Australasia AU   
To connect the GX60 expansion unit to the SMARTDAC+ GX/GP series I installed the GX90EX expansion module in the GX/GP and reconfigured, but the expansion unit is not recognized. What should I do?

To connect the GX60 expansion unit to the SMARTDAC+ GX/GP series I installed the GX90EX expansion module in the GX/GP and reconfigured, but the expansion unit is not recognized. What should I do?

1) Install the GX90EX expansion module into one of the following slots.
  GX10, GP10: Slot 2 (1st slot on the left when facing the back)
  GX20, GP20: Slot 9 (1st slot on the left, upper row, when facing the back)
2) Set the GX90EX expansion module's dip switches as follows.
  No. 8 (master I/O operation) = ON, No. 1-4 (unit no.) = All OFF

Related Products & Solutions

  • Touch Screen GP10/GP20

    The SMARTDAC+TM GP10/GP20 is a portable paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GP utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    See More

  • Touch Screen Paperless Recorder GX10/GX20

    The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GX utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    See More
Top