Introduction
Blending plays a key role in industries like food, healthcare and chemicals etc. Temperature and vacuum measurements are very important in minimizing the moisture content to ensure the quality of the final product. Strictly maintaining them throughout the process ensures the final product yield.


Expected Benefits
- Improved productivity;
Continuous online measurement of temperature and pressure ensures the quality of product. - Enabled online measurement of rotating dryer;
NO signal cables, NO power cables, NO cable damage - Enabled easy integration with host system through Modbus;
YFGW410 supports Industry proven Modbus platform, that enables easy and seamless integration with a wide range of host system. - Minimized maintenance cost;
Non-proprietary batteries standardized for the entire product range.
YFGW520 (Field Wireless Access Point)
YFGW410 (Field Wireless Management Station)
YTA510 (Temperature Transmitter)
Challenges
- No online monitoring of temperature or pressure measurements
- Lack of precision measurements, currently only using local gauges
- Reading errors induced by human error, leading to lower product quality
Solution
For rotating equipment;
Eliminating the wire by ISA100 wireless transmitter is the perfect solution.
Battery operated transmitters are installed directly on the rotating dryer and the wireless gate-way is located approx.50m away on a support. Even though the dryer is rotating, reliable communication is established between the transmitters and the gateway.
ISA100 wireless system ensures accurate remote measurements throughout the entire process.
Accurate –Dependable sensors for measurement
Simple –Seamless integration with existing host system
Conclusion
Eliminating cables, complex connectors and slide rings on rotating equipment have greatly simplified the whole installation and process. The ISA100 wireless transmitter and the gateway have fulfilled this mission and have delivered real productive gains for the user. Ongoing maintenance costs have been significantly reduced by the wireless architecture.
Looking for more information on our people, technology and solutions?
Contact UsLes produits et solutions liés
-
EJX530B Wireless In-Line Mount Gauge Pressure Transmitter
Le transmetteur de pression relative sans fil haute performance EJX530B comprend un capteur résonant en silicium monocristallin et convient à la mesure de liquide, de gaz ou de vapeur.
-
YFGW410 Station de terrain pour gestion de réseau sans fil
La station de gestion sans fil YFGW410 est basée sur la norme de communication sans fil ISA100.11a pour l'automatisation industrielle de la société ISA (International Society of Automation).
-
YFGW510/YFGW520 Point d’accès au réseau de terrain sans fil
Le point d'accès sans fil de terrain YFGW520 est basé sur la norme de communication sans fil ISA100.11a pour l'automatisation industrielle de la société ISA (International Society of Automation). Ce produit possède une fonction de routeur de réseau principal basée sur ISA et sa combinaison avec la station de gestion sans fil (YFGW410) et / ou le convertisseur de média sans fil (YFGW610) constitue le système sans fil
-
YFGW520 Field Wireless Access Point
YFGW520 Field Wireless Access Poin has backbone router function based on ISA, and combining this with Field Wireless Management Station (YFGW410) and/or Field Wireless Media Converter (YFGW610) composes the field wireless system.
-
YTA510 Transmetteurs de Température Sans Fil
Le transmetteur de température haute performance YTA510 accepte les entrées thermocouple, RTD, ohms ou DC volts. Les émetteurs transmettent non seulement les variables de processus, mais également les paramètres de réglage à l'aide d'un signal sans fil. Les transmetteurs fonctionnent avec des piles et le coût d’installation peut être réduit car le câblage est inutile. La communication est basée sur les spécifications du protocole ISA100.11a.
-
Infrastructure Sans fil
Yokogawa propose une passerelle conforme à l'IoT compatible ISA100, un point d'accès, un convertisseur de média et une station de gestion. Tout cela pour vous aider à concevoir un réseau répondant à vos besoins.
-
Transmetteurs de pression et de pression différentielle sans fil
Yokogawa offre une gamme complète de transmetteurs de pression conformes à la norme ISA100. La gamme comprend des transmetteurs qui peuvent mesurer la pression différentielle, la pression absolue et la pression manométrique à l'aide d'une variété de raccords process différents.
-
Wireless Temperature Transmitters
Yokogawa propose le YTA510 à double entrée et le transmetteur de température multipoint YMTX580.