GD402/GD40 Gas Density Analyzer

The GD402 gas density analyzer and GD40 gas density detector provide continuous measurement of gas density as well as other valuable parameters, including specific gravity and percent concentration.

In applications where accurate, repeatable measurement of gas density is essential, Yokogawa’s family of gas density products deliver superior performance and reliability. From blending of fuel and product quality to hydrogen purity and replacement in utility turbines, our gas density analyzers provide accurate measurements with ease of maintenance and operability.

System

GD402 Analyzer

GD402 gas density analyzerThe GD402 is a rugged microprocessor-based converter designed in two versions to meet both general area and explosion-proof application requirements. In addition to the display of several key data items, the converter also provides the choice of three different means for calibration: automatic, semi-automatic, and one-touch manual operation. Features of the GD402 include:

  • Proven Design
  • Many detector features
  • Simple interface
  • Low installation cost

GD40 Detector

GD40 gas density detectorThe GD40 detector is designed for intrinsically safe and flameproof, explosion protected applications. It is designed to be virtually maintenance free for all accepted applications. Features of the GD40 include:

  • Low installation cost
  • Virtually maintenance free
  • Not affected by dust or oil mist

 

Features

Robust Measurement Technology

A vibrating spool within the analyzer is resistant to contaminant build up and can survive being filled with liquid, resulting in increased measurement availability and process uptime. In addition, low maintenance is required with no replacement parts and no specialty gases to calibrate.

Unlike other density meters, the GD does not require the use of utilities such as heating or reference air, reducing operation costs and system complexity.

 

gas density analyzer

Resources

Overview:

The top gas generated at the top of a distillation column in a petroleum refinery's fluid catalytic cracker (FCC) is used to produce gasoline and LPG. The GD402 Gas Density Meter features an intrinsically safe and explosion-proof design, fast response, and a dust-proof, anti-corrosive, and flame-proof construction.

Application Note
Overview:

In the manufacturing of Glass-Fiber wool for insulation a melt of a material such as glass is inductively heated at a stage intermediate an initial liquefying stage and a refining stage. Induction heating is the process of heating an electrically conducting object (usually a metal) by electromagnetic induction, where eddy currents are generated within the metal and resistance leads to Joule heating of the metal.

Overview:

The U.S. refineries represent approximately 23 percent of the world's petroleum production, and the United States has the largest refining capacity in the world. Petroleum refining is an industry, which is undergoing intense amounts of scrutiny in the United States from regulatory agencies and environmental groups. As a result, releases of pollutants caused by corrosion leaks are becoming a high consequence event.

Overview:

A major power company in the Southeast decided to replace its hydrogen gas detection system. The current system was unsupported by the manufacturer and failing. The new system would need to duplicate the functionality of the old to minimize the training and impact on the operators. Yokogawa was asked to facilitate the project.

Industries:
Application Note
Overview:

Liquefied Petroleum Gas (LPG), or also known as LP Gas or auto gas, is a mixture of hydrocarbon gases used as a fuel in heating appliances and vehicles, and increasing replacing chlorofluorocarbons as an aerosol propellant and a refrigerant to reduce damage to the ozone layer.

Industries:
Application Note
Overview:

The U.S. refineries represent approximately 23 percent of the world's petroleum production, and the United States has the largest refining capacity in the world. Petroleum refining is an industry, which is undergoing intense amounts of scrutiny in the United States from regulatory agencies and environmental groups.

Industries:
Yokogawa Technical Report
Overview:

We rolled out the first vibratory gas density meter ten years ago and since then have continued supplying it. The past ten years have seen changes in the target applications and requirements for functions that have made it easier to use.

Media Publication
Edition 1 1
Overview:

Vibrating element (VBE) type gas measurement devices measure refinery reformer stream compositions, power generator hydrogen purity, centripetal compressor gas inputs, process heater fuel gas quality, and others in multiple process control environments.

The 4/20 mA output is isolated from the input signal (the detector) but they share the same ground. If you need isolated 4/20ma outputs, you need to use 4/20 isolator (optically isolated). For that purpose, you can use a Juxta signal isolator. ...
If your analyzer has been up and running properly but when you try to calibrate you receive an "alm 10" code, then clean the detector and try again.    See the below for cleaning instructions ...
Whenever you are installing a gas density system, it is important to match the detector (GD40) to the analyzer (GD402). This applies to completely new installations, as well as when a GD40 detector is being used with a different analyzer. To match th...

Downloads

Videos

Overview:

Pairing a GD40G/GD402G gas density detector with the gas density analyzer. 

Overview:

This video shows you how to set the unit up the GD402G for hydrogen purity measurement. 

Looking for more information on our people, technology and solutions?

Contact Us

Top