Belgium (NL) BE-NL   
I can't engage CAS with the front panel keys (with the YS1700, YS1500, YS1350, or YS1360).

I can't engage CAS with the front panel keys (with the YS1700, YS1500, YS1350, or YS1360).

Please check the following 3 points.

  1. Is an input signal going to the cascade input terminal? If the cascade input terminal is open (IOP), the instrument is designed not to change from AUTO to CAS.
  2. Is CMOD1=CAS or CMP set?
  3. Is the operation mode AUTO? The instrument is designed not to move directly to CAS from MANUAL. Switch to AUTO using the A key, and then press the C key.

Note: To avoid changing modes unintentionally, the instrument is designed so that you have to hold down the C/A/M key for approximately 1 second or longer to switch modes.

 

Gerelateerde producten & oplossingen

  • YS1350/YS1360

    The YS1350 is a manual setter that allows for manually outputting setting signals to controllers and the like. The YS1360 is a manual setter that allows for manually outputting operation signals to operation terminals.

    Meer

  • YS1500

    The YS1500 Indicating Controller incorporates fundamental control functions required for PID control. Necessary functions can be selected in accordance with the user's purpose.

    Meer

  • YS1700

    The YS1700 Programmable Indicating Controller can be tailored for various applications by running a user program, and offers high reliability thanks to Yokogawa's proprietary technology, user friendliness, and expandability.

    Meer
Top