use file compare to confirm the differences.

 

Related Products & Solutions

Top