Executive Summary
Japan Wind Development Co., Ltd.,
Rokkasho, Aomori, Japan
Amidst growing concerns about the depletion of fossil fuels and the effects of climate changes caused by rising CO2 emissions and other factors, there is a growing push to generate power from wind, solar, biomass, and other renewable energy sources and thereby create a more sustainable society.
Japan Wind Development Co., Ltd. (JWD) is a specialist in wind power generation technology with vast knowledge and expertise in this field. JWD is building and providing all necessary support services for a nationwide wind power generation network.
In May 2008, JWD completed construction of a wind farm near Rokkasho village in Aomori Prefecture, in northern Honshu. This smart grid wind farm is the first facility of its type to use sodium sulfur (NAS) batteries to store electricity for supply to the national power grid. These batteries are charged at night, when the demand for power is lower, and the stored electricity can be supplied to the grid together with the electricity generated by the windmills during the daylight hours. This ensures a steady supply of power to the grid even during those periods when power production falls as the result of low wind speed.
To control the transmission of power from the Rokkasho wind farm to the national power grid, Tokyo Densan, a Yokogawa representative and systems integrator, successfully installed STARDOM network-based controllers and FA-M3 range-free controllers.
Facility Overview
Windmills: 1,500 kW x 34 units
NAS batteries: AC/DC converter 2 MW x 17 units
Transmission capacity: 51 MW
Transformer: Primary (154 kV/60 MVA), secondary (22 kV/60 MVA)
The Challenges and the Solutions
Steady power supply by reliable control system
To ensure a stable supply of power to the national grid even when power production dips as the result of low wind speed, the Rokkasho wind farm utilizes large-capacity NAS batteries.
The STARDOM network-based control system and FA-M3 range-free controllers play an important role in smoothing out the supply of this power to the grid. A power monitoring & control system and a battery control system are both configured in the dual redundant STARDOM controllers. FA-M3 range-free controllers are utilized to monitor and control each windmill. Controllers from other vendors are integrated with this system via an OPC interface. Factoring in the fluctuations in power production as a result of varying wind conditions, a power generation scheduling system calculates operation plan parameters and a power output pattern, based on which instructions are issued to each FA-M3 controller. The actual power output can be monitored on a trend graph. The operating status of each of the 34 windmills and the charge status for each of the 17 battery units can also be monitored together with various other types of operation data.
This power monitoring & control system carries out the following main functions:
- Operation planning and monitoring
Using the power generation scheduling system, operators can access the weekly operation plan data they need to draw up an operation plan for the next day. At their stations, operators can view graphic displays showing the power sales target, power generation plan, and battery charge-discharge plan. - Associated power monitoring
Operators can view data on total power output for the entire facility, battery charge status, and transformer operation status. - Windmill monitoring
For each windmill, data on power output, wind direction and speed, and operating status is displayed. - Battery monitoring
For each battery, the charge-discharge rate, charge status, and operation status is displayed. - Remote monitoring and control
Operations can also be monitored and controlled wherever network access is available.
Central control room
Total system configuration
Customer Satisfaction
The integrated control system allows JWD to manage the operation of each of its windmills and provide a steady supply of power to the national power grid. JWD plans to begin constructing wind farms outside Japan, and to this end is working together with Yokogawa and Tokyo Densan to develop the necessary high-speed systems and equipment. Through this development of renewable energy facilities, JWD hopes to make a lasting and significant contribution to the building of a more sustainable society.
Industrieën
-
Hernieuwbare Energie
Hernieuwbare energie helpt het milieu te beschermen. In vergelijking met conventionele energiebronnen zijn er echter bepaalde uitdagingen die een snelle invoering ervan in de weg staan, zoals hogere productiekosten en een grotere instabiliteit van de stroomtoevoer naar het net. Yokogawa levert oplossingen voor duurzame energietoepassingen op het gebied van besturing en instrumentatie om een stabiele bedrijfsvoering te bereiken en de productiviteit van installaties te verbeteren. Hiermee dragen we bij aan de doelstellingen voor duurzame ontwikkeling.
-
Stroom
Halverwege de jaren zeventig betrad Yokogawa de energiesector met de introductie van het EBS Electric Control System. Sindsdien is Yokogawa standvastig doorgegaan met de ontwikkeling van onze technologieën en mogelijkheden om onze klanten wereldwijd de beste diensten en oplossingen te bieden.
Yokogawa heeft het wereldwijde netwerk voor energieoplossingen beheerd om een actievere rol te spelen in de dynamische mondiale energiemarkt. Dit heeft een nauwer teamwerk binnen Yokogawa mogelijk gemaakt, waarbij onze wereldwijde middelen en branchekennis bij elkaar zijn gebracht. De experts uit de energiesector van Yokogawa werken samen om elke klant de oplossing te bieden die het beste aansluit bij zijn geavanceerde eisen.
-
Windenergie
De laatste jaren zijn wereldwijd veel windmolenparken met grote aantallen windturbines gebouwd, en offshore windmolenparken worden nu ook populair. Yokogawa levert oplossingen die bijdragen aan een stabiele stroomvoorziening. Door de bedrijfsvoering efficiënter te maken, bewaking op afstand en centrale bewaking van meerdere systemen voor de opwekking van windenergie.
Gerelateerde producten & oplossingen
-
Autonomous Controller (FCN-500)
High reliability and high speed are essential for the systems that control your critical processes. The dual redundant model of the field control node (FCN) autonomous controller ensures that these processes continue without interruption even when a module is replaced.
-
Low Power Consumption Autonomous Controller (FCN-RTU)
The low power consumption model of the field control node (FCN) autonomous controller meets the demanding requirements at inhospitable remote locations which lack power.
-
Versatile Data Server Software (VDS)
Versatile Data Server Software (VDS) is Web-based HMI/data server software that adds advanced architecture to the conventional HMI/SCADA functionality.
-
Process Control PLC/RTU
Van procesinstallaties tot afgelegen locaties, de procesbesturings-PLC en Remote Terminal Unit (RTU) helpen gebruikers de operationele excellence te maximaliseren.