Questions fréquentes

An exclamation point "!" is displayed on the DAQ32Plus hard disk icon.

(ns-faq-daqworx-13052-spec)

Questions fréquentes

The DA100 and DAQ32Plus are connected, but I can't record.

(ns-faq-daqworx-13051-connect)

Questions fréquentes

Can I automatically convert measured data files to Excel on DAQ32Plus?

(ns-faq-daqworx-13053-spec)

Questions fréquentes

I want to set an IP address on the DA100 Ethernet module by using DAQ32Plus. When I place the dip switches in Config mode and press "Check," error E3339 appears. How should I enter settings? My PC uses Windows 7, with the latest version of DAQ32Plus.

(ns-faq-daqworx-13064-connect)

Questions fréquentes

Can I monitor and record on two DA100s using DAQ32Plus?

(ns-faq-daqworx-13038-spec)

Questions fréquentes

When purchasing a DAQ32Plus upgrade license (WX102UP), what sort of license number is required?

(ns-faq-daqworx-13065-other)

Questions fréquentes

How can I perform strain initial balancing on DAQ32Plus?

(ns-faq-daqworx-13050-spec)

Questions fréquentes

How can I view historical data files (*.daq) and reports (*.rbi) from DAQ32 and DAQ32Plus on a Windows 10 PC?

(ns-faq-daqworx-13078-spec)

Questions fréquentes

What communication formats are compatible with DAQ32Plus?

(ns-faq-daqworx-13040-connect)

Questions fréquentes

I set the same IP address on the DR241 and PC to connect via Ethernet, but there's no communication.

(ns-faq-daqworx-13039-connect)

Questions fréquentes

How many data can be displayed along the time axis in DAQ32Plus' real time trend display?

(ns-faq-daqworx-13049-spec)

Questions fréquentes

I've set the host name and port number on the DAQ32Plus client, but am unable to connect.

(ns-faq-daqworx-13043-connect)

Questions fréquentes

Can I view DAQ32Plus real time trends on multiple PCs?

(ns-faq-daqworx-13046-spec)

Questions fréquentes

When assigning DAQ32Plus groups, can I arbitrarily sort channels independently of the sorting on the DA100? Also, can I register channels to multiple groups?

(ns-faq-daqworx-13048-spec)

Questions fréquentes

How many groups, and how many channels per group can be displayed in the DAQ32Plus real time trend screen? Also, can I set the display span on the DAQ32Plus side only?

(ns-faq-daqworx-13047-spec)

Questions fréquentes

I'm using DAQ32Plus. I set an alarm on the DARWIN (DC100). When the measured value rises, an alarm appears in the DARWIN (DC100) screen, but in the DAQ32Plus screen the alarm stays green (doesn't turn red).

(ns-faq-daqworx-13067-soft)

Questions fréquentes

Can DAQ32 monitor 30 channels worth of data?

(ns-faq-darwin-8023-spec)

Questions fréquentes

When connecting the DA100 and monitoring trends, the PC's time differs from the time displayed in the trends.

(ns-faq-daqworx-13045-spec)

Questions fréquentes

DAQ32Plus can't communicate with the DA100 via Ethernet.

(ns-faq-daqworx-13042-connect)

Questions fréquentes

When I connect the DA100 via RS-232-C and use DAQ32 Plus to acquire data, the performance bar goes to OVER and I lose data. What should I do?

(ns-faq-darwin-8027-spec)

Questions fréquentes

Can I forcibly turn the alarm output modules ON/OFF from a PC regardless of any input data alarms?

(ns-faq-darwin-8055-spec)

Questions fréquentes

I’m trying communication from a RS232C communication module (DT300-31) to a recorder using DAQ32 software, but *E0401 Communication error* is displayed and communication fails.

(ns-faq-darwin-8068-connect)

Questions fréquentes

What is the temperature measurement interval of the universal module's RJC (INT)?

(ns-faq-darwin-8051-spec)

Questions fréquentes

When I add a module and configure the system, are the settings initialized?

(ns-faq-darwin-8058-spec)

Questions fréquentes

When measuring voltage with a universal input module or DCV/TC input module, what is the limit value where an overrange occurs?

(ns-faq-darwin-8029-spec)

Questions fréquentes

Does DARWIN support Windows XP?

(ns-faq-darwin-8017-spec)

Questions fréquentes

What internal processing occurs of the DI input (non-voltage contact input) from the universal input module and DCV/TC/DI modules?

(ns-faq-darwin-8050-spec)

Questions fréquentes

When I changed to Windows 7, I couldn't change the IP address of the Darwin Ethernet module. What should I do?

(ns-faq-darwin-8018-setting)

Questions fréquentes

Can I connect the main unit to a company network?

(ns-faq-darwin-8019-connect)

Questions fréquentes

When I acquire DI input with the BFD32 and perform statistical computation (averaging) on the Viewer software, I get computation errors 0 and 1.

(ns-faq-darwin-8004-spec)

DP320-8x (DISCONTINUÉ)

Ressources