Middle East & Africa BH   
TC10
Control Devices

Temperature Controller TC10

The TC10 is a compact single loop temperature controller with an easy-to-read 3-color LED display. The shallow depth of the controller helps save to space. The TC10 supports easy configuration with codes for quick start-up.

Main Features

  • Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals)
  • 3 Dynamic Colors Led Display
  • Universal input: (TC, mV, V, mA, Pt100-Pt1000)
  • 4 Set Points and alarm functions
  • Serial communication : RS-485 Modbus
  • PID control, ON/OFF, Auto-tuning
  • IP65 front panel (when the optional panel gasket is mounted)(optional)

Resources

Application Note
Temperature Control for Seal-heating Parts in Wrapping Machinery
Thumbnail
Overview:

The TC series of temperature controllers is perfect for controlling the heating temperature of sealing parts and the temperature of sealing rolls (pre-heating) in a variety of different wrapping machinery.

Industries:
I want to use it as a display. Can I hide the SP display?
(ns-faq-ut-2202-spec)
Yes. Set DISP to nonE.
With thermocouple K input, can I display digits after the decimal point for the temperature?
(ns-faq-ut-2206-setting)
Yes, by changing the DP setting from 0 to 1. When you do this, the upper limit range of 1000°C becomes 999.9°C.
How many analog outputs are there?
(ns-faq-ut-2204-spec)
There is 1 analog output.
Can I use the DI function to switch between auto/manual and between run stop/start?
(ns-faq-ut-2205-spec)
Yes.
Is there a controller to which I can connect a 2-wire Pt1000 Ω sensor?
(ns-faq-ut-2217-select)
Yes, the TC10.
When installing the TC10, what is the depth in millimeters from the surface of the panel?
(ns-faq-ut-2220-spec)
62 mm. Reffer to Specifications
Does the TC10 support a 2-wire Pt1000 Ω?
(ns-faq-ut-2221-spec)
Yes. Refer to Specifications
Can I initialize parameters on the TC10?
(ns-faq-ut-2225-setting)
Yes. On the PASS screen, set “-481.”
Can I turn off the "°C" display with input other than temperature on TC10?
(ns-faq-ut-2226-spec)
Yes, if the input type is voltage or current.
What settings should I use to output PV transmission from ananalog output terminal on TC10?
(ns-faq-ut-2227-setting)
Set detailed parameter out group o1.F (output 1 function) = r.inP.
When using an external power supply with 2-wire wiring of TC10, what is the input resistance when inputting 4-20 mA?
(ns-faq-ut-2228-spec)
Approximately 24 Ω.
On the TC10, what does it mean if AL and 1 are lit?
(ns-faq-ut-2235-spec)
AL on the front of the TC10 is the alarm lamp. 1 to 4 indicate the status of outputs 1 to 4.
I want to use the detailed parameter setting method of TC10, but what number is the password?
(ns-faq-ut-2234-setting)
The default password is 30.
On the TC10, I want the difference lower limit alarm to be ON 5°C below the setpoint value. Do I need a minus sign ( - ) on the alarm setting value?
(ns-faq-ut-2236-setting)
Yes. Set an alarm value of -5°C.
I'm sending the temperature via PV transmission on TC10. Can I output in the 100% direction (20 mA or more) upon burnout?
(ns-faq-ut-2237-setting)
On burnout, it will be 0 mA. There is no parameter for specifying the output direction.
I selected SP value transmission on TC10, but no SP value is displayed.
(ns-faq-ut-2238-setting)
The SP value is not displayed if you don’t specify a control operation. Assign OP4 to the control output operation.
What is the I/O response time of the TC10?
(ns-faq-ut-2251-spec)
Approximately 2 seconds or less. (63% response when the input changes from 10% → 90%)
There's no SG terminal for wiring RS485 communication on the TC1. If the other instruments have an SG terminal, how should I wire it?
(ns-faq-ut-2252-connect)
Only wire the other instrument’s SG terminal.
What is the TC10’s warranty period?
(ns-faq-ut-2253-other)
18 months (a year and a half) after shipment from the factory.
Are the TC10’s wiring terminals screw terminals?
(ns-faq-ut-2254-spec)
No, they’re clamp terminals.
What is the measured current of the TC10's RTD input?
(ns-faq-ut-2255-spec)
Pt100: 150 μA Pt1000: 15.5 μA
I'm looking for a replacement for the UD310. Can it output the SP setting value?
(ns-faq-ut-2203-spec)
Yes.

Downloads

Brochures
Instruction Manuals
General Specifications
Technical Information
Certificates

Looking for more information on our people, technology and solutions?

Contact Us
Top